Ives 8400 Kick Plate, Four Bev...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$447.44
$302.17
Ives 8400 Kick Plate, Four Beveled Edges, Counter Sunk Holes

Ives 8400 Kick Plate, Four Beveled Edges, Counter Sunk Holes

(No reviews yet) Write a Review

Model: 8400 10B 10x28
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$447.44
$302.17
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Ives 8400 Kick Plate, Four Beveled Edges, Counter Sunk Holes

Ives Architectural Hardware

A full line of premium-quality building hardware and accessories that delivers application flexibility and superior value.

Ives has produced a full line of premium-quality hardware accessories that deliver flexibility and value. The expansive portfolio includes hinges, pivots, flush bolts, strikes, door trim, pulls, protection plates, lock guards and many other hardware accessories.

Professional Door Protection Solution

The Ives 8400 Series kick plate delivers superior door protection with four beveled edges and countersunk mounting holes for professional installations. This 10" height protection plate meets ANSI/BHMA A156.6 for J301 standards and features UL 10C certification for fire-rated applications. Available in aluminum, brass, and stainless steel substrates with various finish options to match existing door hardware.

Professional Features & Benefits

  • Standard Height Configuration: 10" height provides comprehensive lower door protection while maintaining proportional aesthetics for commercial applications.
  • Four Beveled Edges Design: Standard beveled edge construction with countersunk mounting holes ensures professional appearance and secure installation.
  • Multiple Substrate Options: Available in aluminum, brass, and stainless steel substrates with variety of standard finishes to match pull options and existing hardware.
  • ANSI/BHMA Compliance: Meets ANSI/BHMA A156.6 for J301 standards ensuring Grade 1 performance for commercial applications.
  • UL Fire Rating: UL 10C certified protection plates suitable for fire-rated door assemblies and UL-specified applications.
  • Premium Construction: All stainless steel plates feature 300 series stainless steel for long-lasting performance in interior and exterior applications.
  • Standard Mounting Package: Includes 16 per pack #6 x 5/8" oval head screws with mounting hardware that exceeds industry standards.
  • Custom Sizing Available: Protection plates can be ordered in 1/2" increments with custom orders available for specialized applications.

Technical Specifications

  • ANSI/BHMA: Meets ANSI/BHMA A156.6 for J301
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Product Category: Door Trim and Accessories
  • Product Group: Door Trim and Accessories
  • Product Height: 10"
  • Product Model: 8400
  • Product Subgroup: Door Armor and Protection Plates
  • Product Type: Door Protection and Kick Plates
  • Series: 8400
  • Subcategory: Kick Plates

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness and material compatibility for the selected substrate.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door surface, ensuring proper alignment with beveled edges.
  3. Prepare door by drilling required countersunk holes as specified in manufacturer instructions for secure mounting.
  4. Install mounting hardware using provided #6 x 5/8" oval head screws and secure the plate to door per manufacturer torque specifications.
  5. For brass plates on metal doors, apply gasket tape kit around perimeter to reduce tarnishing from electrolytic oxidation.
  6. Test plate installation to verify secure mounting and proper alignment. Refer to manufacturer documentation for complete installation details and finish care instructions.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Ives Quality?

Ives 8400 Series protection plates deliver professional-grade reliability with Grade 1 performance meeting ANSI/BHMA A156.6 standards and UL 10C fire rating certification. The superior construction features 300 series stainless steel substrates and mounting hardware that exceeds industry standards for demanding commercial applications where dependable door protection is essential.

Manufacturer Resources

Ives Full Line Catalog

Product Specs

Series:
8400
Product Group:
Door Trim and Accessories
Subcategory:
Kick Plates
Product Subgroup:
Door Armor and Protection Plates
Product Type:
Door Protection and Kick Plate
ANSI/BHMA:
Meets ANSI/BHMA A156.6 for J301
Commercial/Residential:
Commercial
Product Model:
8400
Product Height:
10"
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Ives 8400 10B 10x28 – Frequently Asked Questions

