You may also like
HID 900NTNNEK00000 Model R10 Reader, No 125 KHz support, Black, Wiegand Controller Communication
Manufacturer Resources
Product Specs
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Readers, Keypads and Credentials
- Product Type:
- Access Control Readers
- Subcategory:
- Credential Readers
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
HID 900NTNNEK00000 – Frequently Asked Questions
1) Does the HID R10 reader 900NTNNEK00000 read 125 kHz prox cards?
No. The 900NTNNEK00000 configuration of the R10 is built without 125 kHz support, so legacy 125 kHz proximity credentials will not read on it. If your site is still running 125 kHz cards and you are not converting them, this is the wrong part number to order.
2) What wiring does the HID R10 900NTNNEK00000 need back to the access control panel?
It communicates over Wiegand, so it lands on a standard Wiegand reader port at the controller. Plan for the usual shielded multiconductor reader cable home run to the panel rather than an OSDP or network drop.
3) Can I swap an existing Wiegand reader for the HID R10 without repulling cable?
If the reader you are replacing is already wired Wiegand back to the controller, the R10 900NTNNEK00000 uses that same Wiegand controller communication, so the existing home run and panel reader port carry over. The credentials are the catch, not the wiring: this build has no 125 kHz support, so any legacy prox cards on the old reader stop working.
4) I need a Wiegand reader that still reads our old 125 kHz prox cards - what should I use instead of the HID R10 900NTNNEK00000?
The R10 900NTNNEK00000 is built without 125 kHz support, so legacy prox credentials will not read on it. For an opening where the existing card population is still 125 kHz, the SDC IPRW Series is a Wiegand proximity reader with 125 kHz HID compatibility, which keeps the older credentials working on the same Wiegand wiring run. If your site is already migrated to newer smart credentials, the R10 is the one that matches that card base.
5) Is the HID R10 900NTNNEK00000 suitable for commercial building access control?
Yes, it is a commercial-duty credential reader for electronic access control openings, wired as a Wiegand reader to the door controller. It is the wall or mullion reader side of the system, not the lock or the controller, so you will still need the panel, power, and locking hardware to complete the opening.
6) Will an SDC IPRW reader drop onto the same controller wiring as an HID R10?
Both are Wiegand-output readers, so both terminate to a Wiegand reader port on the access control panel. The HID 900NTNNEK00000 R10 uses Wiegand controller communication, and the SDC IPRW Series is a Wiegand proximity reader. The practical difference is on the credential side rather than the panel side: the R10 is the no-125-kHz build, while the IPRW Series reads 125 kHz HID prox.
7) For a mixed-credential building where some doors still use old badges, how do I spec readers?
A common approach is to split by credential population. Doors serving users who still carry 125 kHz prox badges take a reader with that compatibility, such as the SDC IPRW Series Wiegand proximity reader. Doors cut over to the newer credential set take the HID R10 900NTNNEK00000, the black Wiegand build without 125 kHz support. Because both talk Wiegand back to the controller, the panel side of the design stays consistent across the facility while the reader head follows the badge.
8) What color is the HID R10 900NTNNEK00000, and will it match the rest of my readers?
Black. If you are standardizing a facility on one reader appearance, order this same part number across the openings so the faceplates match.
How fast can I get the HID 900NTNNEK00000 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HID 900NTNNEK00000 come with a warranty?
Absolutely. The HID 900NTNNEK00000 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HID 900NTNNEK00000?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the HID 900NTNNEK00000 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.