KTO Resurgence Knife, Drop Point Blade, Moss Green Handle
OGK000GNT - spec sheet
Features
- Lanyard hole for drop prevention
- Choil on blade for easy sharpening
- Reversible deep carry pocket clip for Ambidextrous hold
- Lanyard Hole, Reversible Pocket Clip, Amidextrous Lock, Ergonomic Jipping
- Large thumb hole for multiple quick action opening techniques
- Ambidextrous crossbar lock for opening and closing
- Ergonomic jimping on top and bottom for excellent grip
- Drop Point blade Pocket Knife is made of D2 tool steel for a durable and long lasting edge
OGK000GNT - spec sheet
Manufacturer Resources
Product Specs
- Department:
- Electrical
- Blade Material:
- D2 Steel
- Overall Width:
- 1.32" (3.3 cm)
- Product Type:
- Pocket Knife
- Product Details:
- Manual Assist Pocket Knife
- Blade Finish:
- Natural Bright/ Polished Finish
- Lock Style:
- Crossbar Lock
- Product Subgroup:
- Knives & Blades
- Country Of Origin:
- Taiwan
- Product Weight:
- 0.1760 lbs
- Product Material:
- 416 Stainless Steel
- Blade Grind:
- Flat Grind
- Blade Length:
- 3" (7.6 cm)
- Open Style:
- Manual
- Handle Length:
- 4.19" (10.6 cm)
- Overall Height:
- 0.68" (1.7 cm)
- Product Width:
- 4.1900 in
- Retractable Blade:
- No
- Product Height:
- 1.4800 in
- Blade Type:
- Drop Point
- Handle Type:
- Slim
- Product Group:
- Hand Tools
- Length Closed:
- 4.19" (10.6 cm)
- Handle Width:
- 0.68" (1.7 cm)
- Sharpenable:
- Yes
- Handle Material:
- Glass-Filled Nylon
- Handle Thickness:
- 0.65" (1.7 cm)
- Product Depth:
- 7.1300 in
- Overall Length:
- 7.13" (18.1 cm)
- Pocket Clip:
- Yes
- Cutting Edge:
- Plain Edge
Klein Tools OGK000BKT – Frequently Asked Questions
1) Is the Klein KTO Resurgence pocket knife blade length legal for job sites with a 3 inch blade limit?
The KTO Resurgence carries a 3 inch (7.6 cm) drop point blade, so it sits right at the common 3 inch cutoff many facilities and municipalities use. Overall length open is 7.13 inches and it closes down to 4.19 inches. Measure policies vary on whether the limit is measured to the handle or to the sharpened edge, so check the wording of your site rule against the 3 inch figure.
2) Can a left-handed electrician use the Klein OGK000 Resurgence knife comfortably?
Yes. The Resurgence uses an ambidextrous crossbar lock for both opening and closing, and the deep carry pocket clip is reversible, so a lefty can move it to the other side of the handle. The large thumb hole in the blade opens from either hand.
3) Is the KTO Resurgence a spring-assisted or automatic knife?
It's a manual opener, not automatic and not spring assisted. You open it by hand using the large thumb hole, and the blade does not retract into the handle. That matters where employers or jurisdictions restrict automatic knives.
4) Will D2 tool steel hold up cutting Romex and cable jacket all day?
D2 is a high-carbon tool steel, and the Resurgence uses a flat grind with a plain edge, which is what you want for slicing jacket and insulation rather than sawing at it. D2 holds an edge longer than typical stainless but it is less corrosion resistant, so wipe it down if it gets wet. The blade is sharpenable and has a choil at the heel so you can run a stone all the way to the base of the edge.
5) Will the Resurgence knife stay put if I'm working off a lift or a ladder?
There's a lanyard hole in the handle for drop prevention, so you can tether it when you're working at height, and the deep carry clip keeps the knife low in the pocket instead of riding up. The handle has jimping top and bottom for grip with gloves on.
6) Is a drop point blade the right choice for electrical work, or should I get a sheepsfoot?
A drop point with a plain edge, like the Resurgence, gives you a usable tip for picking at jacket and a long belly for slicing, which suits general cable and box work. If your concern is never nicking a conductor or puncturing something behind the cut, a blunt-tip sheepsfoot or hawkbill is the safer profile. The Resurgence is the general-purpose pick, not the specialist cable stripper.
7) How heavy is the Klein Resurgence knife for everyday pocket carry?
0.176 lbs, roughly 2.8 ounces, with a slim glass-filled nylon handle 0.65 inch thick and 0.68 inch wide. Closed length is 4.19 inches. That is a light, flat carry compared with steel-framed folders, which is the point of the nylon scales.
8) What handle colors does the Klein KTO Resurgence drop point knife come in?
Three: Black (OGK000BKT), Moss Green (OGK000GNT), and Sand (OGK000TNT). Blade and hardware are the same across all three, so pick by color if you are color-coding tools across a crew.
9) Where is the Klein OGK000 Resurgence knife made?
Taiwan. The blade is D2 tool steel, the handle is glass-filled nylon, and the hardware is 416 stainless steel.
How fast can I get the Klein Tools OGK000BKT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools OGK000BKT come with a warranty?
Absolutely. The Klein Tools OGK000BKT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools OGK000BKT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools OGK000BKT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.