Ives 8303 Heavy Duty Pull Plat...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$170.00
$73.91
IV_8303_626_HO_square

Ives 8303 Heavy Duty Pull Plate with 8" or 10" Center-to-Center Mounting

(No reviews yet) Write a Review

Model: IVE-8303-8-4x16-US32D
$170.00
$73.91
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$170.00
$73.91
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Ives 8303 Heavy Duty Pull Plate with 8" or 10" Center-to-Center Mounting

Professional Pull Plate Solution for Commercial Door Applications

The Ives 8303 Pull Plate delivers heavy-duty performance for commercial door applications with mounting hardware that exceeds industry standards. This professional-grade pull plate comes prepped with 2 pull mounting holes spaced at 8" or 10" center-to-center and features standard mounting hardware for door thickness of 1-1/2" to 1-3/4". Available in brass, aluminum, or stainless steel substrates with ANSI A156.06 Grade 1 compliance for demanding commercial installations.

Professional Features & Benefits

  • Heavy-Duty Mounting Hardware: 3/8-16 mounting hardware exceeds industry standards for superior holding power and long-term reliability.
  • Flexible Door Thickness Compatibility: Standard mounting for 1-1/2" to 1-3/4" door thickness with optional packages available for 2" and 2-1/4" thick doors.
  • Multiple Pull Spacing Options: Plate prepped with 2 pull mounting holes spaced at 8" or 10" center-to-center for versatile pull configurations.
  • Premium Construction: Available in brass, aluminum, or stainless steel substrates with all stainless steel plates featuring 300 series construction.
  • Professional Aesthetics: All plates feature four beveled edges and countersunk mounting holes for a clean, finished appearance.
  • ANSI A156.06 Grade 1 Compliance: Meets rigorous commercial standards for heavy-duty door hardware applications.
  • Comprehensive Mounting Options: Standard through bolt screws with decorative washers plus optional TEK/TORX packages and concealed mounting solutions.
  • Substrate Compatibility: Integrates with aluminum, wood, or hollow metal doors for versatile installation options.

Technical Specifications

  • ANSI/BHMA: ANSI A156.06
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Duty Level: Heavy Duty
  • Product Category: Door Trim and Accessories
  • Product Group: Door Trim and Accessories
  • Product Model: 8303
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Substrate: Brass, Aluminum or Stainless Steel
  • Product Type: Push and Pull Plates
  • Subcategory: Pulls and Push Plates

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and handing as applicable to this product.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door and/or frame surfaces.
  3. Prepare door and frame by drilling required holes and routing as specified in manufacturer instructions.
  4. Install all mounting hardware and secure the device to door and frame per manufacturer torque specifications.
  5. Adjust operational components for proper alignment, latching, and smooth operation throughout the full range of motion.
  6. Test device operation to verify proper function and make final adjustments as needed. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Ives Quality?

Ives 8303 Pull Plates deliver professional-grade reliability with heavy-duty mounting hardware that exceeds industry standards and ANSI A156.06 Grade 1 compliance. Available in multiple substrate options including 300 series stainless steel construction for demanding commercial applications. Engineered for demanding commercial applications where dependable performance and aesthetic coordination with surrounding door hardware is essential.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Product Group:
Door Trim and Accessories
Duty Level:
Heavy Duty
Subcategory:
Pulls and Push Plates
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
ANSI/BHMA:
ANSI A156.06
Commercial/Residential:
Commercial
Product Model:
8303
Product Category:
Door Trim and Accessories
Product Substrate:
Brass, Aluminum or Stainless Steel
Department:
Door Hardware

