You may also like
Ives FS455A Kick Down Door Holder 4" Satin Aluminum Heavy Duty
Model: IVE-FS455A
Ives FS455A Kick Down Door Holder 4" Satin Aluminum Heavy DutyProfessional Foot-Activated Door Control SolutionThe Ives FS455A kick down door holder provides simple hold and release operation...
Ives
Starting at
$12.70
$5.96
Delaney 6000 Series Medium to Heavy Duty Door Closer, Grade 1
Model: DLY-60671x
Delaney 6000 Series Medium to Heavy Duty Door CloserSpecifications:• ANSI 156.4 Grade 1• UL / UL10C listed, 3-hour fre rating• Compliant with ADA reduced opening force requirements• Same mounting...
Delaney Hardware
Starting at
$152.00
$116.60
DH-6000 – Door Holder Features
-
Durable Zinc Alloy Construction
-
Non-Marking Rubber Tip – Protects surfaces while providing secure grip
-
7” Overall Height – Compact yet effective design
-
Includes Mounting Hardware:
-
(2) #10 x 1-1/2” Flat Head Wood/Sheet Metal Screws
-
(1) #10 x 1/2” Flat Head Wood/Sheet Metal Screw
-
(2) #10 x 1-1/2” Self-Drilling / Self-Tapping Screws
-
(1) #10 x 1/2” Self-Drilling / Self-Tapping Screw
-
-
Lightweight – Total weight: 1 lb
-
Available Finishes:
-
AL – Aluminum
-
DU – Storefront Bronze
-
Manufacturer Resources
Product Specs
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Stops, Holders, Silencers & Bumpers
- Product Type:
- Door Holders
- Product Model:
- IDCDH-6000
- Department:
- Door Hardware
International Door Closers IDCDH-6000AL – Frequently Asked Questions
1) What mounting screws come with the IDCDH-6000 kick down door holder?
Mounting hardware is in the box, and it covers both wood and metal doors. You get two #10 x 1-1/2 inch flat head wood/sheet metal screws plus one #10 x 1/2 inch flat head, and two #10 x 1-1/2 inch self-drilling/self-tapping screws plus one #10 x 1/2 inch self-drilling. The self-drillers are what you use on a hollow metal or aluminum door; the wood screws handle a solid wood door or stile.
2) How tall is the International Door Closers DH-6000 kick down holder, and how much room does it need above the floor?
Overall height is 7 inches. That is the dimension to check against your undercut: the holder mounts on the face of the door near the bottom and the rubber tip swings down to the floor, so you need roughly that much clear door face below the mounting point with nothing in the way, like a bottom rail sweep or a door shoe.
3) Will a kick down holder mark or scratch my floor?
The DH-6000 uses a non-marking rubber tip, so it grips the floor without leaving black streaks the way a bare metal foot would. That is the reason property managers put these on units with VCT, sealed concrete, or finished wood in corridors and lobbies.
4) Should I use a kick down door holder or a wall-mounted door stop with a hold-open?
A kick down holder like the DH-6000 mounts on the door itself and drops a rubber foot to the floor, so it holds the door at any angle you kick it down at, and it works where there is no wall behind the door to catch a stop. A wall stop with a hold-open only holds at one fixed opening angle and needs solid blocking in the wall. If the door swings into open space, a corridor, or a glass front vestibule, the kick down is the one that works.
5) What finishes does the IDCDH-6000 come in, and which matches an aluminum storefront?
Two finishes: anodized aluminum (AL) and dark bronze (DU), which the manufacturer calls storefront bronze. Match AL to clear anodized aluminum entrances and DU to dark bronze storefront. Both are the standard architectural tones you find on commercial glass fronts, so a glass front installer can spec straight off the frame color.
6) Is the kick down holder handed, or does one part work on both left and right hand doors?
It is not handed. A kick down holder mounts on the face of the door and pivots straight down to the floor, so the same DH-6000 works on a left hand or right hand door, in-swing or out-swing. You only need to decide which face of the door to mount it on, which is the side the door swings toward.
7) Is this door holder strong enough for a high-traffic commercial entrance?
It is built as a heavy duty holder in zinc alloy rather than stamped steel or plastic, which is what keeps the kick arm from bending after repeated kicks. For apartment corridors, school entries, loading doors, and storefront entrances that get held open daily, that is the construction you want.
8) Can I standardize the DH-6000 across a whole building on both wood and metal doors?
Yes, and that is the practical reason to buy it by the case. Because each holder ships with both wood screws and self-drilling screws, one part number covers hollow metal stairwell doors, solid core unit doors, and aluminum storefront leaves. Pick one of the two finishes to keep the building consistent and you are ordering a single SKU for every opening.
How fast can I get the International Door Closers IDCDH-6000AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the International Door Closers IDCDH-6000AL come with a warranty?
Absolutely. The International Door Closers IDCDH-6000AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the International Door Closers IDCDH-6000AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the International Door Closers IDCDH-6000AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.