Hubbell Wiring HBL7464V Polari...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$28.90
Hubbell Wiring HBL7464V Polarized Connector Body, Twist-Lock® Valise®, 125V 15A NEMA ML-1P, Black

Hubbell Wiring HBL7464V Polarized Connector Body, Twist-Lock® Valise®, 125V 15A NEMA ML-1P, Black

(No reviews yet) Write a Review

Model: HBL7464V

In Stock (leaves warehouse same day if ordered before 3pm ET)

$28.90
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hubbell Wiring Polarized Connector Body, Twist-Lock® Valise®, 125V 15A NEMA ML-1P, Black

The Hubbell Wiring connector body is a 2-Wire, 2-Pole polarized design engineered for dependable, locking power connections in professional and portable electrical applications. Rated 125-Volt AC at 15-Amp and built to the NEMA ML-1P configuration, it pairs with matching Twist-Lock® devices to provide a secure, vibration-resistant connection that resists accidental disconnection under load. Part of Hubbell's Valise® connector line, this connector body is finished in black for durable, easy-to-identify performance wherever polarized, locking cord connections are required in commercial, industrial, or portable power setups.

Key Features

  • Electrical Rating: Rated 125-Volt AC at 15-Amp, suitable for portable cord sets and connector applications requiring dependable power transfer.
  • 2-Wire, 2-Pole Polarized Configuration: The polarized pin arrangement ensures correct orientation every time and prevents mismating with incompatible plugs or connectors.
  • NEMA ML-1P Configuration: Standardized NEMA locking configuration ensures compatibility with matching Twist-Lock® plugs for a consistent, code-recognized connection.
  • Twist-Lock® Locking Mechanism: A twist-and-lock engagement keeps the connector securely mated, reducing the risk of vibration-induced disconnects in demanding environments.
  • Valise® Series Connector Body: Hubbell's Valise® design delivers a rugged, repeatable connector body built for frequent connect/disconnect cycles in portable power applications.
  • Black Housing Finish: A durable black finish provides consistent appearance and simplifies visual identification within larger cord and cable assemblies.

Certifications & Compliance

  • NEMA ML-1P Locking Configuration
  • Polarized 2-Wire, 2-Pole Design for Correct Mating

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Portable Power Cord and Cable Assemblies
  • Temporary Power Distribution Setups
  • Industrial and Commercial Electrical Installations
  • Extension Cord and Connector Body Replacement
  • Entertainment, Stage, and Event Power Connections

Why Hubbell Wiring?

Hubbell Wiring is known for engineering locking electrical connectors that perform reliably in demanding environments. This connector body combines a Twist-Lock® Valise® design, a polarized 2-Wire, 2-Pole NEMA ML-1P configuration, and a 125-Volt AC, 15-Amp rating to deliver a connector body professionals can depend on for secure, consistent, and code-recognized portable power connections.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
HUG-20260922
Product Type:
Connector
Department:
Electrical
Product Subgroup:
Plugs & Connectors
Amperage Rating:
15A
Voltage Rating:
125V
Nema Rating:
ML-1R
Number Of Poles:
2-Pole
Number Of Wires:
2-Wire
Product Group:
Wiring Devices

Hubbell Wiring HBL7464V – Frequently Asked Questions

1) What plug does the Hubbell HBL7464V connector body mate with?
The HBL7464V is a NEMA ML-1P configuration Twist-Lock device, so it mates with matching ML-1 Twist-Lock plugs and devices of the same configuration. The pin arrangement is polarized 2-wire, 2-pole, which blocks mating with other NEMA configurations. If the cord set on the other end is a straight-blade 5-15 or a different locking pattern like L5-15, it will not engage.
2) Is the Hubbell HBL7464V a grounding connector?
No. It is a 2-wire, 2-pole polarized design, which means hot and neutral only, with no equipment grounding conductor. If your assembly or the tool being fed requires a ground path, you need a 3-wire grounding locking device instead, not this ML-1P body.
3) What voltage and amperage is the HBL7464V Twist-Lock connector rated for?
125 volts AC at 15 amps. That covers typical 120V branch-circuit cord sets and portable power assemblies; anything drawing more than 15 amps or running on 250V needs a higher-rated locking configuration.
4) Is a connector body like the HBL7464V the female end or the male end of a cord set?
A connector body is the female end, the one that accepts the plug. On a portable cord assembly the plug goes on the supply end and the connector body like the HBL7464V goes on the load end. If you need the male half, order the matching ML-1 Twist-Lock plug instead.
5) Why use a Twist-Lock connector instead of a standard straight-blade cord connector?
The twist-and-lock engagement on the HBL7464V holds the two halves mated mechanically, so vibration or a tug on the cord does not pull the connection apart under load. That is why these show up on stage and event power, temporary distribution, and industrial cord assemblies. For a fixed receptacle in an office wall, a straight-blade device is simpler and cheaper.
6) Can I use the HBL7464V to repair an existing locking extension cord?
Yes, that is one of its intended uses. The Valise line is built for field-wired cord and cable assemblies and frequent connect/disconnect cycles, so replacing a damaged connector body on an existing cord is standard practice. The replacement has to match the plug on the other cord: this one is ML-1P, 125V 15A, 2-wire non-grounding.
7) Can a liquidtight conduit connector like the Ocal ST34-G be used in place of the Hubbell HBL7464V connector body?
No - they do different jobs. The Hubbell HBL7464V is a polarized Twist-Lock Valise connector body rated 125V AC, 15A in the NEMA ML-1P configuration, wired onto the end of a portable cord so it can mate and lock to a matching Twist-Lock plug. The Ocal ST34-G is a PVC-coated steel non-grounding liquidtight straight connector in 3/4-inch trade size, used to terminate liquidtight flexible conduit into a box or enclosure. It carries no voltage or amperage rating and makes no cord-to-cord connection. If you are building or repairing a cord set, the HBL7464V is the part; if you are landing flex conduit at an enclosure, the conduit connector is.
8) What is the exact Hubbell part number for the black ML-1P Valise connector body?
HBL7464V. One model, black housing, 125V 15A, NEMA ML-1P, Twist-Lock Valise series. Order it by that number.
How fast can I get the Hubbell Wiring HBL7464V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hubbell Wiring HBL7464V come with a warranty?
Absolutely. The Hubbell Wiring HBL7464V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hubbell Wiring HBL7464V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hubbell Wiring HBL7464V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!