Name: Ives 8371 Addison Flat Tip Straight Solid Door Pull with 1" Round Profile
Brand: Ives
SKU: 8371 2 626
Price: 822.06 USD
Availability: InStock

Product Overview
FAQs

Ives Addison Flat Tip Straight Solid Door Pull with 1" Round Profile

Professional Decorative Door Pull Solution

The Ives Addison Flat Tip Straight Solid Door Pull features a 1" round pull design with 1-1/4" base mounting posts, available in 12", 18", and 24" sizes. This commercial-grade door pull is constructed with brass substrate and meets ANSI A156.06 standards for professional applications. The decorative design coordinates with Schlage and Von Duprin lever and knob options for unified building hardware aesthetics.

Professional Features & Benefits

Multiple Size Options: Available in 12", 18", and 24" lengths to accommodate various door applications and design requirements.
Heavy-Duty Construction: 1" round pull with 1-1/4" base mounting posts and brass substrate provides exceptional durability for commercial use.
ANSI Compliance: Meets ANSI A156.06 standards ensuring professional-grade performance and reliability.
Design Coordination: Decorative styling coordinates with Schlage and Von Duprin lever and knob designs for unified building aesthetics.
Versatile Mounting Options: Standard thru-bolt installation with decorative washers, plus optional concealed and back-to-back mounting configurations available.
Professional Aesthetics: Flat tip design with straight profile offers elegant styling suitable for modern and traditional commercial applications.
Custom Length Availability: Special custom lengths available for unique applications requiring non-standard dimensions.

Technical Specifications

ANSI/BHMA: ANSI A156.06
Commercial/Residential: Commercial
Department: Door Hardware
Product Category: Door Trim and Accessories
Product Dimension: 3-7/16" x 2" x 12"-24"
Product Group: Door Trim and Accessories
Product Model: 8371
Product Subgroup: Door Pulls, Push and Pull Plates
Product Substrate: Brass
Product Type: Door Pulls
Subcategory: Pulls and Push Plates

Installation & Operation

Review manufacturer specifications and verify door preparation requirements including door thickness and mounting location for proper pull placement.
Use manufacturer-provided templates to mark mounting hole locations accurately on door surfaces for the selected pull length.
Prepare door by drilling required holes per manufacturer specifications for thru-bolt mounting or selected mounting configuration.
Install mounting hardware using provided thru-bolts and decorative washers, or optional mounting hardware for concealed or back-to-back applications.
Adjust pull alignment and secure all fasteners to manufacturer torque specifications for proper installation.
Test pull operation to verify secure mounting and smooth function. Refer to manufacturer documentation for complete installation details and optional mounting configurations.

Professional Applications

Commercial Office Buildings
Educational Facilities
Healthcare Institutions
Retail Establishments
Mixed-Use Buildings
Conference Rooms and Meeting Spaces
Government and Municipal Buildings

Why Choose Ives Quality?

Ives decorative door pulls deliver professional-grade reliability with brass substrate construction and ANSI A156.06 compliance for demanding commercial applications. The heavy-duty mounting hardware and multiple size options provide versatile solutions for unified building design. Engineered to coordinate with major hardware manufacturers for complete aesthetic integration throughout professional facilities.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Product Group:: Door Trim and Accessories
Subcategory:: Pulls and Push Plates
Product Subgroup:: Door Pulls, Push and Pull Plates
Product Type:: Door Pulls
ANSI/BHMA:: ANSI A156.06
Commercial/Residential:: Commercial
Product Model:: 8371
Product Dimension:: 3-7/16" x 2" x 12"-24"
Product Category:: Door Trim and Accessories
Product Substrate:: Brass
Department:: Door Hardware

Ives 8371 2 626 – Frequently Asked Questions

1) What lengths does the Ives 8371 Addison door pull come in, and can I get a custom length?

Three stock lengths on the 8371 Addison: 12 inch, 18 inch, and 24 inch. Ives also makes special custom lengths for openings that don't take a stock size. On a full-height glass or aluminum entrance the 24 inch is the usual call; the 12 inch suits an interior office or conference door where the pull is just a grab point.

2) How does the Ives 8371 pull mount to the door, and does it come with the mounting hardware?

