You may also like
Metallics JG8HC2334 Bolts 3/8-16 X 3/4 G8 Hxbt St-zn (Jar 100)
Model: MET-JG8HC2334
Bolts 3/8-16 X 3/4 G8 Hxbt St-zn (Jar 100)
Features
A cap screw made from medium carbon steel and heat-treated
Used in automotive and fleet industries, where greater tensile strength is required...
Metallics
$50.70
$0.70
Hanger Bolts 3/8-16 X 4 St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Bolts
Metallics JHAB13 – Frequently Asked Questions
1) What thread size and length are the Metallics JHAB13 hanger bolts?
The JHAB13 hanger bolt is a 3/8-16 x 4 inch bolt in zinc plated steel. The machine thread end takes 3/8-16 nuts, couplings, and threaded-rod accessories, so it is the piece you use to transition from a wood structural member to 3/8 inch threaded hardware for hanging pipe, conduit, strut, or fixtures.
2) Will a 3/8-16 x 4 hanger bolt work for hanging conduit or pipe from wood joists?
Yes, that is the normal use. The lag end threads into the joist or wood blocking and the 3/8-16 machine thread end is left exposed for a nut, a rod coupling, or a hanger clamp. At 4 inches overall you get enough embedment in dimensional lumber while still leaving usable thread below the surface for the fitting.
3) How many hanger bolts come in a jar of Metallics JHAB13?
One hundred bolts per jar, packed in a jar rather than a box, which is what makes it practical to keep on the truck for repetitive overhead hanging work.
4) Can zinc plated hanger bolts be used outdoors or in a damp location?
Zinc plating on the JHAB13 is a general indoor and dry-location finish. It resists handling corrosion and incidental moisture, but for sustained exterior exposure, wet locations, or treated lumber, specify a hot dip galvanized or stainless hanger bolt instead.
5) Do I need a nut and washer to use the Metallics JHAB13 hanger bolt?
The jar contains hanger bolts only. Whatever is going on the machine thread end, a 3/8-16 hex nut, a flat washer, a rod coupling, or a pipe hanger ring, is ordered separately. Also plan on a pilot hole and either a locking pliers grip or a hanger bolt driver, since there is no head to drive.
6) What is the Metallics part number for the 3/8-16 x 4 hanger bolt?
Order it as Metallics JHAB13. That number covers the 3/8-16 x 4 zinc plated hanger bolt in the 100 count jar.
How fast can I get the Metallics JHAB13 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JHAB13 come with a warranty?
Absolutely. The Metallics JHAB13 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JHAB13?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JHAB13 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.