You may also like
Hammer Drill Bits SDS-Plus Dia 3/4" 8" (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Sub Division:
- Electrical-E H2
- Department:
- Tools
- Product Group:
- Power Tools & Accessories
- Product Subgroup:
- Drill & Driver Bits
- Product Type:
- Masonry Drill Bit
Metallics SDS348 – Frequently Asked Questions
1) Will the Metallics SDS348 drill bit fit my rotary hammer?
The SDS348 has an SDS-Plus shank, so it drops into any SDS-Plus rotary hammer without a chuck key. It will not fit an SDS-Max or spline-drive hammer, and it is not meant for a standard three-jaw keyed or keyless drill chuck.
2) What size hole does the Metallics SDS348 bit drill, and how deep can it go?
It cuts a 3/4 inch diameter hole. Overall length is 8 inches, so usable drilling depth is less than that once the shank is seated in the hammer, which makes it a bit for anchors and short through-holes rather than deep slab penetrations.
3) Is a 3/4 inch SDS-Plus bit the right choice for setting concrete anchors?
For wedge anchors, sleeve anchors, or drop-in anchors that call for a 3/4 inch hole in concrete or masonry, the SDS348 is the matching bit. Anchor hole size is nominal to the anchor diameter, so confirm the anchor manufacturer's specified hole diameter is 3/4 inch before drilling. For smaller anchor sizes you need the corresponding smaller-diameter SDS-Plus bit, not this one.
4) Can I use the SDS348 to drill through metal or wood?
No. It is a hammer drill bit with a carbide tip for concrete, block, brick, and stone under rotary hammer action. Steel needs an HSS or cobalt twist bit and wood needs an auger or spade bit; a masonry hammer bit will burn or wander in either.
5) How many bits come in a Metallics SDS348 order?
One bit per pack, supplied in a pouch. If you are standardizing a crew or stocking a service truck, order the quantity you need, since this is not a multi-size set.
6) What part number do I order for the Metallics 3/4 inch by 8 inch SDS-Plus bit?
Order Metallics SDS348. That is the manufacturer part number for the 3/4 inch diameter, 8 inch SDS-Plus hammer drill bit.
How fast can I get the Metallics SDS348 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics SDS348 come with a warranty?
Absolutely. The Metallics SDS348 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics SDS348?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics SDS348 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.