1) What size Ives 8400 protection plate do I need for a 36 inch door?
Protection plates are sized to the door leaf, not the opening. The trade convention is 2 inches under the door width on a single door and 1 inch under on each leaf of a pair, so a 36 inch single door takes a 34 inch plate and a 36 inch leaf in a pair takes 35 inches. The 8400 covers both: 9 x 34, 10.5 x 34, 12 x 34 and 16 x 34 for the single door, and 8 x 35, 10 x 35, 12 x 35 and 18 x 35 for the pair. Sizes run in 1 and 2 inch increments, so if the door is an odd width you can usually land within an inch of it.
2) Does the Ives 8400 protection plate come with mounting screws?
Screws are included. The standard mounting package is 16 #6 x 5/8 inch oval head screws per pack, sized to the countersunk (B-CS) holes in the plate face. If the standard screws are not right for your door, the 8400 is also offered with adhesive mounting, self-drilling screws, or security screws, so a hollow metal door or a high abuse opening where you do not want the plate removable can be handled at the order stage instead of on site.
3) What is a comparable stainless steel protection plate with beveled edges to the Ives 8400?
The Hager 190S-32D is the closest peer. It is a door protection plate in Hager's 190 Series, finished in satin stainless steel with four beveled edges. The Ives 8400 is built from 300 series stainless steel with four beveled edges and countersunk mounting holes, meets ANSI/BHMA A156.6 for J301, and is UL certified to UL10C for fire-rated door applications. Both give you the same beveled stainless profile on the door face; the ordering difference is that the 8400 is sized in 1-2 inch increments, with sizes running from 3 inches by 44 inches up to 47 inches by 48 inches, so it can be cut to the actual door rather than a fixed catalog size.
4) Can I mount a kick plate without drilling holes in the door?
Adhesive mounting is one of the offered options on the Ives 8400 Series, so the plate can go on without putting fasteners through the door face. That is the route to take on a factory finished or laminate faced door, or where you do not want to break the surface of a door skin. If you would rather fasten it, the standard configuration ships with countersunk holes and 16 #6 x 5/8 inch oval head screws.
5) What is the difference between a mop plate, a kick plate, a stretcher plate and an armor plate?
They are the same part in different heights, and the Ives 8400 Series spans all four. A mop plate is short and sits at the very bottom of the door to take bucket and mop damage: 3 x 44, 4 x 33 and 6 x 36 are in that range. A kick plate takes foot and cart traffic at the bottom of the door and runs roughly 8 to 12 inches: 8 x 34.5, 10 x 35 and 12 x 36. A stretcher plate is a band mounted higher up the door where gurneys and carts strike it, which the 8 and 10 inch sizes also cover. An armor plate runs from the bottom of the door up past the lock and starts around 24 inches: 24 x 34, 30 x 36 and 34 x 36. Pick by what is hitting the door and how high it hits.
6) Does the Ives 8400 meet a spec calling for ANSI/BHMA A156.6 J301?
It does. The 8400 Series is built to meet ANSI/BHMA A156.6 for J301, which is the A156.6 designation covering armor, kick and mop plates, so it answers a hardware schedule that calls out J301 protection plates by number. It also carries UL10C certification for fire rated openings, which is the second line most institutional specs put next to it. The series is classified for commercial use.
7) Will a stainless kick plate hold up on an exterior door?
The Ives 8400 uses a 300 series stainless steel substrate and is rated for interior and exterior use, so an entry door, a loading dock door or a wash down corridor is within what the material is meant for. 300 series stainless is the austenitic family used where corrosion resistance matters, which is why it is the usual choice over a painted or plated plate on an opening that sees weather, salt or regular cleaning chemicals.
8) The drawing calls for an armor plate, not a kick plate - can a Hager 190S cover it?
The Hager 190S-32D is a kick plate: a door protection plate in the 190 Series, satin stainless with four beveled edges, sized for the lower portion of the door. If the opening needs a taller plate, the Ives 8400 covers mop plate, kick plate, stretcher plate and armor plate configurations out of the same 300 series stainless construction, in heights that reach 47 inches by 48 inches. For a straight kick plate at the bottom of the door, both are the same kind of part; for anything above stretcher height, the 8400 is the one whose size range goes there.
9) We already have Hager 190S satin stainless kick plates on some doors - will Ives 8400 plates match on the rest?
Visually they read the same on the door. The Hager 190S-32D is satin stainless steel with four beveled edges, and the Ives 8400 is 300 series stainless steel with four beveled edges and countersunk mounting holes, so the material, the bevel on all four sides and the flush screw heads line up across a mixed fleet. The thing to plan for is width and height: the 8400 is ordered in 1-2 inch increments across sizes from 3 inches by 44 inches to 47 inches by 48 inches, so measure the doors you are adding to and order the plate to the opening rather than assuming the size on the existing doors carries over.
10) Will the screw heads on the Ives 8400 catch carts or mops?
No. The holes are countersunk (B-CS) so the #6 oval head screws seat into the plate face instead of standing proud of it, and all four edges are beveled rather than left square. On a healthcare corridor or a stockroom door where carts run the wall line every day, that is the detail that keeps a plate from being peeled at a corner or catching a wheel.
11) Do I need to specify handing when I order an Ives 8400 protection plate?
Handing does not apply. A protection plate is a flat, symmetrical stainless panel with beveled edges on all four sides and a countersunk hole pattern, so the same plate goes on a left hand or right hand door either way up. What you actually have to get right on the order is the size, since the plate is cut to the door leaf, and the mounting method, standard countersunk holes or adhesive.
12) My doors are an odd width. Can I get an Ives 8400 plate cut to fit?
The 8400 Series is stocked in 1 and 2 inch increments across a wide spread of sizes, from small mop plate sizes like 3 x 44 and 4 x 22 up to full armor plate sizes such as 40 x 48, 46 x 48 and 47 x 48. Between the increments and that range, most non standard leaf widths are covered off the shelf, and sizes outside the standard list can be produced to order through customer service.
13) Is the Hager 190S the same part number as the Ives 8400?
No - they are two manufacturers' plates that do the same job. Ives model 8400 is its own 8400 Series designation and is ordered by size. Hager 190S-32D is a separate part number in Hager's 190 Series, supplied in a satin stainless steel finish with four beveled edges. If a submittal or purchase order calls out one by number, substituting the other is a substitution and needs approval, even though both are stainless door protection plates with beveled edges.
How fast can I get the Ives 8400 10B 10x28 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ives 8400 10B 10x28 come with a warranty?
Absolutely. The Ives 8400 10B 10x28 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ives 8400 10B 10x28?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ives 8400 10B 10x28 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!