Name: Ives 8320 Plymouth Curved Door Pull with 20" Center-to-Center Mounting
Brand: Ives
SKU: 8320 20 626
Price: 729.32 USD
Availability: InStock

Product Overview
FAQs

Ives Plymouth Curved Door Pull with 20" Center-to-Center Mounting

Professional Offset Solid Door Pull for Commercial Applications

The Ives Plymouth Curved Door Pull features an elegant offset design with 20" center-to-center mounting and 1-1/4" maximum grip diameter. This heavy-duty commercial door pull meets ANSI A156.06 standards and is available with brass or stainless steel substrate options depending on finish selection. The decorative pull coordinates with Schlage and Von Duprin lever and knob designs for unified building aesthetics.

Professional Features & Benefits

Offset Design Dimensions: 20" center-to-center mounting with 1-1/4" maximum grip diameter for comfortable operation and professional appearance.
Heavy-Duty Construction: Solid door pull construction with heavy-duty mounting hardware standard for demanding commercial applications.
ANSI Compliance: Meets ANSI A156.06 standards for commercial door hardware performance and reliability.
Substrate Options: Available with brass substrate for most finishes or stainless steel substrate for finishes 630 and 631.
Design Coordination: Coordinates with Schlage and Von Duprin lever and knob designs for unified building hardware aesthetics.
Versatile Mounting Options: Standard thru-bolt installation with decorative washers, plus optional concealed and back-to-back mounting configurations available.
Professional Aesthetics: Plymouth curved design offers elegant styling suitable for offices, conference rooms, and mixed-use buildings.

Technical Specifications

ANSI/BHMA: ANSI A156.06
Commercial/Residential: Commercial
Department: Door Hardware
Duty Level: Heavy Duty
Product Category: Door Trim and Accessories
Product Group: Door Trim and Accessories
Product Model: 8320
Product Subgroup: Door Pulls, Push and Pull Plates
Product Substrate: Brass or Stainless Steel
Product Type: Door Pulls
Subcategory: Pulls and Push Plates

Installation & Operation

Review manufacturer specifications and verify door preparation requirements including door thickness and mounting hole locations for 20" center-to-center spacing.
Use manufacturer-provided templates to mark mounting hole locations accurately on door surfaces.
Prepare door by drilling required holes per manufacturer specifications for thru-bolt mounting or selected optional mounting configuration.
Install mounting hardware using provided thru-bolts and decorative washers, or optional concealed/back-to-back hardware as specified.
Secure the pull to door per manufacturer torque specifications ensuring proper alignment and solid attachment.
Test pull operation to verify secure mounting and comfortable grip operation. Refer to manufacturer documentation for complete installation details and optional mounting configurations.

Professional Applications

Commercial Office Buildings
Educational Facilities
Healthcare Institutions
Retail Establishments
Mixed-Use Buildings
Conference Rooms and Meeting Spaces
Government and Municipal Buildings

Why Choose Ives Quality?

Ives Plymouth door pulls deliver professional-grade reliability with solid construction and heavy-duty mounting hardware meeting ANSI A156.06 standards. The coordinated design options with Schlage and Von Duprin hardware create unified building aesthetics while providing the durability required for demanding commercial applications.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Product Group:: Door Trim and Accessories
Duty Level:: Heavy Duty
Subcategory:: Pulls and Push Plates
Product Subgroup:: Door Pulls, Push and Pull Plates
Product Type:: Door Pulls
ANSI/BHMA:: ANSI A156.06
Commercial/Residential:: Commercial
Product Model:: 8320
Product Category:: Door Trim and Accessories
Product Substrate:: Brass or Stainless Steel
Department:: Door Hardware

Ives 8320 20 626 – Frequently Asked Questions

1) What is the hole spacing on the Ives 8320 Plymouth pull, and will it line up with an existing pull's holes?

The 8320 Plymouth pull mounts on 20 inch centers, so the two mounting holes in the door have to sit exactly 20 inches apart. If the pull you are replacing used a different center-to-center spacing, the old holes will not line up and you will be drilling fresh ones. On glass or metal doors where you cannot re-drill, measure the existing spacing first and match it rather than assuming.

2) Is the Ives 8320 pull brass or stainless steel?

