Name: Ives 8700 Greenwich Arc Straight Solid Door Pull with 1" Round Design
Brand: Ives
SKU: 8700 2 626
Price: 258.49 USD
Availability: InStock

Product Overview
FAQs

Ives Greenwich Arc Straight Solid Door Pull with 1" Round Design

Professional Architectural Door Pull Solution

The Ives Greenwich Arc Straight Solid Door Pull features a distinctive 1" round pull with 2" base mounting posts, available in 12", 18", and 24" sizes. This commercial-grade door pull meets ANSI A156.06 standards and offers both brass and stainless steel substrate options to coordinate with existing architectural hardware throughout your building.

Professional Features & Benefits

Multiple Size Options: Available in 12", 18", and 24" lengths with custom special lengths available for specific applications.
Dual Substrate Construction: Brass substrate for traditional finishes or stainless steel substrate for finishes 630 and 631, ensuring proper material compatibility.
Heavy-Duty Mounting Hardware: Comes standard with thru-bolts and decorative washers for secure installation with additional mounting options available.
ANSI A156.06 Compliance: Meets industry standards for architectural door pulls ensuring reliable performance in commercial applications.
Design Coordination: Coordinates with Schlage and Von Duprin lever and knob designs for unified architectural hardware throughout mixed-use buildings and offices.
Versatile Mounting Options: Standard thru-bolt installation with optional concealed, back-to-back, and specialized mounting hardware available for various door types.
Professional Aesthetics: Greenwich Arc design offers elegant styling that communicates professionalism while updating classic door pull designs.

Technical Specifications

ANSI/BHMA: ANSI A156.06
Commercial/Residential: Commercial
Department: Door Hardware
Product Category: Door Trim and Accessories
Product Dimension: 2-3/8" x 1-5/8" x 9"-24"
Product Group: Door Trim and Accessories
Product Model: 8700
Product Subgroup: Door Pulls, Push and Pull Plates
Product Substrate: Brass or Stainless Steel
Product Type: Door Pulls
Subcategory: Pulls and Push Plates

Installation & Operation

Review manufacturer specifications and verify door preparation requirements including door thickness, stile width, and mounting location for the selected pull length.
Use manufacturer-provided templates to mark mounting hole locations accurately on door surfaces, ensuring proper alignment for the 2" base mounting posts.
Prepare door by drilling required holes for thru-bolt installation or selected mounting hardware configuration.
Install mounting hardware and secure the Greenwich Arc pull to door per manufacturer torque specifications using provided thru-bolts and decorative washers.
Adjust pull position for proper alignment and verify secure mounting throughout the full range of door operation.
Test pull operation to verify proper function and structural integrity. Refer to manufacturer documentation for complete installation details and optional mounting configurations.

Professional Applications

Commercial Office Buildings
Mixed-Use Residential and Commercial Properties
Conference Rooms and Meeting Spaces
Educational Facilities
Healthcare Institutions
Retail and Hospitality Establishments
Government and Municipal Buildings

Why Choose Ives Quality?

Ives Greenwich Arc door pulls deliver professional-grade reliability with heavy-duty mounting hardware and ANSI A156.06 compliance for demanding commercial applications. The dual substrate construction options and coordinated design compatibility with major lever manufacturers ensure both durability and aesthetic consistency throughout your architectural hardware specification.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Product Group:: Door Trim and Accessories
Subcategory:: Pulls and Push Plates
Product Subgroup:: Door Pulls, Push and Pull Plates
Product Type:: Door Pulls
ANSI/BHMA:: ANSI A156.06
Commercial/Residential:: Commercial
Product Model:: 8700
Product Dimension:: 2-3/8" x 1-5/8" x 9"-24"
Product Category:: Door Trim and Accessories
Product Substrate:: Brass or Stainless Steel
Department:: Door Hardware

Ives 8700 2 626 – Frequently Asked Questions

1) What lengths does the Ives 8700 Greenwich Arc door pull come in?

Four stock lengths: 9, 12, 18 and 24 inches, and every one of them is available in all seven finishes. The 9 and 12 inch sizes are the usual choice for a single office or conference room door, 18 inches suits a main entry, and 24 inches is what you put on a full-height glass or storefront style leaf where the grip needs to read at the same scale as the door. Custom special lengths are made as well if none of the stock sizes land where you need them.

2) Do I have to order a different Ives 8700 pull for a stainless finish than for brass?

The substrate follows the finish, and you do not order it separately. Finishes 630 satin stainless steel and 631 matte black are built on a stainless steel substrate; 605 bright brass, 613 satin bronze oil-rubbed, 619 satin nickel, 625 bright chrome and 626 satin chrome are built on brass. Pick the finish code and the correct base metal comes with it. Worth knowing if you are specifying for a coastal or wash-down interior, where the 630 stainless base is the one to call out.

