IDEAL Industries 30-S1212 SLK Disconnect Kit, In-Line Breakaway Set

It takes 2 through 14 AWG and is rated for both copper and aluminum conductors, so it works on the aluminum feeders common in street and parking lot lighting poles as well as copper fixture leads.

Yes. The SLK disconnect kit is Listed to UL 486D for submersibility, which is the listing that covers wire connectors used in wet or submerged locations such as handholes and pole bases that take on water.

Same in-line breakaway set-screw disconnect either way. The fused version, 30-S1212, carries a breakaway fuseholder that accepts a 13/32 x 1-1/2 midget fuse for overcurrent protection at the luminaire. The 30-S1212N is non-fused and acts purely as a disconnecting means. Spec a fused unit where the pole circuit needs individual fixture protection; the unfused one where protection is already handled upstream.

30A at 600V, with a 105 degree C temperature rating. That covers standard 120V through 480V roadway and area lighting circuits, and the 105 C rating suits it to fixture wiring in a hot pole base or ballast compartment.

Set screw means the conductors land under screw terminations inside the disconnect body, so you can make the connection with a screwdriver and no crimp tool on the pole. IDEAL also builds SLK disconnects with crimp terminations if your spec calls for a crimped barrel instead.

The bright orange body is for visibility down in a dark pole base or handhole, so a maintenance crew can find the disconnect fast. It's built for roadway, street, parking lot and area lighting, installed in-line between the pole feeder and the luminaire so the fixture can be isolated without pulling the circuit.