You may also like
INSUL SERVICE SLEEVE 2ASCR 5/8IN
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- Yes
- Number Of Conductors:
- 2
- Product Group:
- Wire Connectors & Terminals
- Product Type:
- Compression Splice
- Selling Unit Of Measure:
- each
- Standards:
- RUS Accepted. Complies with ANSI C119.4 when properly installed on Aluminum-to-Aluminum or Aluminum-to-Copper Conductors.
- Type2:
- Wire or cable compression splice
- Department:
- Electrical
- Product Subgroup:
- Wire Connectors
- Product Size:
- 2-25/32 inch
- Installation Category:
- None
Blackburn ICS69-1 – Frequently Asked Questions
1) Can the Blackburn ICS69-1 service sleeve be used to splice aluminum to copper conductors?
Yes. The ICS69-1 complies with ANSI C119.4 when properly installed on aluminum-to-aluminum or aluminum-to-copper conductors, so it handles mixed-metal service entrance splices as well as all-aluminum runs. It is also RUS accepted, which matters on rural electric utility work.
2) How many conductors does the Blackburn ICS69-1 insulated sleeve splice?
Two. The ICS69-1 is a two-conductor compression sleeve, so it joins one run to one run, not a multi-tap. If you need to bring three or more conductors together you need a different connector body.
3) Does the ICS69-1 need to be taped after crimping, or is it already insulated?
It comes insulated. The ICS69-1 is an insulated service sleeve, so the cover is part of the connector rather than something you add with tape or heat shrink after the crimp.
4) Is the Blackburn ICS69-1 a crimp connector or a set screw connector?
Crimp. It is a compression splice, so it is installed with a die-type compression tool, not tightened with a hex key. Plan on having the matching crimp tool on the truck before you pull the old splice apart.
5) How long is the Blackburn ICS69-1 sleeve, and will it fit in a tight meter socket or weatherhead?
The ICS69-1 measures 2-25/32 inches, which is the figure to work from when you are checking clearance inside a meter socket, gutter, or behind a weatherhead. Add room for the tool jaws either side of the barrel when you lay out the splice.
6) Is the Blackburn ICS69-1 sold individually or in a bag?
Each. The ICS69-1 is sold as a single sleeve, so order one per splice point rather than by the box.
7) What is the manufacturer part number for the Blackburn insulated 5/8 inch service sleeve?
ICS69-1 is the Blackburn part number for the insulated two-conductor service entrance sleeve. It is manufactured in Mexico.
How fast can I get the Blackburn ICS69-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn ICS69-1 come with a warranty?
Absolutely. The Blackburn ICS69-1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn ICS69-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn ICS69-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.