You may also like
3/32" Cabinet Tip Mini Screwdriver 2"
Features
- Tip-Ident® quickly identifies the screwdriver type and tip orientation.
- Precision-machined tip for exact fit.
- Premium chrome-plated for smooth feel and corrosion resistance.
- Meets or exceeds applicable ASME / ANSI specifications.
- Special heat-treated shafts.
- Precision formed tip provides an exact fit for small screw applications.
- Internal flanges inside handle provide solid, twist-resistant blade anchor.
- Cushion-Grip handle for greater torque and comfort.
Manufacturer Resources
Product Specs
- Product Subgroup:
- Screwdrivers & Drivers
- Department:
- Electrical
- Product Type:
- Screwdriver
- Product Group:
- Hand Tools
Klein Tools 607-2 – Frequently Asked Questions
1) What tip sizes does the Klein Tools mini cabinet tip screwdriver come in?
Two tip widths: 3/32 inch (Klein 607-2) and 1/8 inch (Klein 608-2). Both are cabinet tip slotted drivers with a 2 inch blade. Cabinet tip means the blade sides run parallel to the tip width instead of flaring out, so it drops into a recessed or counterbored slotted screw without binding on the sides of the hole.
2) Will a cabinet tip screwdriver work for terminal screws inside a panel or device box?
That is what the shape is for. A keystone (flared) tip can catch on the edge of a deep terminal well, where the parallel-sided cabinet tip on the Klein 607-2 and 608-2 seats fully in the slot. The 2 inch blade keeps it short enough to work in a crowded box or behind a device plate. Pick 3/32 inch for the smallest terminal screws and 1/8 inch for standard device terminals.
3) Is this mini screwdriver rated to any hand tool standard?
Klein states these mini cabinet tip drivers meet or exceed applicable ASME/ANSI specifications. That is the dimensional and performance standard institutional and MRO buyers usually reference when standardizing hand tools across a facility.
4) Will the blade twist loose in the handle under torque?
The blade is anchored by internal flanges molded inside the handle, which resist the blade spinning in the grip. The shaft is separately heat treated, and the Cushion-Grip handle is shaped for more torque by hand. On a 3/32 or 1/8 inch tip this small, the practical limit is the screw slot, not the tool.
5) Should I buy the 3/32 inch or the 1/8 inch Klein mini screwdriver?
Match the blade to the slot width, not the screw head diameter. The 3/32 inch (607-2) suits the smallest slotted screws, such as instrument, thermostat, and low-voltage device screws. The 1/8 inch (608-2) covers common small machine and terminal screws. If you are buying one of each, they are separate part numbers, not a set.
6) Is this the right driver for Phillips or square drive screws?
No. Klein's 607-2 and 608-2 are slotted cabinet tip drivers only, sized 3/32 and 1/8 inch across the blade. For cross-recess or square-recess screws you need a Phillips or Robertson tip driver instead.
7) How do I tell the 3/32 and 1/8 inch drivers apart once they are in the pouch?
Both carry Klein's Tip-Ident marking on the handle end, which shows the screwdriver type and the orientation of the tip so you can grab the right one and know which way the blade sits before it reaches the screw.
8) Is the finish on these mini screwdrivers OK for a damp service truck or maintenance cart?
The shafts are premium chrome plated, which Klein specifies for corrosion resistance as well as a smooth feel in the hand. That holds up better on a truck or shop cart than a bare steel blade.
How fast can I get the Klein Tools 607-2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 607-2 come with a warranty?
Absolutely. The Klein Tools 607-2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 607-2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 607-2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.