Standard mounting on the 8371 is thru-bolt with decorative washers, and that hardware comes with the pull. Concealed mounting and back-to-back mounting are available as optional configurations, so if you want a pull on both faces of the door or no visible fastener heads, that has to be specified when you order rather than added later. Thru-bolt means the door gets drilled all the way through at both post locations, so you need access to both faces.

3) What are the dimensions of the Ives Addison 8371 pull, including how far it stands off the door?

The 8371 Addison measures 3-7/16 x 2 x 12 to 24 inches depending on the length ordered. The grip itself is a 1 inch round bar on 1-1/4 inch base mounting posts. Those numbers matter where the pull sits near a frame, a mullion, or a second leaf of a pair: check the clear space beside the pull before committing, because the bar plus post depth is what your knuckles need.

4) Will the Ives 8371 match the Schlage levers already on my other doors?

Yes. The Addison decorative styling is made to coordinate with Schlage and Von Duprin lever and knob designs, which is the reason to pick it over a generic straight pull when you're standardizing a building. Finish is the other half of that match: the 8371 comes in 605 bright brass, 613 satin bronze oil-rubbed, 619 satin nickel, 622 matte black, 625 bright chrome, and 626 satin chrome. 626 satin chrome is the most common commercial pairing.

5) Is the Ives 8371 Addison pull rated for a commercial opening or is it a residential pull?

Commercial. The 8371 is built to ANSI A156.06, which is the BHMA standard covering architectural door trim, and it's classified for commercial use rather than residential. For a school, hospital, or office corridor where the pull gets cycled all day, that standard is the line an MRO or institutional spec usually requires. Substrate is brass.

6) Do I need one pull per door or a back-to-back pair?

The 8371 as ordered is a single pull. A pull-only door (push side has a push plate or an exit device) takes one. A door that is pulled from both faces, like an interior glass office door, needs the back-to-back mounting configuration, which is an optional setup on the Addison rather than the default thru-bolt with decorative washers. If you'd rather buy a purpose-built back-to-back set, the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back pulls, and the Deltana OHP620 is an offset back-to-back set for doors 1-1/8 to 1-3/8 inches thick.

7) What is the closest equivalent to the Ives 8371 Addison pull if the Ives line is not an option?

The ABH AB3300 is the nearest match in form. The Ives 8371 Addison is a flat tip straight solid pull with a 1 inch round profile, and the ABH AB3300 is a straight flat end pull handle with a 1.00 inch diameter, so the grip section and the end treatment line up. The 8371 has a brass substrate and meets ANSI A156.06; the AB3300 is sold as a commercial door pull in the AB3300 Series. Mounting hole spacing still has to be checked against the existing door prep before either one goes on a drilled door.

8) I need a 24 inch pull on both faces of the door. Is the Ives 8371 the right call or is there a back-to-back set?

The Ives 8371 Addison comes in a 24 inch length, and its standard installation is thru-bolt with decorative washers, with optional concealed and back-to-back mounting configurations. If you would rather order a set that is sold as back-to-back out of the box, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset door pull set, and the Deltana SSPORBB24 is a 24 inch back-to-back round offset set. Both Deltana sets use an offset body; the 8371 grip is straight with a 1 inch round profile.

9) Straight pull or offset pull, which should I use on a commercial door?

A straight pull like the 8371 Addison runs parallel to the door edge and gives a clean 1 inch round grip, which is what you want on a narrow stile or where the pull has to sit tight to the edge. An offset pull kicks the grip away from the mounting posts and gives more knuckle clearance, which helps on a heavy door someone has to haul open. For offset, the ABH AB3310 is a flat end offset pull and the AB3330 is a round end offset with custom length options. Both mount surface, same as the Addison.

10) What's a stainless steel alternative to the brass Ives 8371 pull?

The Addison 8371 is brass substrate, plated to the finish you order. If the opening is coastal, a wet room, or a wash-down area where you'd rather have solid stainless, the ABH AB7200 is a solid stainless steel flat end pull with through-bolt mounting and a 7/8 inch diameter grip, slightly slimmer than the Addison's 1 inch bar. The ABH AB3300 is another 1 inch diameter straight flat end pull if you want to hold the same grip size.

11) How do I write the part number for an Ives Addison pull in matte black, 24 inch?

