You may also like
INS NYL RNG TRM 12-10 1/4 YEL MYLAR
Manufacturer Resources
Product Specs
- Application:
- Wiring terminations or connections for applications such as wiring harness, panelboard, telecommunications, and automotive.
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Nylon Insulated Ring Terminal
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Wire Size:
- 12-10 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Yellow
- Product Material:
- Copper
Sta-Kon RC713M – Frequently Asked Questions
1) What wire gauge does the Sta-Kon RC713M ring terminal accept?
The RC713M takes 12 to 10 AWG conductor. That is the yellow color code on nylon insulated terminals, so if the barrel you are replacing is yellow you are in the right range. Running 14 or 16 AWG into it will not crimp reliably, and anything heavier than 10 AWG will not seat in the barrel.
2) Can I use these nylon insulated ring terminals on 480 volt panel wiring?
The RC713M carries a 600 V rating, so it covers 120/208, 277/480 and other common commercial branch and feeder control circuits up to 600 volts.
3) Is the Sta-Kon RC713M UL listed?
It carries UL file E9809. That is the record a facilities or institutional inspector will want cited for terminations in a panelboard or control enclosure.
4) Are these ring terminals copper or aluminum?
Copper barrel with a nylon insulating sleeve. Use them on copper conductor; they are not rated as AL/CU dual-rated connectors, so aluminum conductor needs a connector specifically marked for it.
5) Why choose a nylon insulated ring terminal over a vinyl one?
Nylon insulation takes more abuse than vinyl: it resists abrasion and cut-through when wires are pulled through a harness or bundled tight in a panel, and it flexes without splitting. The RC713M is the nylon version in yellow for 12-10 AWG. Vinyl barrels are the lower-cost choice for static, low-stress terminations indoors.
6) Are Sta-Kon ring terminals made in the USA?
Country of origin on the RC713M is the United States, which matters if you are buying against a domestic-preference or Buy American clause on a government or institutional job.
7) Do I need a special crimper for the Sta-Kon RC713M?
Crimp it with a tool sized for the yellow 12-10 AWG insulated terminal nest. Pliers or an undersized die will give you a joint that passes a visual check and fails a pull test. The RC713M is a crimp-only terminal, no solder required.
How fast can I get the Sta-Kon RC713M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RC713M come with a warranty?
Absolutely. The Sta-Kon RC713M is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RC713M?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RC713M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.