You may also like
ins nyl ring 22-16 1/4 red mylar LH
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Nylon Insulated Ring Terminal
- Wire Size:
- 22-16 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Red
- Product Material:
- Copper
Sta-Kon RA713ML – Frequently Asked Questions
1) What wire gauge does the Sta-Kon RA713ML ring terminal take?
The RA713ML is sized for 22-16 AWG stranded copper conductors. Red insulation is the standard color code for that range, so if you are crimping 14 or 12 AWG you need a different terminal (blue for 16-14, yellow for 12-10).
2) Should I use a ring terminal or a fork terminal on a panel or terminal block?
A ring terminal like the RA713ML cannot back off a loose screw, so it is what most commercial and institutional specs call for on motor connections, panelboards, and anything that vibrates. A fork or spade slides in under a partly backed-out screw, which makes service faster but lets the wire escape if the screw loosens. If the terminal is hard to reach and gets serviced often, a fork is the practical choice; for a permanent connection, use the ring.
3) Is the barrel on the Sta-Kon RA713ML copper or aluminum?
Copper barrel with nylon insulation. That means it is for copper conductors only, not aluminum feeders, which need an AL-rated dual-listed connector.
4) What does the LH mylar designation on the RA713ML mean for how it is packaged and applied?
LH mylar refers to the mylar-carrier strip feed for machine application, with the terminals oriented for a left-hand tool. If you are crimping by hand one at a time, loose-piece terminals are simpler; the strip form matters when you are running a bench or production applicator.
5) Do nylon insulated terminals hold up better than vinyl ones?
Nylon insulation, as used on the RA713ML, takes more abuse than vinyl: it resists cut-through and abrasion when wires are pulled through a raceway or bundled tight, and it holds shape at higher temperatures. It is the usual pick for MRO and industrial panel work where vinyl would split at the barrel.
6) Is the Sta-Kon RA713ML made in the USA?
Yes, country of origin is the United States. That matters if you are buying against a Buy American or domestic-preference clause on a government or institutional job.
How fast can I get the Sta-Kon RA713ML delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RA713ML come with a warranty?
Absolutely. The Sta-Kon RA713ML is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RA713ML?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RA713ML from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.