You may also like
Dorma BTS75VD Concealed Floor Door Closer, 3/4" Offset Mount
Model: DOR-BTS75VD
DORMA BTS75V Series door closer
Floor-Concealed Door Closer
The BTS75V Series of floor-concealed door closers offer adaptability to almost any installation. The closer's compact body permits its...
Dormakaba
Starting at
$2,404.00
$1,349.02
Dorma BTS80D Concealed Floor Door Closer, 3/4" Offset Mounting
Model: BTS-80D
OVERVIEW The BTS80 Series of floor-concealed door closers offer adaptability to almost any installation. The closer's compact body permits its use where a larger closer would be prohibitive...
Dormakaba
Starting at
$2,366.00
$1,309.11
International Door Closers IDC44CI Surface Mount Closer
Model: IDCDH-44CI
Surface Mount Door Closer – Overview
Designed for durability and versatility, this surface-mounted closer is ideal for high-traffic doors and demanding environments. Built with premium materials, it...
International Door Closers
$220.26
Calibre Door Closers UH1200 4"-12" CTC Universal Multi-Sized Offset Pull Handle
Model: CDCUH1200
Calibre Door Closers UH1200 4"-12" CTC Universal Multi-Sized Offset Pull Handle
Features:
Standard 12" CTC Offset Pull Handle with Press Fitting End Brackets.
On site adjustment to match any...
Calibre Door Closers
$113.30
$93.93
International Door Closers IDCDL4510 Lever Handle for DL4510
Model: IDCDL4510
Lever Handle for DL4510
Designed for use with DL-4510 series latch locks.
Includes a field-reversible cam plug for flexible installation.Note: Please specify handing if factory pre-handing is...
International Door Closers
Starting at
$18.18
International Door Closers PH-4000 Offset Pull Handle, T6 Concealed Mount
Manufacturer Resources
Product Specs
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Parts And Accessories
- Product Type:
- Pull Handle
- Subcategory:
- Parts And Accessories
- Product Model:
- PH-4000
- Product Category:
- Door Trim and Accessories
- Department:
- Door Hardware
International Door Closers PH-4000-9-DU-T6 – Frequently Asked Questions
1) What center-to-center spacing does the International Door Closers PH-4000 pull handle come in?
Two hole spacings: 9 inch and 10 inch center-to-center. That measurement is the distance between the two mounting points, so it has to match the holes already drilled in the door or the prep on your shop drawing. If you are replacing an existing offset pull, measure hole center to hole center before picking between the two.
2) What finishes is the PH-4000 offset pull handle available in?
Aluminum (AL) and Storefront Bronze (DU). Both are offered in each center-to-center size, 9 inch and 10 inch, so you can match either spacing to the anodized finish already running on the rest of the storefront. Storefront Bronze is the one to pick against dark bronze anodized aluminum framing; AL matches clear anodized.
3) What does T6 concealed mount mean on this pull handle?
Concealed mount means the fasteners do not show on the face of the pull. The PH-4000 mounts through the door with the hardware hidden, so the exposed side is a clean offset pull with no visible screw heads. T6 is the aluminum temper designation on the handle itself. Practically, it means you need through-holes in the door leaf at the stated 9 or 10 inch spacing, not a surface-applied screw pattern.
4) Is the PH-4000 a pull only, or does it include a latch or lock?
Pull only. The PH-4000 is a door pull handle, no latching or locking mechanism in it. Whatever secures the opening, a deadlatch, a mortise lock, or a panic device, gets ordered separately. On a glass storefront door people typically pair a pull like this with a push bar or a deadlatch on the opposite leaf.
5) Is an offset pull handle the right choice, or should I use a straight pull?
An offset pull stands the grip away from the door face on brackets at each end, which gives you clearance for a gloved hand and keeps knuckles off the stile. That is the usual choice on aluminum storefront and glass entrance doors where the pull sits on a narrow stile. A straight or back-to-back pull mounts flush to the face and reads cleaner but gives less hand room. The PH-4000 is the offset style, in 9 inch and 10 inch center-to-center.
6) Can I order the PH-4000 in bronze with the 10 inch spacing?
Yes. Both center-to-center sizes are built in both finishes: 10 inch in Aluminum and in Storefront Bronze, and 9 inch in the same two. So the spacing decision and the finish decision are independent, which matters when you are matching hole prep on existing doors but need the finish to follow a newer storefront.
How fast can I get the International Door Closers PH-4000-9-DU-T6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the International Door Closers PH-4000-9-DU-T6 come with a warranty?
Absolutely. The International Door Closers PH-4000-9-DU-T6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the International Door Closers PH-4000-9-DU-T6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the International Door Closers PH-4000-9-DU-T6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.