Klein Tools 90-Tooth Ratchetin...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$89.27
Klein Tools 90-Tooth Ratcheting Combo Wrench Set, 8-Piece

Klein Tools 90-Tooth Ratcheting Combo Wrench Set, 8-Piece

(No reviews yet) Write a Review

Model: 69408MG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$89.27
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
90-Tooth Ratcheting Combo Wrench Set, SAE, 8-Piece

  • Warnings

    • Do NOT extend handle length.
    • Do NOT push or hammer wrench.
    • Always wear approved eye protection.
    • Never use on or near live electrical circuits.

  • Features

    • Cold-forged steel with precision machining finish and black phosphate coating for long-lasting rust prevention
    • Ergonomic handle with recessed areas for your thumb or index finger to rest naturally for comfortable, all day use
    • Premium foam roll pouch with internal flap to prevent tools from falling out and hang holes for open storage
    • Lasered "on" or "off" markings to quickly identify the fastening and loosening direction of the tool
    • Color Coded
    • 8-Piece SAE Wrench Set comes with 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4-Inch ratcheting combination wrenches
    • Color-coded size markings to easily identify each tool
    • 90-tooth ratchet mechanism to minimize the return angle for maximum access with 20-Percent improvement on 72-tooth ratchets


69408G - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Department:
Electrical
Overall Width:
1" (2.5 cm)
Product Type:
Ratcheting Wrench Set
Product Finish:
Black Nickel Zinc
Product Details:
Ratcheting Wrench Set
Offset Angle:
15°
Product Subgroup:
Screwdrivers & Drivers
Number Of Pieces:
9
Number Of Teeth:
90
Case Included:
Yes
Number Of Points:
12
Overall Height:
10" (25.4 cm)
Product Width:
6.0000 in
Head Type:
Ratcheting
Product Height:
1.0000 in
Reversible:
Yes
Handle Type:
Steel
Product Group:
Hand Tools
End Type:
Open
Product Depth:
10.5000 in
Overall Length:
12" (30.5 cm)

Klein Tools 69408MG – Frequently Asked Questions

1) What wrench sizes come in the Klein Tools 69408G 8-piece SAE ratcheting wrench set?
The SAE set (69408G) covers 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4 inch ratcheting combination wrenches. That range handles most standard fastener work in an electrical or MRO kit. If you work in millimeters instead, order the metric version, 69408MG.
2) Are Klein 90-tooth ratcheting wrenches insulated for live electrical work?
No. These are cold-forged steel wrenches with a steel handle and no insulation, and Klein's own warning is never to use them on or near live electrical circuits. For energized work you need wrenches rated and marked as insulated hand tools. De-energize and verify before using these.
3) Do the ratcheting ends on these Klein wrenches reverse, or do I have to flip the wrench over?
They reverse. The ratchet is reversible, and each wrench is laser marked "on" and "off" so you can see at a glance which direction it is set to drive without flipping it over to test.
4) Can I use a cheater bar on these ratcheting wrenches to break a stuck bolt?
No. Klein specifically warns not to extend the handle length and not to push or hammer on the wrench. The 90-tooth ratchet mechanism is the weak point under shock or extended leverage. Use a breaker bar and socket to crack the fastener loose, then switch to the ratcheting wrench to run it out. Eye protection either way.
5) Is the open end on these a plain wrench or does it ratchet too?
Combination wrenches: one ratcheting box end and one fixed open end per wrench. The open end is there for flare nuts, thin clearances, and fasteners you cannot get a box over; the ratcheting end does the fast work.
6) Does the Klein 69408 wrench set come with a case or roll?
Yes, storage is included: a foam roll pouch with an internal flap that keeps the wrenches from sliding out when the roll is carried, plus hang holes if you keep it on a board or in a van rack.
7) How well do these hold up in a damp or outdoor service truck?
The wrenches are cold-forged steel with a black phosphate coating for rust prevention, finished in black nickel zinc. That is a corrosion finish rather than a plated shine, so it holds up to handling and damp storage, though like any steel wrench they should be wiped dry after wet work.
8) How do I tell the wrenches apart quickly when several are out of the roll?
Each wrench carries color-coded size markings, so you can grab the right one off a bench or out of the roll without reading stamped numbers in poor light. Handy when you are cycling through 5/16 up to 3/4 on the same job.
How fast can I get the Klein Tools 69408MG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 69408MG come with a warranty?
Absolutely. The Klein Tools 69408MG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 69408MG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 69408MG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!