INS NYL AIRCRAFT SPLICE 12-10 AWG
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- Insulated Nylon
- Product Subgroup:
- Splices
- Product Type:
- Nylon Insulated Aircraft Splice
- Standards:
- UL E9809
- Temperature Range:
- 105 °C
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Yellow
- Product Material:
- Copper
Sta-Kon 2RCC – Frequently Asked Questions
1) What wire sizes does the Sta-Kon 2RCC splice accept?
The Sta-Kon 2RCC butt splice is sized for 12-10 AWG stranded copper conductors. The yellow nylon insulation is the standard color code for that range, so on a panel or harness you can tell at a glance which splices are 12-10 and which are the smaller sizes. For 16-14 AWG or 22-18 AWG runs you need a different splice size, not this one.
2) Is this splice rated for 600 volt circuits?
Yes. The 2RCC nylon insulated splice carries a 600 V rating, which covers normal branch circuit and control wiring work in commercial buildings. It is UL recognized under file E9809.
3) Can a nylon insulated butt splice like the Sta-Kon 2RCC be used in a hot location such as a luminaire or motor junction box?
Rated to 105 degrees C, the 2RCC handles the elevated temperatures found in ballast compartments, motor terminal boxes and other warm enclosures. If your conductors are rated below 105 C, the wire insulation becomes the limit, not the splice.
4) Nylon or vinyl insulated splice - which should I use?
The 2RCC is nylon insulated. Nylon is tougher than vinyl against abrasion and crushing when the splice gets pulled through a conduit or packed into a crowded box, and it takes the 105 degree C rating. Vinyl barrels are generally lower temperature and cut more easily. For harness work or anywhere the splice gets handled after crimping, nylon is the better pick.
5) Is the barrel on the Sta-Kon 2RCC splice copper or aluminum?
Copper. The 2RCC uses a copper barrel under the nylon sleeve, so it is intended for copper conductors. Do not use it to terminate aluminum wire; aluminum needs a connector specifically listed AL/CU.
6) What crimp tool do I need for a 12-10 AWG insulated butt splice?
A 2RCC splice is crimped with an insulated-terminal crimper set for the 12-10 AWG yellow die position. No tool is supplied with the splices themselves, so the tool is a separate line on the order. Crimp both ends of the barrel, one per conductor, and tug-test each after crimping.
7) Is the Sta-Kon 2RCC made in the USA?
Yes, the 2RCC splice is manufactured in the United States, which matters if you are buying against a Buy American or domestic-preference requirement on a government or institutional job.
8) What is the exact part number to order for the Sta-Kon 12-10 AWG aircraft splice?
Order Sta-Kon part number 2RCC. It is a single-model item, so there are no finish or size suffixes to specify beyond that number.
How fast can I get the Sta-Kon 2RCC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon 2RCC come with a warranty?
Absolutely. The Sta-Kon 2RCC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon 2RCC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon 2RCC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.