3) What mounting hardware comes with the Ives 8700 door pull?

Thru-bolts and decorative washers ship standard with the pull, which is the normal way these go on a wood or hollow metal door: you drill through and bolt from the opposite face. Concealed, back-to-back and other specialized mounting hardware is available as an option instead. If you are putting a pull on one face and a push plate on the other, thru-bolting into the plate is the usual arrangement; if pulls go on both faces, order the back-to-back hardware.

4) How far does the Ives 8700 pull stand off the door, and will it clear a narrow stile?

The Greenwich Arc measures 2-3/8 x 1-5/8 inches in section, with lengths running 9 to 24 inches. The grip is 1 inch round on 2 inch base posts. Those two cross-section numbers are what you check against your stile: on a narrow stile aluminum door the pull footprint has to sit inside the stile face without fouling the glass stop, and the 1-5/8 inch dimension is the one that has to fit. Measure your stile face before you commit to a straight surface-mounted pull of this size.

5) Will the Ives 8700 pull match the Schlage levers already on my other doors?

Yes, the Greenwich Arc is made to coordinate with Schlage and Von Duprin lever and knob designs, which is the practical reason to pick it when you are trimming out a building that already runs Allegion locks and exit devices. Match the finish code across the schedule, 626 satin chrome and 630 satin stainless being the two most common in commercial work, and the pull, the lever and the exit device trim read as one set.

6) What is the closest straight round door pull to the Ives 8700 Greenwich Arc if I need a 1 inch diameter grip?

The ABH AB3300 is the nearest straight equivalent. Both are straight commercial pulls built on a 1 inch round grip: the Ives 8700 uses a 1 inch round pull section on 2 inch base posts, and the ABH AB3300 is a straight flat end pull handle at 1.00 inch diameter. The difference is at the ends and the mounting posts - the Greenwich Arc carries an arced transition into 2 inch bases, while the AB3300 finishes flat. For a fleet of doors where the grip diameter is what has to match by feel and by hand clearance, either one puts the same 1 inch round in the user's hand.

7) I need an offset pull instead of a straight one for knuckle clearance - what should I order?

The Ives 8700 Greenwich Arc is a straight solid pull, so the grip runs parallel to the door face on 2 inch base posts. When the opening needs the grip standing further off the face, the ABH AB3310 is an offset flat end pull handle in a commercial grade surface mount, and the ABH AB3330 is an offset round end pull with custom length options. Both change the geometry rather than the grip: you get the same surface-mounted commercial pull with the handle carried away from the door leaf.

8) Do I need a back-to-back set instead of the Ives 8700 for a glass or full-glass entrance door?

The Greenwich Arc 8700 ships as a pull with thru-bolts and decorative washers, with back-to-back and concealed mounting available as additional hardware. When the job calls for a factory back-to-back set out of the box, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset pull set and the Deltana SSPORBB24 is a 24 inch back-to-back round offset set. Both land at the same 24 inch length the Greenwich Arc offers, so the sightline on the door face stays consistent if you are mixing them across an entry.

9) My doors are 1-1/8 inch thick - is the Deltana OHP620 a drop-in for the Ives 8700?

The Deltana OHP620 is an off-set handle pull supplied as a back-to-back set with a stated door thickness range of 1-1/8 inch to 1-3/8 inch, so a 1-1/8 inch leaf is inside its range. It differs from the Greenwich Arc 8700 in two ways that matter before you swap: the OHP620 is offset rather than straight, and it comes as a back-to-back pair, where the 8700 is a straight pull mounted with thru-bolts and decorative washers. Hole patterns will not carry over between the two.

10) Is the Ives 8700 Greenwich Arc pull rated for commercial use?

It meets ANSI A156.06, the BHMA standard for architectural door trim, and it is classed as commercial hardware. That is the line a spec writer or an institutional buyer looks for on a schedule, and it is what separates this from a decorative residential pull. The solid construction and thru-bolt mounting are the reason it holds up on a door that gets pulled a few hundred times a day.

11) Should I use a straight door pull or an offset pull?

A straight pull like the Ives 8700 mounts with both posts on the same plane and gives a clean vertical line, which is what most commercial entry and office doors get. An offset pull steps the grip out from one base, which gives you more knuckle clearance and works better where the pull sits close to a frame or a glass stop. If you need that offset geometry, the ABH AB3310 flat end and AB3330 round end offset pulls are the alternatives, and Deltana's SSPOBB24 and SSPORBB24 are 24 inch offset pulls supplied as back-to-back sets.

12) What is the closest alternative to an Ives 8700 if I want the same 1 inch round grip from another brand?

