Metallics JPFMWH2261000 HangerMate 1/4 x 1 Hzl Wood Rod Hng (Jar 25)

It's a rod hanging anchor screw for wood structure, sized 1/4 x 1 and set up for horizontal mounting. You drive it into a wood member (joist, beam, blocking) and it gives you a threaded point to hang a 1/4 inch hanger rod from, which is how electricians and mechanical trades suspend conduit, strut, pipe and cable tray without drilling the structure for a through bolt.

No. This HangerMate is the wood version, so it needs a solid wood member to hold. For concrete, steel or sheet metal deck you need the HangerMate variant made for that base material, not this one. Driving a wood-thread anchor into masonry will not develop any hold.

It ships as a jar of 25. That's a practical count for a single branch run or a service call kit rather than a full-building hanging package, so for a large job figure your hanger spacing first and order jars to match.

Horizontal refers to the orientation of the load path, not the screw. It's intended for driving into the underside of wood framing so the rod hangs down vertically and the load pulls straight out of the screw's axis. If you need the rod coming off the side of a member or at an angle, use the vertical or angled HangerMate style instead.

The anchor only gets you a threaded connection in the wood. You still supply the 1/4 inch threaded rod cut to drop length, plus whatever receives the conduit at the bottom, typically a conduit hanger, clevis, or strut with 1/4 inch rod nuts and washers. None of that comes in the jar.