Klein Tools Lockback Knife, 2-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$55.13
Klein Tools Lockback Knife, 2-5/8-Inch Hawkbill Blade, Black Handle

Klein Tools Lockback Knife, 2-5/8-Inch Hawkbill Blade, Black Handle

(No reviews yet) Write a Review

Model: 44005R

In Stock (leaves warehouse same day if ordered before 3pm ET)

$55.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Hawkbill Lockback Knife with Clip

  • Warnings

    • Always wear approved eye protection.
    • Check local law on the legality of selling, carrying, or possessing this knife.
    • Never use on or near live electrical circuits.

  • Features

    • Low-carry Pocket/Belt Clip
    • Made in USA
    • Premium quality blade offers superior edge holding
    • Reversible thumb stud provides easy one-handed opening, and lockback secures knife open
    • Lanyard hole for tethering
    • AUS8 stainless steel hawkbill blade
    • Convenient low-carry pocket/belt clip
    • Impact-resistant nylon resin handle with rubber insert


44005C - spec sheet

Product Specs

Department:
Electrical
Product Type:
Pocket Knife
Overall Width:
0.813" (2.1 cm)
Blade Material:
AUS 8 Stainless Steel
Handle Color:
Black
Product Details:
Compact
Lock Style:
Lockback
Product Subgroup:
Knives & Blades
Blade Thickness:
0.1" (2.5 mm)
Blade Length:
2.625" (6.7 cm)
Overall Height:
Open 1.5" (3.8 cm); Closed 1.906" (4.8 cm)
Product Group:
Hand Tools
Length Closed:
4.203" (10.7 cm)
Sharpenable:
Yes
Handle Material:
Nylon Resin
Overall Length:
6.75" (17.2 cm)
Product Material:
Stainless Steel/nylon Resin

Klein Tools 44005R – Frequently Asked Questions

1) What's the difference between Klein 44005, 44005C, 44005R and 44005RC?
Same hawkbill lockback knife, four build options. The plain 44005 is the pointed-tip version with no pocket clip. 44005C adds the low-carry pocket/belt clip. 44005R swaps the point for a rounded tip, which is what many crews require where a sharp point risks nicking cable insulation or puncturing a hand. 44005RC is the rounded tip with the clip. Pick the tip style first, then decide whether you want the clip.
2) Is the Klein 44005 hawkbill knife safe to use on live electrical circuits?
No. The 44005 hawkbill lockback is not insulated and Klein's own warning states never use it on or near live electrical circuits. De-energize and verify dead before cutting. Wear approved eye protection as well. It is a cable and insulation cutting knife, not a live-work tool.
3) Will the Klein hawkbill knife open one-handed if I'm left-handed or up on a ladder?
Yes. The thumb stud is reversible, so it can be set up for either hand, and the lockback holds the blade open once deployed. There's also a lanyard hole if you want to tether it working at height.
4) Why choose a hawkbill blade instead of a straight-edge utility knife for stripping cable?
The hawkbill's inward curve pulls material into the belly of the blade, so it grips and cuts jacket, sheathing, rope and shrink wrap on a pull stroke instead of skating off a round cable. A straight blade or a snap-off utility knife works better for flat scoring and drywall. For a lineman or electrician skinning cable, the hawkbill is the shape you want, and the rounded-tip 44005R avoids digging the point into conductors.
5) Can the Klein 44005 blade be resharpened, or is it a throwaway?
It sharpens. The blade is AUS 8 stainless steel and is listed as sharpenable, so a crew can maintain the edge on a stone or rod rather than replacing the knife. AUS 8 is a mid-hardness stainless, easy to bring back to an edge while holding up to damp job-site conditions.
6) How does the handle hold up to being dropped or used with gloves?
The handle is impact-resistant nylon resin in black with a rubber insert, so it takes drops without cracking and gives some grip with wet or gloved hands.
7) Can I hand these out to a whole crew or issue them to techs in any state?
Before standardizing on the 44005 across a crew or shipping to multiple jurisdictions, check local law on selling, carrying and possessing a locking folder, which Klein flags directly for this knife. Some municipalities restrict locking or one-hand-opening blades, and the rounded-tip 44005R or 44005RC is often the version that clears facility and site rules.
8) Is the Klein 44005 hawkbill knife made in the USA?
Yes, the hawkbill lockback is made in the USA, which matters if you are buying to a domestic-preference or Buy American purchasing policy.
How fast can I get the Klein Tools 44005R delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 44005R come with a warranty?
Absolutely. The Klein Tools 44005R is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 44005R?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 44005R from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!