That one is 8371 24 BLK. Ives builds the number as model, then length, then finish: 8371 24 605 for 24 inch bright brass, 8371 18 626 for 18 inch satin chrome, and so on. The 12 inch length is coded 2, so 12 inch satin nickel reads 8371 2 619. Every one of the six finishes is offered in all three lengths.

12) Can I use the Ives 8371 pull on a restroom door where people don't want to touch the handle?

The 8371 is a conventional grip pull, so it's a hand-on-the-bar product. For a restroom exit where the ask is to open the door without gripping, the Trimco 1035 Ultimate Restroom Pull is the purpose-built heavy duty option. Use the Addison for the corridor and office doors and put the 1035 on the restroom leaf if that's the requirement.

13) Is a Trimco push plate a substitute for the Ives 8371 pull?

No. They are the two halves of a push/pull opening, not alternates. The Ives 8371 Addison is a door pull, a graspable 1 inch round bar in 12, 18, and 24 inch lengths, mounted on the pull side. The Trimco 1001-1 is a heavy duty push plate at 3 inches by 12 inches and the Trimco 1041 is a half-round push plate at 8 inches by 16 inches, both flat plates for the push side. If you want one part that covers both roles, the Trimco 1070 Series classic push/pull plates measure 3-1/2 inches by 15 inches.

14) For a restroom door where people pull with a forearm or a towel, is the Addison 8371 the right pull?

The Ives 8371 Addison is a 1 inch round straight pull for general commercial openings in offices, schools, healthcare, and retail. For a restroom exit specifically, the Trimco 1035 Ultimate Restroom Pull is built for that opening and is rated heavy duty. Choose the 8371 where you want the round bar profile to coordinate across the building, and the 1035 where the restroom exit is the whole job.

15) What is the difference between the Ives 8371 and the Deltana SSP1210 at 12 inches?

Both give you a 12 inch pull. The Ives 8371 Addison at 12 inches is a flat tip straight solid pull with a 1 inch round profile and 1-1/4 inch base mounting posts, brass substrate, meeting ANSI A156.06, and it is offered in bright brass, oil-rubbed satin bronze, satin nickel, bright chrome, satin chrome, and matte black. The Deltana SSP1210 is a 12 inch contemporary pull supplied single side from the Contemporary Pulls line. The 8371 also scales to 18 and 24 inches if other openings in the same building need longer grips.

16) The opening has a night latch cylinder. Can I order the Addison 8371 for it?

No, that is a different part. The Ives 8371 Addison is a straight solid pull in 12, 18, and 24 inch lengths with no cylinder provision. A night latch opening needs a cylinder pull such as the Cal-Royal PUL-175, which is 3-1/2 inches high in stainless steel construction and is made to carry the cylinder. If the door also wants a long grip for aesthetics, the 8371 is an addition to that, not a replacement for it.

17) Which of these pulls is stated for a 1-1/8 inch to 1-3/8 inch door?

The Deltana OHP620 off-set handle pull is supplied as a back-to-back set and carries a door thickness range of 1-1/8 inch to 1-3/8 inch, so it suits thinner leaves. The Ives 8371 Addison is a straight pull with 1-1/4 inch base mounting posts, installed thru-bolt with decorative washers or in optional concealed and back-to-back configurations, and it is a commercial-duty part in brass. Confirm leaf thickness against the mounting method you intend to use.

18) Do I need a template to lay out the holes for the Ives 8371, and what has to be checked before drilling?

Yes, Ives supplies templates and the hole spacing changes with the length you ordered, so lay out from the template for that specific size rather than measuring off the pull. Before drilling, confirm door thickness and the pull's vertical location on the leaf, and remember thru-bolt means holes go clean through the door face, so verify nothing is in the way inside a hollow metal or glass-front stile. Fasteners get torqued to the manufacturer spec and the pull checked for alignment before the job is called done.

How fast can I get the Ives 8371 2 626 delivered?

Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.

Can I return it if it doesn’t work for me?

Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.

Does the Ives 8371 2 626 come with a warranty?

Absolutely. The Ives 8371 2 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.

How do I get technical support or installation help for the Ives 8371 2 626?

You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us

Why buy the Ives 8371 2 626 from ZenSupply?

ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Ives 8371 Addison Flat Tip Straight Solid Door Pull with 1" Round Profile

Write a Review

Ives