Depends on the finish you order. The Plymouth 8320 is built on a brass substrate for most finishes, and on stainless steel for 630 (Satin Stainless Steel) and 631. So a 626 satin chrome pull is plated brass, while a 630 is solid stainless. That matters for exterior or coastal openings and for wash-down areas, where buyers often specify 630 for the stainless base.

3) Will the Ives Plymouth pull match my Schlage levers and Von Duprin exit devices?

Yes, the Plymouth design is built to coordinate with Schlage and Von Duprin lever and knob designs, so an office or lobby running Schlage trim can carry the same look through to the pull doors. Match the finish code as well as the design, 626 satin chrome being the common commercial pairing.

4) How does the Ives 8320 mount, and can I get it back-to-back with another pull?

Standard mounting is thru-bolt with decorative washers, and the hardware comes with the pull. Ives also offers concealed mounting and back-to-back configurations as options, so you can put pulls on both faces of the door sharing one set of fasteners. Thru-bolt is what you want on a high-traffic opening because the load goes through the door rather than into surface screws.

5) Does the Ives 8320 pull meet ANSI standards for commercial door hardware?

The Plymouth 8320 meets ANSI A156.06, the BHMA standard covering architectural door trim, and is classified heavy duty for commercial use. That is the citation a spec writer or institutional buyer needs on a hardware schedule for pulls and push plates.

6) What is the closest equivalent to the Ives 8320 Plymouth pull from another manufacturer?

The Ives 8320 Plymouth is an offset solid pull with 20 inch center-to-center mounting and a 1-1/4 inch maximum grip diameter, thru-bolted with decorative washers. The nearest peer in offset form is the ABH AB3310, an offset flat end door pull built for surface mount commercial use, and the ABH AB3330, an offset round end pull offered with custom length options if you need a center-to-center other than 20 inches. The AB3330 round end profile is the closer match to the Plymouth curved shape; the AB3310 flat end reads more squared at the returns.

7) How thick is the grip on the Ives Plymouth 8320 pull?

Grip diameter runs up to 1-1/4 inches at its thickest point on the Plymouth curved pull. That is a full-hand grip, heavier in the hand than the slimmer commercial pulls (the ABH AB7200 is a 7/8 inch flat end pull, the AB3300 a 1 inch). If you are standardizing a building and want the pulls to feel the same door to door, the grip diameter is the number to match, not just the length.

8) What finishes does the Ives 8320 Plymouth 20 inch pull come in?

Seven: 605 bright brass, 613 satin bronze oil-rubbed, 619 satin nickel, 625 bright chrome, 626 satin chrome, 630 satin stainless steel, and 622 matte black. On a commercial job 626 and 630 are the two that usually match existing lever and exit hardware; 613 and 622 are the decorative picks for lobby and conference room doors.

9) Do I need a push plate on the other side of the door with the Ives 8320 pull?

On a push-pull opening you pull from one face and push from the other, and the 8320 is the pull half only. Pair it with a push plate in a matching finish, such as the Trimco 1001-1 heavy duty push plate at 3 x 12 inches, the Trimco 1041 half-round at 8 x 16 inches, or the Trimco 1070 Series classic push/pull plates at 3-1/2 x 15 inches. If you want a pull on both faces instead, order the back-to-back mounting configuration.

10) Offset pull or straight pull, which should I use on a commercial door?

An offset pull like the Plymouth 8320 stands the grip away from the door face on curved arms, which gives clearance for a gloved hand or a full grip and reads as a decorative piece. A straight flat-end pull sits closer to the door and is the plainer utility choice, the ABH AB3300 being a 1 inch diameter straight flat end version. Offset round end pulls are also available in custom lengths from ABH under the AB3330 Series if 20 inch centers is not the spacing you need.

11) What part number do I order for an Ives Plymouth pull in satin stainless?

Order 8320 20 630. The number breaks down as model 8320, the 20 inch center-to-center dimension, then the finish code. Satin chrome is 8320 20 626, bright brass 8320 20 605, and matte black is listed as 8320 20 BLK. Distributors matching a submittal should quote the full string, not just the 8320.

12) Is a Trimco 1070 push/pull plate a substitute for the Ives 8320?

