You may also like
HangerMate 1/4-20 x 1-1/2 HzlStl Rod Hng with Nut (Jar 25)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Nuts
Metallics JPFMMH224115N – Frequently Asked Questions
1) What size threaded rod does the Metallics HangerMate JPFMMH224115N accept?
It takes 1/4-20 threaded rod. The internal thread is 1/4-20, so standard 1/4 inch all-thread rod threads straight into the head once the screw is driven. If your hanging run uses 3/8-16 rod, this is the wrong size fastener.
2) What is a HangerMate rod hanger actually used for on an electrical or mechanical job?
It's a one-piece anchor that gives you a threaded female head for suspending 1/4-20 rod from a structure, instead of setting an anchor and then adding a separate rod coupling. Electricians use them to hang trapeze and strut for conduit runs, and mechanical trades use them for pipe and duct hangers. Drive the 1-1/2 inch screw, thread the rod in, tighten the nut.
3) How long is the screw on the Metallics JPFMMH224115N rod hanger?
The screw measures 1-1/2 inches, which is the embedment portion that drives into the structure. The 1/4-20 threaded head stays exposed to receive the rod.
4) How many HangerMate rod hangers come in the Metallics JPFMMH224115N jar?
25 pieces per jar, and each one ships with its nut. Pack type is a jar rather than a carton or bag, so it's sized for a service truck or a shop shelf rather than a full-building rough-in.
5) Does the Metallics HangerMate JPFMMH224115N include the nut, or do I order that separately?
The nut is included with each hanger, so you're not buying it as a separate line. The nut is what locks the threaded rod off at the head once it is run up.
6) What material is the Metallics JPFMMH224115N HangerMate made from?
Hardened steel. That's the version meant for driving into harder base material rather than a plain low-carbon fastener. Bare hardened steel is for dry interior work; it carries no stated corrosion coating, so don't specify it for exterior or wet locations.
7) I need to order the Metallics 1/4-20 x 1-1/2 HangerMate by part number. What is it?
Metallics part number JPFMMH224115N covers the 1/4-20 x 1-1/2 hardened steel HangerMate rod hanger with nut, 25 to a jar. There's a single configuration under that number, so no finish or length suffix to add.
How fast can I get the Metallics JPFMMH224115N delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPFMMH224115N come with a warranty?
Absolutely. The Metallics JPFMMH224115N is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPFMMH224115N?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPFMMH224115N from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.