HES 9100 Surface Mounted Elect...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$815.00
$493.96
HES HES-9100

HES 9100 Surface Mounted Electric Strike

(No reviews yet) Write a Review

Model: 9100R-630
$815.00
$493.96
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$815.00
$493.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

HES 9100 Surface Mounted Electric Strike for Glass Single Doors with Vertical Rods

The innovative 9100 electric strike sets a new industry standard for glass openings with tubular, vertical rod exit devices. The low-profile 9100 offers simplified retro-mounted installation within the existing mechanical prep to provide fast and easy installation without the need to cut the frame. Integrated adjustability provides optimal latch positioning to accommodate demanding installations. The 9100 has adaptable voltage sensing technology which allows the product to function in ranges from 12 through 24 volts with no required wiring selection. Available with field selectable fail safe/ fail secure functionality and monitoring options for maximized versatility. The 9100 exceeds Grade 1 standards and is designed with the strength and durability to meet UL outdoor rating requirements.


Application

  • Adjustability : Fully Adjustable
  • Surface Mounting : Yes
  • Frame Material : Aluminum|Hollow Metal|Wood
  • Shim Type : Field Adjustable
  • Latchbolt Accommodation (in) : 5/8 - 3/4
  • Lock Type : Exit Device

Electrical

  • Voltage : 12/24
  • Monitoring Installation : Factory Configured|Field Installable
  • Monitoring Options : Latchbolt Monitoring
  • Current 12v DC (mA) : 240
  • Current 24v DC (mA) : 120

Standard Features

  • Retro-mount using existing header prep
  • No cutting required
  • Integrated adjustability
  • Adaptable voltage sensing technology (12-24 VDC)
  • Factory configured or field installable monitoring
  • Static strength 1,500 lbs
  • Dynamic strength to 70 ft-lbs
  • Endurance 1 million cycles
  • Field selectable fail secure/fail safe
  • Quiet operation
  • Stainless steel construction
  • SecuriCare five-year, no-fault, no questions asked warranty

Finishes

  • 630 - Satin stainless steel
  • 605 - Bright brass
  • 606 - Satin brass
  • 612 - Satin bronze
  • 613E - Dark Oxidized Bronze Equivalent
  • 629 - Bright stainless steel
  • BSP - Black Suede Powdercoat

CERTIFICATIONS & LISTINGS

  • UL 10C-fire-rated, 3 hour (fail secure)
  • CAN4-S104(ULC-S104) fire door conformant
  • NFPA 80-07 Compliant
  • UL 1034 burglary-resistant listed and suitable for outdoor use
  • UL 294 listed
  • ANSI/BHMA A156.31, Grade 1
  • NFPA -252 fire door conformant
  • ASTM-E152 fire door conformant

Product Specs

Subcategory:
Electric Strikes
Product Group:
Electronic Access Controls
Series:
9100 Series
Grade:
Grade 1
Shim:
Field Adjustable
Dynamic Strength:
70 ft-lbs
Warranty:
5 Year
Endurance Cycles:
1,000,000
Product Subgroup:
Electric Strikes
Product Type:
Electric Strikes
Door Type:
Hollow Metal, Wood, Aluminum
Lock Type:
Exit Device
Outdoor Rated:
Yes
Preload Capable:
No
Windstorm Rated:
No
Commercial/Residential:
Commercial
Electronic:
Yes
Power:
Power over Ethernet (POE)
Battery Operated:
No
Fail-safe / Fail-secure:
Field Selectable
Holding Force:
1500
Product Model:
HES-9100
Product Voltage:
12/24 VDC
Face Plate:
6"
Fire Rating:
Yes
Latch Specification:
Latchbolt
Door Strike:
1-5/16"
Product Substrate:
Stainless Steel
Product Category:
Electronic Access Controls
Product Width:
1-7/8"
Department:
Door Hardware
Product Depth:
5/8"

