You may also like
Ratcheting Box Wrench Set, 5-Piece
68221 - spec sheet
Warnings
- Never use on or near live electrical circuits.
- Do NOT push or hammer wrench.
- Always wear approved eye protection.
- Do NOT extend handle length.
Features
- Chrome-plated finish for rust resistance
- Reverse ratcheting action by simply turning wrench over
- Both ends are offset 25-degree for more convenient use in confined spaces and on long studs
- Made in USA
- Five ratcheting box wrenches packed in a vinyl 8-1/2-Inch x 10-Inch (21.6 x 25.4 cm) H roll-up pouch with individual pockets
- Laminated construction for greater strength
- Both Ends are Offset 25° for More Convenient Use in Confined Spaces and on Long Studs
- Wrenches flip over to reverse ratchet
- Set includes five double-hex wrenches with a different size at each end
68221 - spec sheet
Manufacturer Resources
Spec Sheet
Product Specs
- Accessories:
- TT1, TT2
- Item Depth:
- 12.7500 in
- Item Height:
- 0.5000 in
- Item Weight:
- 1.4500 lbs
- Item Width:
- 9.2500 in
- Number Of Pieces:
- 7
- Department:
- Electrical
- Product Group:
- Hand Tools
- Product Subgroup:
- Hammers & Wrenches
- Product Type:
- Ratcheting Box Wrenches - Standard
- Product Details:
- Ratcheting Box Wrenches - Standard
- Product Weight:
- 2.7 lb (1.2 kg)
- Country of Origin:
- United States
- Product Height:
- 0.5 in
- Product Width:
- 9.25 in
- Product Depth:
- 12.75 in
Klein Tools 68221 – Frequently Asked Questions
1) How does the Klein 68221 wrench ratchet in both directions?
There is no reversing lever. The Klein Tools 68221 box wrenches ratchet one way as held, and you flip the wrench over to reverse the action. Fewer moving parts to fail, but it does mean you need enough clearance to turn the tool over in the space you're working in.
2) Will these ratcheting box wrenches reach a nut recessed down in a panel or on a long stud?
Both ends of each wrench are offset 25 degrees, which lifts the handle clear of the surface and lets the box engage down over a long stud or a bolt sitting below the face of a panel. That offset is the main reason electricians keep this set for strut, panel and enclosure work in tight spots.
3) Can I use these Klein box wrenches on energized electrical equipment?
No. The 68221 wrenches are chrome-plated steel with no insulation, and Klein's own instruction is never to use them on or near live circuits. De-energize and verify before you put a wrench on a lug or bus. If you need to work energized, you need a 1000V insulated tool, not this set.
4) How many wrench sizes do you actually get in the Klein 68221 5-piece set?
Ten openings across five wrenches. Each of the five is a double-hex box wrench with a different size on each end, so one tool covers two fasteners.
5) Are these wrenches strong enough to break loose a seized nut, and can I put a pipe on the handle?
The wrenches use laminated construction for added strength, but Klein is explicit: do not extend the handle length, and do not push or hammer on the wrench. For a frozen fastener use a breaker bar or impact-rated socket instead. Eye protection on either way.
6) What is the exact Klein part number to order this ratcheting box wrench set?
Order Klein Tools 68221. That is the manufacturer part number for the 5-piece ratcheting box wrench set in the roll-up pouch.
7) Does the Klein 68221 set come with a case or pouch?
It ships in a vinyl roll-up pouch, 8-1/2 x 10 inches, with an individual pocket for each of the five wrenches. Good for a truck bin or a tool bag where a hard case wastes space.
8) Will the chrome finish hold up in a damp mechanical room or outdoor service work?
The chrome plating is there for rust resistance, which is what you want for tools that live in a van or get used in damp vaults and crawlspaces. Wipe them down and roll them back into the pouch rather than leaving them loose and wet.
9) Is the Klein 68221 wrench set made in the USA?
Yes, the 68221 ratcheting box wrenches are made in the USA, which matters on public and institutional jobs carrying domestic-sourcing requirements.
10) Are there accessory tools that go with the Klein 68221 wrench set?
Klein lists TT1 and TT2 as the accessories associated with the 68221 set. If you're standardizing a crew's kit, those are the companion items to pull alongside the wrenches.
How fast can I get the Klein Tools 68221 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 68221 come with a warranty?
Absolutely. The Klein Tools 68221 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 68221?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 68221 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.