The ABH AB3300 is a straight pull handle with the same 1 inch diameter grip, so it is the nearest like-for-like swap on grip feel and sightline. If you want a slightly slimmer handle, the ABH AB7200 is solid stainless steel at 7/8 inch diameter with through-bolt mounting. Where the 8700 differs is the coordination: it is built to match Schlage and Von Duprin trim designs, which matters if the rest of the opening is Allegion.

13) Can I put an Ives 8700 pull on a 1-3/8 inch residential interior door?

Nothing in the 8700's specification limits it to a particular door thickness, since it is surface mounted and thru-bolted, and the bolt length is what has to suit the leaf. It is commercial-grade trim, though, and on a light residential door it is more pull than the opening needs. Deltana's OHP620 off-set handle pull is supplied as a back-to-back set stated for 1-1/8 to 1-3/8 inch doors, and Deltana's SSP1210 is a 12 inch contemporary single-side pull if you want something lighter for a residential leaf.

14) I need a black door pull for a commercial building. Does Ives make the 8700 in black?

Finish 631 matte black is offered in all four lengths, 9, 12, 18 and 24 inches. Note it is built on a stainless steel substrate rather than brass, same as the 630 satin stainless, so the base metal underneath the black is the corrosion-resistant one. Order codes carry BLK in place of the numeric finish, for example the 24 inch is 8700 24 BLK.

15) Is the Ives 8700 the right pull for a restroom door or a night latch application?

No, on both counts. The Greenwich Arc is a plain architectural pull with no secondary function, so it does not address a restroom exit or a cylinder cutout. For a restroom door where the point is to open it without gripping a handle, the Trimco 1035 Ultimate Restroom Pull is the heavy duty purpose-built option. For a night latch opening where the pull has to accommodate a rim cylinder, the Cal-Royal PUL-175 night latch cylinder pull is 3-1/2 inches high in stainless steel.

16) What is a simpler single-side alternative to the Ives 8700 at 12 inches?

The Deltana SSP1210 is a 12 inch contemporary pull, single side, which matches the 12 inch length the Greenwich Arc 8700 is offered in. The Ives 8700 at that length is the commercial specification, meeting ANSI A156.06 and offered in brass or stainless steel substrate. The Deltana is the contemporary-styled single-side option at the same nominal length, which is the choice to look at when the door only needs a pull on one face and the aesthetic is leading.

17) Can I use a push plate on the push side and the Ives 8700 on the pull side?

Yes, and that is the usual pairing on a single-acting door. The Greenwich Arc 8700 is the pull; on the push face the Trimco 1001-1 is a heavy duty push plate at 3 inch by 12 inch, the Trimco 1041 is a half-round push plate at 8 inch by 16 inch, and the Trimco 1070 Series classic push/pull plates run 3-1/2 inch by 15 inch. Note that the plate does the pushing and cannot serve as the pull - it is a flat protective face, not a graspable handle.

18) Which pull should I use on a restroom door instead of the Ives 8700?

The Trimco 1035 Ultimate Restroom Pull is the purpose-built option for that opening and is rated heavy duty. The Ives 8700 Greenwich Arc is a general architectural pull, ANSI A156.06 and commercial rated, available in satin stainless steel 630 and other finishes that clean well in a restroom. The 1035 is designed around the restroom exit specifically; the Greenwich Arc is the choice when the restroom door needs to match the pull hardware used everywhere else in the building.

19) I need a custom length pull that the standard Ives 8700 sizes do not cover - what are my options?

The Greenwich Arc 8700 is offered in 9 inch, 12 inch, 18 inch, and 24 inch, with custom special lengths available for specific applications. If the opening needs an offset profile at a nonstandard length, the ABH AB3330 Series is an offset round end pull specifically offered with custom length options. Both routes get you off the standard ladder; the difference is straight versus offset geometry.

20) How do I write the part number for an Ives 8700 door pull?

The number reads model, length, finish. An 18 inch in 626 satin chrome is 8700 18 626; a 24 inch in 605 bright brass is 8700 24 605; a 9 inch in 630 satin stainless is 8700 9 630. Matte black substitutes BLK for the numeric code, so a 12 inch black is 8700 2 BLK. Get the length and the finish code right and the substrate takes care of itself.

How fast can I get the Ives 8700 2 626 delivered?

Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.

Can I return it if it doesn’t work for me?

Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.

Does the Ives 8700 2 626 come with a warranty?

Absolutely. The Ives 8700 2 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.

How do I get technical support or installation help for the Ives 8700 2 626?

You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us

Why buy the Ives 8700 2 626 from ZenSupply?

ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.

Ives 8700 Greenwich Arc Straight Solid Door Pull with 1" Round Design

Write a Review

Ives