HES 9100R-630 – Frequently Asked Questions

1) Do I have to cut the header to install the HES 9100?
No cutting. The 9100 retro-mounts inside the existing mechanical header prep, and the shim is field adjustable so you can dial in latch position without machining the frame. That is the main reason it gets specified on glass storefront openings, where cutting the header means pulling the door and the glass out of the way first.
2) What voltage does the HES 9100 strike run on, and do I have to set it?
12 or 24 VDC, and there is nothing to set. Adaptable voltage sensing lets the strike find the supply itself, so no jumper or wiring selection at install. Current draw is 240 mA at 12 VDC and 120 mA at 24 VDC, which is what you size the power supply and the run of wire against when several openings share one supply.
3) Is the HES 9100 fail safe or fail secure?
Either one, selected in the field on the strike, so you do not have to decide at the order desk. Fail secure keeps the door locked when power drops; fail safe releases it. One caveat that matters on a fire rated opening: the UL 10C 3 hour fire rating applies in the fail secure setting. A fire door has to stay latched under fire conditions, so set it fail secure there and handle egress through the exit device.
4) Can an electric strike be used on an exterior glass door that gets weather?
The HES 9100 is UL 1034 burglary-resistant listed and suitable for outdoor use, and it is stainless steel throughout. It is not windstorm rated, so it should not be counted on for a hurricane or debris-impact opening.
5) What do I need to specify when ordering an HES 9100 strike?
Four decisions. Handing, either Left Hand/Right Hand Reverse or Right Hand/Left Hand Reverse. Monitoring, which is either LBM with a latchbolt monitor, LBSM with a latchbolt strike monitor, or the plain universal strike body with none. Fail safe or fail secure, which is called out on the order but is also selectable on the job. And finish, from 605 bright brass, 606 satin brass, 612 satin bronze, 613E dark oxidized satin bronze, 629 bright stainless, 630 satin stainless, or BSP black suede powdercoat.
6) My exit device latch binds against the strike. Will the 9100 solve alignment problems?
Integrated adjustability is built into the 9100 and the shim is field adjustable, so latch position can be tuned on the opening rather than by re-prepping the header. What it will not do is release under load: the 9100 is not preload capable, so a door pushed hard against the frame by a closer or a stack pressure problem still needs the door and closer corrected first.
7) Can I use the HES 9100 on a cylindrical lockset or a mortise lock?
No. The 9100 is a strike for exit devices, specifically tubular vertical rod devices on glass doors, and it is not the part for a knob, lever, or mortise lock. For a cylindrical lockset, the Von Duprin 4211 is a Grade 1 fire rated strike for cylindrical locks; for a mortise lock, the Von Duprin 6210 is UL 10C fire rated, or the Hager 2930 covers both cylindrical and mortise with 12/24 VDC dual voltage.
8) Does the HES 9100 electric strike meet fire door code for my building?
It is UL 10C fire rated for 3 hours in the fail secure setting, conformant to CAN4-S104 (ULC-S104), NFPA 252, and ASTM E152, and compliant with NFPA 80-07. It is also UL 294 listed for access control use and carries ANSI/BHMA A156.31 Grade 1. That set covers the usual submittal for a fire rated opening in a school, hospital, or government facility.
9) What is the closest equivalent to the HES 9100 for a glass door with a vertical rod exit device?
The HES 9100 is purpose-built for that opening: it is a surface mounted, retro-mount electric strike that installs in the existing header prep without cutting the frame, accommodates 5/8 to 3/4 inch latchbolts, and carries ANSI/BHMA A156.31 Grade 1 with UL 10C 3-hour fire rating in fail secure. Among other strikes, the Locknetics NC450 is also built as a no cut electric strike, and the Camden CX-ED1689L-4 is a fire rated low profile universal strike supplied with four faceplates. Both are jamb-side strikes for latching hardware rather than header units sized to a tubular vertical rod glass door, so confirm the exit device and header prep before treating either as the same install.
10) I need a Grade 1 fire rated electric strike but the opening is a hollow metal frame with a cylindrical lock, not a glass door. What should I use instead of the HES 9100?
The HES 9100 is set up for exit device hardware and a 5/8 to 3/4 inch latchbolt, so a cylindrical lockset in a hollow metal frame is a different application. The Von Duprin 4211 is a Grade 1, fire rated, heavy duty electric strike for cylindrical locks with 12/24 VDC field-selectable operation, and the Hager 2930 is a fire rated Grade 1 strike for cylindrical and mortise locks with 12/24 VDC dual voltage. The Adams Rite 7240 is a fire-rated strike for cylindrical locksets with 5/8 inch latchbolt projection. All three keep the fire rating the 9100 carries while matching lockset hardware instead of an exit device.