Ives IVE-8303-8-4x16-US32D – Frequently Asked Questions

1) What center-to-center spacing does the Ives 8303 pull plate come prepped for?
The plate is prepped with two pull mounting holes at either 8 inch or 10 inch center-to-center, and you pick the spacing when you order. Measure the mounting hole spacing on the pull you plan to hang (or the pull already on the door) and match it. The prep is fixed at the factory, so a 10 inch pull will not land on an 8 inch plate.
2) What plate sizes does the Ives 8303 come in?
Three plate sizes: 3.5 x 15 inches, 4 x 16 inches, and 6 x 16 inches. On a narrow aluminum stile door the 3.5 x 15 is usually the only one that clears the glass stop; the 6 x 16 gives you more coverage over an existing worn or drilled area on a wood or hollow metal door.
3) Can I mount an Ives 8303 pull plate on an aluminum storefront door?
Yes, the 8303 mounts to aluminum, wood, or hollow metal doors. Watch the stile though: the plate widths run 3.5, 4, and 6 inches, and a narrow storefront stile generally only takes the 3.5 x 15. Check the flat face of your stile before choosing the width.
4) Is the Ives 8303 pull plate rated for a high traffic commercial door?
It is a heavy duty commercial plate meeting ANSI A156.06 Grade 1, with 3/8-16 mounting hardware that Ives states exceeds industry standards for holding power. That is the grade you want on a school corridor, hospital, or retail entry where the door gets pulled thousands of times a week.
5) What is the closest cross-brand equivalent to the Ives 8303 pull plate in a 4 inch by 16 inch size?
The Delaney 4" x 16" Door Pull Plate is the direct size match. The Ives 8303 is offered in 3.5" x 15", 4" x 16", and 6" x 16" plate sizes, and the Delaney 4" x 16" pull plate covers the middle of that range in the same plate-with-pull format. The difference is in the pull spacing: the 8303 is prepped with two pull mounting holes at 8 inch or 10 inch center-to-center, so if the existing pull on the door is on 8 or 10 inch centers, the 8303 is the one that repeats it.
6) I only need to protect the door face on the push side - do I need the Ives 8303?
No. The 8303 is a pull plate, meaning the plate carries a pull on 8 inch or 10 inch centers for the side the door is pulled from. For the push side, a plain push plate is the right part - the Delaney 3-1/2" x 15" Push Plate and the Delaney 4" x 16" Push Plate are flat plates in the same two footprints, with no pull attached. On a single door it is common to order a push plate for one face and a pull plate for the other.
7) The existing pull on our doors is on 5 inch centers - what heavy duty pull plate fits that instead of the Ives 8303?
The Trimco 1010 Series Cast Pull Plate is built with a 5 inch center-to-center pull and is rated heavy duty, so it lands on the existing prep without redrilling. The Ives 8303 is prepped only at 8 inch or 10 inch center-to-center, so it will not reuse a 5 inch hole pattern. If the centers measure closer to 5-1/2 inches, the Trimco 1012 cast tapered pull plate and the Trimco 1013 round pull plate are both built at 5.5 inch CTC and both are heavy duty.
8) Which pull plate should I use on a door with a Detex Value Series exit device?
Use the Detex P/PN Series Pull Plate, which is made for the Value Series exit devices and is dimensioned to work with that device on the door. The Ives 8303 is a general commercial pull plate prepped at 8 inch or 10 inch center-to-center and is not built around a specific exit device, so on an exit-device opening the device-specific Detex plate is the safer order.
9) For a school or hospital corridor door, does the Ives 8303 or the Trimco 1014 meet a heavy duty requirement?
The Ives 8303 is designated heavy duty and meets ANSI A156.06, which is the standard a facility spec for architectural door trim usually calls out. Among the Trimco plates, the 1010, 1012, and 1013 are each designated heavy duty; the Trimco 1014 half-round pull plate with 6 inch CTC is the one in that group without that designation. If the spec sheet says heavy duty, the 8303 or the Trimco 1010, 1012, or 1013 will answer it.
10) Our doors have a 6 inch center-to-center pull - can the Ives 8303 replace it?
Not on the existing holes. The Ives 8303 is prepped at 8 inch or 10 inch center-to-center only. The Trimco 1014 Series Half-Round Pull Plate is built with a 6 inch CTC pull and will match that prep directly. Choosing the 8303 for a 6 inch opening means new mounting holes in the door face.
11) Can I use the Ives 8303 pull plate on a door with an exit device?
The 8303 is a general purpose pull plate for aluminum, wood, or hollow metal doors, not device-specific trim. If you are replacing the pull side of an exit device, the trim usually has to match the device family, and the Detex P/PN Series pull plate is built specifically for Detex Value Series exit devices. Match device trim to the device rather than substituting a general pull plate.
12) What mounting hardware comes with the Ives 8303 pull plate and what are my other options?
Standard is 3/8-16 through bolt screws with decorative washers, which is what most commercial installs use. Optional TEK/TORX packages are available if you want a tamper-resistant head, and concealed mounting is offered where you do not want fasteners showing on the push side. Decide this at order time, since it is a hardware pack, not something you swap later.
13) What finish do I order to match the rest of my door hardware on an Ives 8303?
