HID 5350-113-04 Bezel, For ProxPro Reader, Beige

It's the bezel only, a replacement cover for the HID ProxPro reader in beige. There's no electronics, antenna, or wiring in it, so if you need a working reader you'd order the ProxPro itself and use this bezel only to replace a cracked, faded, or mismatched cover on a unit already installed.

Only the ProxPro. The 5350-113-04 is cut for that housing specifically, so it won't cover a ProxPoint, a mullion reader, or a keypad unit. Confirm the model marking on the reader you're replacing the cover on before ordering.

No - those are two different kinds of item. The HID 5350-113-04 is a beige bezel for the ProxPro reader, a trim component rather than the electronics. The SDC IPRW Series is a Wiegand proximity reader with 125KHz HID compatibility, meaning it is the credential-reading device itself. If your ProxPro is working and you only need to replace cracked or discolored trim, the 5350-113-04 bezel is the part; if the reader head itself is being replaced or a new opening is being equipped, a reader such as the IPRW Series is what fills that role.

That's exactly what this part is for. Swapping the beige 5350-113-04 bezel onto an existing HID ProxPro restores the appearance without touching the wiring, the credential database, or the panel connection. Nothing about the reader's configuration changes when you change the cover.

The HID 5350-113-04 is bezel trim only, so it does not replace reader electronics. For a full reader replacement at a 125KHz HID credential opening, the SDC IPRW Series is a Wiegand proximity reader listed as 125KHz HID compatible, which keeps existing HID prox cards in service on a Wiegand-wired panel input. Buyers standardizing a facility often order both: readers for the openings being changed out, and bezels like the 5350-113-04 for ProxPro units that stay in place and only need cosmetic trim renewed.

No. The 5350-113-04 is a commercial beige bezel for the ProxPro reader and carries no credential-reading electronics of its own, so it has to mount over a ProxPro that is already installed or ordered separately. A device that reads credentials on its own, such as the SDC IPRW Series Wiegand proximity reader with 125KHz HID compatibility, is a separate purchase. Confirm which half of the assembly you are short before ordering.

Yes. The ProxPro bezel is catalogued for commercial use as an electronic access control component, which is the environment ProxPro readers are installed in, entry doors, lobbies, and interior controlled openings in commercial and institutional buildings.

The 5350-113-04 is the beige version, and it's sold as a single model with no other option to choose. If your existing readers are a different color you'll want to match the part number to that finish rather than mixing beige into a run of doors.