11) What electric strike works for an aluminum storefront jamb rather than the header, like the HES 9100 is used on?
The HES 9100 mounts in the header prep of a glass door with a tubular vertical rod exit device. For a strike that goes into the aluminum jamb instead, the Adams Rite 7100 Series is an electric strike for aluminum jambs with a flat 1-1/4 x 4-7/8 inch faceplate, and the Adams Rite 7160 is an aluminum jamb strike with the same 1-1/4 x 4-7/8 inch faceplate. Both are not fire rated, where the 9100 is UL 10C fire rated for 3 hours in fail secure, so if the opening is in a rated assembly the jamb strikes will not carry it.
12) Which other electric strikes offer latchbolt monitoring like the HES 9100?
The HES 9100 offers latchbolt monitoring, factory configured or field installable, and is ordered as a plain strike body, an LBM body with latchbolt monitor, or an LBSM body with latchbolt strike monitor. Among other strikes, the Hager 2945 is a fire rated rim exit strike with field selectable fail safe or fail secure and a latchbolt monitor, the Dortronics 3300 Series includes a latch bolt sensing switch at 12/24 VDC with a strike plate for ANSI prep at 4-7/8 x 1-1/4 inches, and the Camden CX-ED1799L-8 is a Grade 1 fire rated dual monitor strike supplied with eight faceplates. The Hager 2945 and the 9100 are both exit device strikes; the Dortronics 3300 is an ANSI prep jamb strike.
13) Can I use a Trine 004 strike in place of the HES 9100?
They are not interchangeable. The Trine 004 is fire rated with a 6-1/4 x 1-3/8 inch faceplate and up to a 5/8 inch throw, but it runs on 8-16 VAC and is fail secure only. The HES 9100 runs 12 through 24 VDC with adaptable voltage sensing and is field selectable between fail safe and fail secure, and it retro-mounts in an existing header prep for a glass door with vertical rod exit hardware. If the opening needs fail safe operation or a DC supply, the Trine 004 does not cover it; if the access control panel supplies low voltage AC, the 9100 does not.
14) Should I add latchbolt monitoring to the 9100, or can I add it later?
Either way. Monitoring can be factory configured on the strike you order, or field installed later on a body already in the door, so a building that has no access control head end yet is not locked out of adding door status later. Two monitor versions exist: LBM, a latchbolt monitor, and LBSM, a latchbolt strike monitor.
15) Is the HES 9100 strong enough for a high-traffic entrance?
It holds 1,500 lbs static, takes 70 ft-lbs of dynamic impact, and is tested to 1,000,000 cycles. It carries ANSI/BHMA A156.31 Grade 1, the top grade for electric strikes. On a main lobby door cycling all day, that cycle count is the number that matters most.
16) How much room does the HES 9100 take up at the header?
The strike measures 6 inches on the face plate, 1-7/8 inches wide, and 5/8 inch deep, with a 1-5/16 inch strike opening. That 5/8 inch depth is the number to check first, since a low-profile body is the whole point on a glass header where there is very little room behind the stop.
17) What is the difference between the HES 9100 and a no-cut strike like the Locknetics NC450 or the Camden low profile units?
All of them avoid frame machining, but they are aimed at different latches. The 9100 retro-mounts in an existing header prep for a tubular vertical rod exit device on a glass door, accepts 5/8 to 3/4 inch latchbolts, and is Grade 1 with fail safe/fail secure selectable in the field. The Locknetics NC450 is a no-cut strike, and Camden's CX-ED1689L-4 is a fire rated low profile universal strike shipped with four faceplates, which is the approach to take when you are covering several different existing preps across a building rather than one glass header.
18) The frame is hollow metal or wood, not aluminum. Does that rule out the HES 9100?
No. The HES 9100 is listed for aluminum, hollow metal, and wood frames, with a field adjustable shim to position the latch. If you want a jamb strike instead of the 9100's header retro-mount, the Adams Rite 7170 is an electric strike for hollow metal and wood jambs with a 1-1/4 x 4-7/8 inch faceplate, though it is not fire rated. The SDC 45F is a fire-rated strike for a 5/8 inch latchbolt with a radius corner faceplate, which matches a common hollow metal frame prep.
19) Is there an alternative to the HES 9100 for a pair of doors with a double door strike?
The HES 9100 is a single strike unit ordered in a left hand / right hand reverse or right hand / left hand reverse handing for a glass single door with vertical rods. For a pair, the Rockwood 310-1 double door electric strike with a 3/4 inch keeper is Grade 1 and fire rated and is built for the double door condition. If you stay with the 9100 on a pair, you are specifying handed units per leaf rather than one double door assembly.