No. The Ives 8320 Plymouth is an offset pull handle you grip, with a 1-1/4 inch maximum grip diameter. The Trimco 1070 Series are classic push/pull plates measuring 3-1/2 inch by 15 inch, and the Trimco 1001-1 is a heavy duty push plate at 3 inch by 12 inch, with the Trimco 1041 a half-round push plate at 8 inch by 16 inch. Plates cover the door face and take the hand or the shoulder against a flat surface; they do not give you a handle to pull on. If the door needs to be pulled open, the plates are the wrong part. A common pairing is a pull on the pull side and a push plate on the push side.

13) What is the difference between the Ives 8320 and a straight pull like the ABH AB3300?

The Ives 8320 Plymouth is an offset design, meaning the grip stands out from the door on returns that angle away from the mounting points, with a 1-1/4 inch maximum grip diameter. The ABH AB3300 is a straight flat end pull handle at 1.00 inch diameter, and the ABH AB7200 is a solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting. A straight pull runs parallel to the door face across its full length; an offset pull gives more knuckle clearance at the ends. The smaller diameters on the ABH handles fill the hand differently than the 1-1/4 inch Plymouth grip, which matters on doors used with gloves or in high-traffic entries.

14) I need a pull for a restroom door that people can open without touching it with their hands - is the Ives 8320 right?

The Ives 8320 Plymouth is a conventional offset grip pull meeting ANSI A156.06, suited to offices, conference rooms and mixed-use entries. For a restroom door where the goal is opening it with a forearm or elbow rather than the hand, the Trimco 1035 Ultimate Restroom Pull is the purpose-built heavy duty part for that opening. Specify the 8320 where a standard commercial grip pull is what the door calls for, and the 1035 where the restroom hands-free detail is the point.

15) Does the Cal-Royal PUL-175 do the same job as the Ives 8320?

No. The Ives 8320 Plymouth is a 20 inch center-to-center offset pull for general commercial openings. The Cal-Royal PUL-175 is a night latch cylinder pull at 3-1/2 inch height in stainless steel construction - a short pull built to mount over a rim cylinder on a night latch application, not a full-length door pull. If your door has a cylinder to dress and a short grip is what the opening needs, the PUL-175 is the part. If you are pulling a storefront or office door open by a full grip, the 8320 is.

16) Which pull should I standardize on across a building if I am already running Schlage locks?

The Ives 8320 Plymouth is the pull to look at first in that case - it is a heavy duty commercial pull meeting ANSI A156.06 that coordinates with Schlage and Von Duprin lever and knob designs, so the trim reads as one family across the building. It comes in seven finishes including 626 satin chrome and 630 satin stainless steel, which are the two most commonly specified across commercial door hardware, so matching existing lever finishes is straightforward. Peer pulls such as the ABH AB3310 offset flat end and the Sure-Loc PL-1RD round long pull are sound commercial parts, but they are not designed to coordinate with a Schlage lever line.

17) What if I need a longer pull than 20 inches for a storefront or entrance door?

The Plymouth 8320 in this configuration is fixed at 20 inch centers. For a taller grab on a full-height entrance, Deltana makes 24 inch back-to-back offset pulls in both modern (SSPOBB24) and round offset (SSPORBB24) profiles, and the ABH AB3330 Series offset round end pull is offered with custom length options. Sure-Loc also lists long single-sided pulls in knurled, round and square profiles.

18) I need a grip that will not slip in wet or gloved hands - is the Ives 8320 the right choice?

The Ives 8320 Plymouth has a smooth curved profile with a 1-1/4 inch maximum grip diameter, which fills the hand well but offers no surface texture. Where grip security is the driver, the Sure-Loc PL-1KN is a knurled long door pull in a single-sided thru-bolt configuration, and the PL-2KN is the same knurled pull in a double-sided configuration. Knurling gives a textured surface at the hand; the Plymouth gives a polished decorative face that suits finished office and lobby work.

How fast can I get the Ives 8320 20 626 delivered?

Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.

Can I return it if it doesn’t work for me?

Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.

Does the Ives 8320 20 626 come with a warranty?

Absolutely. The Ives 8320 20 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.

How do I get technical support or installation help for the Ives 8320 20 626?

You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us

Why buy the Ives 8320 20 626 from ZenSupply?

ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Ives 8320 Plymouth Curved Door Pull with 20" Center-to-Center Mounting

Write a Review

Ives