You may also like
Klein Tools 601-7-INS Insulated Screwdriver, 3/16-Inch Cabinet, 7-Inch
Model: KLN-601-7-INS
Insulated Screwdriver, 3/16-Inch Cabinet, 7-Inch
Warnings
Do NOT use to pry or chisel.
Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated...
Klein Tools
$82.70
$32.70
Klein Tools 602-7-INS Insulated Screwdriver, 5/16-Inch Cabinet, 7-Inch
Model: KLN-602-7-INS
Insulated Screwdriver, 5/16-Inch Cabinet, 7-Inch
Features
Flame Retardant and Impact Resistant Handle
Custom US-made tool steel
Cushion-Grip™ handle for superior torque and comfort
This replaces Cat...
Klein Tools
$87.31
$37.31
Klein Tools 602-4-INS 1/4-Inch Cabinet Tip Insulated Screwdriver, 4-Inch
Model: KLN-602-4-INS
1/4-Inch Cabinet Tip Insulated Screwdriver, 4-Inch
Features
1000V rated for safety
Cushion-Grip™ handle for superior torque and comfort
Flame Retardant and Impact Resistant Handle
Custom US-made...
Klein Tools
$84.07
$34.07
Klein Tools 662-7-INS #2 Insulated Screwdriver with 7-Inch Shank
Model: KLN-662-7-INS
#2 Insulated Screwdriver with 7-Inch Shank
Warnings
Wear approved eye protection.
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Whenever possible,...
Klein Tools
$82.44
$32.44
Klein Tools 661-7-INS Insulated Screwdriver, #1 Square with 7-Inch Shank
Model: KLN-661-7-INS
Insulated Screwdriver, #1 Square with 7-Inch Shank
Warnings
Wear approved eye protection.
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized...
Klein Tools
$82.44
$32.44
Insulated 1/4-Inch Cabinet Tip Screwdriver, 7-Inch
605-7-INS - spec sheet
Features
- Cushion-Grip™ handle for superior torque and comfort
- Made in the USA
- Custom US-made tool steel
- Flame Retardant and Impact Resistant Handle
- Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools
- 1000V Rated for safety
Warnings
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Wear approved eye protection.
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Because moisture, films and other surface contaminants are conductive, Klein insulated tools must be kept clean, dry and free of any surface contamination.
- Do NOT use to pry or chisel.
605-7-INS - spec sheet
Manufacturer Resources
Product Specs
- Handle Material:
- High-Dielectric Plastic
- Insulated:
- Yes
- Item Depth:
- 11.3130 in
- Item Height:
- 1.0000 in
- Item Weight:
- 0.2500 lbs
- Item Width:
- 1.0000 in
- Magnetic:
- No
- Material:
- Induction Hardened Steel
- Overall Length:
- 11.313" (28.7 cm)
- Shank Length:
- 7" (17.8 cm)
- Shank Type:
- Round
- Standard:
- IEC 60900 and ASTM F1505
- Tip Size:
- 1/4" (6.4 mm)
- Tip Type:
- Cabinet
- Weight:
- 4.0 oz (113 g)