Square D TeSys Deca 60A IEC Co...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5.48
Square D TeSys Deca 60A IEC Contactor, 4-Pole 4NO, 115VAC Coil

Square D TeSys Deca 60A IEC Contactor, 4-Pole 4NO, 115VAC Coil

(No reviews yet) Write a Review

Model: LC1DT60AFE7

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5.48
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Square D TeSys Deca 60A IEC Contactor, 4-Pole 4NO, 115VAC Coil

The Square D TeSys Deca IEC contactor is a 4-pole (4NO) switching device built for non-inductive, resistive-load applications up to 60A at 440V AC-1, making it suitable for motor starters and general power switching across almost any industrial or commercial application. It features a 115V AC 50/60Hz control coil and is rated for a maximum operational voltage of 690V AC on the power circuit. Backed by IEC 60947-4-1, EN 60947-4-1, and UL 60947-4-1 compliance, this contactor delivers dependable, code-recognized performance for panel builders, OEMs, and contractors.

Key Features

  • Rated Operational Current: 60A (at <60 °C) at <= 440V AC AC-1 for the power circuit, ideal for resistive load switching.
  • Pole Configuration: 4 poles with 4 NO (normally open) contact composition for flexible circuit control.
  • Control Circuit Coil: 115V AC 50/60Hz coil voltage for standard control-panel integration.
  • Rated Operational Voltage: Power circuit rated <= 690V AC 25...400Hz and <= 300V DC.
  • Insulation Voltage: Ui 600V (UL/CSA) on the power circuit and 690V (IEC 60947-1) on the signalling circuit.
  • Impulse Withstand Voltage: Uimp rated at 6kV per IEC 60947.
  • Degree of Protection: IP20 on the front face conforming to IEC 60529.
  • Mounting Support: Compatible with rail or plate mounting for versatile panel installation.

Certifications & Compliance

  • Conforming to IEC 60947-4-1, EN 60947-4-1, and UL 60947-4-1
  • Conforming to IEC 60947-5-1 and EN 60947-5-1
  • CSA C22.2 No 14 compliant
  • Listed among UL, CSA, BV, GOST, GL, CCC, RINA, LROS, and DNV product certifications
  • ROHS EUR compliant status

Technical Specifications

  • Poles Description: 4P
  • Warranty: 18 months
  • Coil Technology: without built-in suppressor module
  • Contactor Application: resistive load
  • Compatibility Code: LC1D
  • Overvoltage Category: III
  • Operating Altitude: 0...9842.52 ft (0...3000 m)
  • Toxic Heavy Metal Free: Yes
  • Mercury Free: Yes
  • ROHS Eur In Scope: Yes
  • Sustainable Packaging: Yes
  • With Recycled Cardboard: Yes
  • Recycled Metal Content At Cr Level: 0 %
  • Packaging Without Single Use Plastic: Yes
  • China ROHS In Scope: No

Typical Applications

  • Motor Starter Assemblies
  • Industrial Control Panels
  • Commercial Power Switching Circuits
  • Resistive Load Switching
  • OEM and Panel Builder Equipment

Why Square D?

Square D's TeSys Deca contactors combine rugged IEC-rated construction with broad global certification (UL, CSA, and multiple international marine/industrial listings), giving panel builders and contractors confidence in code-compliant, reliable motor control. With a proven 6 Mcycles mechanical durability and a 115V AC coil built for standard control circuits, this contactor is engineered for dependable long-term service in demanding industrial and commercial environments.

Manufacturer Resources

Product Specs

Product Type:
Contactor
Series:
TeSys Deca
Amperage Rating:
60A
Voltage Rating:
115VAC
Configuration:
4 Pole
Listing:
UL Listed
Standards:
IEC 60947-4-1
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Contactors & Relays

Square D LC1DT60AFE7 – Frequently Asked Questions

1) Can the Square D LC1DT60AFE7 contactor be used to switch a motor, or is it resistive-load only?
The LC1DT60AFE7 is a 4-pole TeSys Deca contactor rated 60A at up to 440V in AC-1, which is the non-inductive, resistive-load duty category. Its stated contactor application is resistive load. It is used in motor starter assemblies and general power switching, but the 60A figure is an AC-1 rating, not an AC-3 motor rating, so do not size a motor load off that number. For inductive motor switching, select a contactor with a published AC-3 horsepower or kW rating at your motor voltage.
2) What coil voltage does the Square D LC1DT60AFE7 take, and will it work on a 60Hz control circuit?
The coil is 115V AC, rated 50/60Hz, so it drops straight into a standard 120V-class control circuit at 60Hz. The coil has no built-in suppressor module, so if you are driving it from a PLC output or solid state relay, plan on adding an external RC or varistor suppressor to protect the driving device.
3) What is the maximum system voltage I can run through the Square D TeSys Deca LC1DT60AFE7?
The power circuit is rated to 690V AC at 25 to 400Hz and 300V DC maximum operational voltage, with insulation voltage Ui of 600V to UL/CSA and 690V to IEC 60947-1. The 60A current rating applies at up to 440V in AC-1 duty at under 60 degrees C ambient. In North America the 600V UL insulation figure is the number your panel listing will be held to, so a 480V or 600V system is within scope.
4) I need to replace an existing LC1D-series contactor. Is LC1DT60AFE7 a direct swap?
It falls under the LC1D compatibility code, the TeSys Deca family. For a one-for-one replacement, match three things on the unit coming out: pole count and contact arrangement (this one is 4-pole, 4NO), the current rating (60A AC-1), and the coil voltage (115V AC 50/60Hz). A different coil suffix or a 3-pole body is not an electrical equivalent even though it is the same series.
5) Is a 4-pole contactor like this the right choice for a 3-phase load with a switched neutral?
A 4-pole, 4 NO device gives you four normally open power poles, so it will break three phases plus a neutral or a fourth conductor, or switch a 4-wire resistive bank such as heater elements. All four poles are the same type (4NO), so none of them is a dedicated auxiliary contact. If you need an auxiliary NO/NC for interlocking or a seal-in circuit, that has to be added as a separate auxiliary contact block.
6) How does this contactor mount in a control panel, DIN rail or back panel?
Both. The TeSys Deca 60A contactor supports rail or plate mounting, so it can clip to DIN rail or be screwed directly to a back panel where rail space is tight or vibration is a concern.
7) Is this contactor rated for an enclosure, or does it need one?
The front face is IP20 to IEC 60529, which is finger-safe against solid objects but offers no water protection. It is a panel-interior device and needs a suitable enclosure for any wet, dusty or outdoor location.
8) Will this Square D contactor hold up at high altitude or in a hot panel?
Rated for operating altitudes of 0 to 3000 m (0 to 9842.52 ft) and overvoltage category III, with a 6kV Uimp impulse withstand per IEC 60947. Mechanical durability is stated at 6 million cycles. Note the 60A current rating is specified at under 60 degrees C, so a hot, poorly ventilated enclosure means you should derate.
9) Does this contactor meet RoHS and green-procurement requirements?
The TeSys Deca 60A 4-pole contactor is RoHS EUR compliant and in scope, free of toxic heavy metals and mercury. Packaging is listed as sustainable, with recycled cardboard and no single-use plastic. China RoHS is noted as not in scope. Useful detail if you are documenting materials for an institutional or LEED-tracked project.
How fast can I get the Square D LC1DT60AFE7 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Square D LC1DT60AFE7 come with a warranty?
Absolutely. The Square D LC1DT60AFE7 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Square D LC1DT60AFE7?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Square D LC1DT60AFE7 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!