Twelve finishes: 605 bright brass, 606 satin brass, 612 satin bronze, 613 satin bronze oil-rubbed, 619 satin nickel, 625 bright chrome, 626 satin chrome, 628 clear anodized aluminum, 630 satin stainless, 631 matte black, 643E aged bronze, and 695 dark bronze. If you are standardizing a building, 630 satin stainless and 626 satin chrome are the two that match most commercial lever and closer finishes; 628 is the one that matches clear anodized aluminum storefront.
14) Is the Ives 8303 stainless steel plate actually stainless, and what grade?
The 8303 is offered in brass, aluminum, or stainless steel substrates, and every stainless plate is 300 series. That matters on exterior and coastal openings and in healthcare, where a plated finish over a base metal will not hold up to repeated cleaning. All plates get four beveled edges and countersunk mounting holes.
15) Do I need a pull plate or just a push plate?
A pull plate is drilled to accept a door pull and protects the face around it; a push plate is a blank plate for the swing side that takes no pull at all. The 8303 is the pull side, prepped with two holes at 8 or 10 inch centers. If you are doing both faces of the same door, you want a plate of each. ZenSupply carries push plates in matching sizes from Delaney, including the 3-1/2 x 15 and 4 x 16 push plates.
16) What else could I use instead of the Ives 8303 pull plate?
For the same 4 x 16 footprint at a lighter spec, the Delaney 4 x 16 door pull plate is the straightforward swap, and Delaney also does a 3-1/2 x 15 that matches the 8303's smallest size. If you want a cast plate with an integral pull rather than a plate you hang a separate pull on, look at the Trimco 1010 Series (5 inch CTC) or the 1012 cast tapered plate (5.5 inch CTC), both heavy duty. On the decorative side, Emtek's Knoxville, Modern, and Petal push and pull plate sets suit hospitality and higher-end tenant spaces.
17) Is there a 3-1/2 inch by 15 inch pull plate from another manufacturer that matches the smallest Ives 8303?
Yes. The Delaney 3-1/2" x 15" Door Pull Plate is built in that plate size, and the Ives 8303 is also made in a 3.5" x 15" plate. Both are pull plates rather than plain push plates, so either will take the hand on the pull side of the opening. Confirm the pull spacing before ordering: the 8303 in that size carries pull holes on 8 inch or 10 inch centers.
18) What is the difference between the Ives 8303 and the Trimco 1012 and 1013 pull plates?
All three are heavy duty pull plates, and the split is pull spacing and pull shape. The Ives 8303 carries its two pull holes at 8 inch or 10 inch center-to-center. The Trimco 1012 is a cast tapered pull on 5.5 inch centers and the Trimco 1013 is a round pull on 5.5 inch centers, so those two put the grip closer together and offer a shaped versus round pull profile. Spec the 8303 when the taller grip span is wanted or when matching an existing 8 or 10 inch prep.
19) We want a decorative push and pull plate set for a lobby entrance rather than the Ives 8303 - what are the options?
Emtek makes three push and pull plate designs in this family: the Knoxville, the Modern, and the Lost Wax Cast Bronze Petal. Each is sold as a push and pull plate design rather than a single utility plate, so they suit a front-of-house opening where the look is part of the spec. The Ives 8303 sits at the other end - a heavy duty commercial plate meeting ANSI A156.06 in brass, aluminum, or stainless steel, with finishes from bright brass through satin stainless and matte black.
20) Is the Delaney 4 inch by 16 inch push plate a substitute for the Ives 8303 in the same size?
No, and the part names are close enough to cause a mis-order. The Delaney 4" x 16" Push Plate is a flat plate with no pull on it; the Ives 8303 in 4" x 16" carries two pull mounting holes at 8 inch or 10 inch center-to-center. The size-for-size pull substitute from Delaney is the 4" x 16" Door Pull Plate. Check whether the drawing calls for a push plate or a pull plate on that face before ordering.
21) We are standardizing pull plates across a portfolio in satin stainless - which line gives the widest finish coverage?
The Ives 8303 runs twelve finishes, including 605 bright brass, 606 satin brass, 612 satin bronze, 619 satin nickel, 625 bright chrome, 626 satin chrome, 628 clear anodized aluminum, 630 satin stainless steel, 631 matte black, 643E aged bronze, and 695 dark bronze, across brass, aluminum, and stainless substrates and three plate sizes. That range lets one model cover front-of-house and back-of-house doors in a single fleet. The Delaney and Trimco plates are each built around a single plate footprint or pull spacing, so standardizing on them means selecting a different part for each size or CTC.
22) Will an Ives 8303 cover the marks left by the old pull plate I am replacing?
Depends on the old plate's footprint. The 8303 comes in 3.5 x 15, 4 x 16, and 6 x 16 inches, so stepping up to the 6 x 16 is the usual move when the previous plate was smaller or the door face is scuffed and drilled around it. Take the old plate off, measure the marked area, and pick the size that covers it. The mounting holes are countersunk and the four edges beveled, so it sits flat against the door face.
How fast can I get the Ives IVE-8303-8-4x16-US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives IVE-8303-8-4x16-US32D come with a warranty?
Absolutely. The Ives IVE-8303-8-4x16-US32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives IVE-8303-8-4x16-US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ives IVE-8303-8-4x16-US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!