IDEAL Industries Vinyl Insulat...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$0.48
IDEAL Industries Vinyl Insulated Spade Terminal

IDEAL Industries Vinyl Insulated Spade Terminal

(No reviews yet) Write a Review

Model: 84-7161

In Stock (leaves warehouse same day if ordered before 3pm ET)

$0.48
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Vinyl Insulated Spade Terminal, 16-14 AWG, #8 Stud, Box of 1,000

  • Features

    • Shouldered barrel insulation quickly positions terminal for proper crimping
    • Butted seam-construction prevents splitting under maximum pressure
    • Expanded insulation entry accommodates a wide variety of insulation diameters and provides additional insulation support
    • Internal barrel serrations grip wires tightly to resist pull-out and reduce electrical resistance
    • Tin-plated brass construction for corrosion resistance


84-7161 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Product Subgroup:
Lugs & Terminals
Department:
Electrical
Product Group:
Wire Connectors & Terminals
Product Type:
Fork Terminal

Ideal Industries 84-7161 – Frequently Asked Questions

1) What wire sizes do the IDEAL vinyl insulated spade terminals accept?
Both the 84-7161 and 84-7171 spade terminals are built for 16-14 AWG stranded or solid wire. If you're terminating 22-18 or 12-10 AWG, these are the wrong barrel size and the crimp will not hold.
2) Which spade terminal do I need for a #10 screw versus a #8 screw?
Stud size is the only difference between the two. Order 84-7161 for a #8 stud and 84-7171 for a #10 stud. Both take 16-14 AWG wire. Putting a #8 fork on a #10 screw means the tongue won't slip over the threads, so match it to the terminal block or ground screw you're landing on.
3) Should I use a spade terminal or a ring terminal for a control panel terminal strip?
A spade (fork) terminal like the IDEAL 84-7161 slides in under a loosened screw head without removing it, which is why it is the usual choice on terminal strips and panel blocks where you service connections often. A ring terminal has to come off the screw entirely but cannot vibrate out, so it is the better pick for motor leads, battery studs, and anything subject to vibration or where code or spec calls for a captive connection.
4) Will these terminals hold on wire with thick insulation?
Yes. The insulation entry on these IDEAL spade terminals is expanded to take a range of insulation diameters and support the jacket behind the crimp, so oversized-jacket 16-14 AWG hook-up and machine tool wire still seats. The shouldered barrel insulation also stops the terminal at the right depth in the crimp tool jaw.
5) Will the barrel split if I over-crimp these spade terminals?
The barrel uses butted seam construction specifically to resist splitting under maximum crimp pressure, and internal serrations bite the strands to resist pull-out and lower resistance at the joint. Use a 16-14 AWG insulated-terminal crimper (the red die on most tools) rather than pliers to get the rated hold.
6) Are these spade terminals suitable for outdoor or damp locations?
The barrel is tin-plated brass, which resists corrosion, and the vinyl insulation covers the crimp. That holds up in damp and industrial air. For direct water exposure or burial you still want the connection inside an enclosure or a heat-shrink style terminal instead, since vinyl insulation is not a moisture seal.
7) How are the IDEAL 84-7161 spade terminals packaged?
They ship in boxes of 1,000, which is the bulk pack for panel shops and MRO stockrooms doing repeat terminations rather than a one-off repair.
How fast can I get the Ideal Industries 84-7161 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries 84-7161 come with a warranty?
Absolutely. The Ideal Industries 84-7161 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries 84-7161?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries 84-7161 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!