20) Is there a simpler or lighter duty electric strike than the HES 9100 for an interior door that does not need a fire rating?
Yes, if the opening does not need the 9100's Grade 1 rating, UL 10C 3-hour fire rating, or its 1,500 lb static and 70 ft-lb dynamic strength. The Trine 001 Series is a fail-secure light commercial strike with a 5-7/8 x 1-1/4 inch faceplate and is not fire rated, and the RCI 15BS is an economy fail-secure strike for a special offset latch, also not fire rated. The SDC 15 Series is a value strike for a 5/8 inch latchbolt running 12/24 VDC, and the SDC 25 Series is a value strike for a 1/2 inch latchbolt. None of these carry a fire rating, so they suit openings outside a rated wall only.
21) I have an exterior gate. Is the HES 9100 the right strike, or is there a better option?
The HES 9100 is UL 1034 burglary-resistant listed and suitable for outdoor use, and it is rated for outdoor service, but it is a surface mounted header unit for glass doors with vertical rod exit devices, which is not a gate application. The Camden CX-ED1959 Series is an outdoor rated electric gate strike; it is not fire rated, which is generally not a requirement on an exterior gate. Match the strike to the gate latch and frame rather than to the 9100's header prep.
22) The HES 9100 handles a 5/8 to 3/4 inch latchbolt. What if my exit device has a 3/4 inch pullman latch on a rim device?
A 3/4 inch latch is within the 5/8 to 3/4 inch range the HES 9100 accommodates, but the 9100 is a surface mounted header unit for glass doors with tubular vertical rod exit devices. For a rim device, the SDC 30-4 Series is a rim mount electric strike for a 3/4 inch pullman latchbolt in stainless steel construction, and the Hager 2945 is a fire rated rim exit strike. The 9100 is likewise stainless steel, so the material spec matches; the difference is rim mounting versus header retro-mount.
23) I am standardizing electric strikes across a facility. Which options besides the HES 9100 are Grade 1?
The HES 9100 is ANSI/BHMA A156.31 Grade 1 with 1 million endurance cycles, 1,500 lb static strength, and UL 294 listing. Other Grade 1 strikes include the Alarm Controls AES-100 heavy duty strike, the Rockwood 310-1 double door strike with a 3/4 inch keeper, which is also fire rated, the Securitron MUNL mortise unlatch, and the Von Duprin 4211, 6210, and 6400, all Grade 1 heavy duty and fire rated. The Camden CX-ED1410 and CX-ED1420 are Grade 1 ANSI fire rated universal strikes. Standardizing on Grade 1 across a facility usually still means more than one model, because the strike has to match the lock hardware at each opening.
24) What is the difference between the HES 9100 and the Trine 2001 for a fire rated opening?
Both are fire rated. The Trine 2001 runs 16-24 VAC/DC, is fail secure, and has a 5-7/8 x 1-1/4 inch faceplate with up to a 5/8 inch throw. The HES 9100 runs 12 through 24 VDC, is field selectable fail safe or fail secure, has a 6 inch faceplate, and accommodates a 5/8 to 3/4 inch latchbolt with field adjustable shims and integrated latch position adjustment. The Trine is a jamb strike sized to a standard faceplate cutout; the 9100 surface mounts in an existing header prep with no cutting.
25) Will an HES 9100 strike be noisy on a quiet lobby or a hotel corridor?
Quiet operation is one of the 9100's stated design features, which is the reason it turns up on hotel and office lobby openings where a buzzing strike would be a complaint. If the requirement is truly silent release, that is a different technology than an electric strike altogether.
26) Can I match the HES 9100 to the bronze and brass hardware already on my other doors?
Seven finishes cover most existing hardware schedules: 605 bright brass, 606 satin brass, 612 satin bronze, 613E dark oxidized satin bronze equivalent, 629 bright stainless, 630 satin stainless, and BSP black suede powdercoat. 630 satin stainless is the one that matches most commercial exit device trim.
27) I need a strike in a finish other than satin stainless. Which options match the HES 9100 range?
The HES 9100 is offered in 605 bright brass, 606 satin brass, 612 satin bronze, 613E dark oxidized satin bronze, 629 bright stainless steel, 630 satin stainless steel, and BSP black suede powder. Several comparable strikes are supplied in a single stainless finish: the Locknetics CS450, MDS100, MS100, and NC450 are all US32D, and the Von Duprin 6400 is satin stainless steel. If the opening needs a brass, bronze, or black finish to match the rest of the door hardware, the 9100's finish range is the wider one.
How fast can I get the HES 9100R-630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HES 9100R-630 come with a warranty?
Absolutely. The HES 9100R-630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HES 9100R-630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the HES 9100R-630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!