Pocket Knife, Black, Drop Point Blade
44220 - spec sheet
Features
- Deep Pocket Clip
- Lanyard hole allows knife to be tethered safely to prevent loss, or injury from dropped knife
- Rubber finger grip for comfort and long-wear
- Liner lock secures blade in open position
- Blade is 3-1/2-Inch long
- Rugged black aluminum handle provides corrosion resistance
- Black, fine-edge drop point blade is made of 440A stainless steel for superior edge retention and ease of sharpening
- Dual thumb studs for ambidextrous, one-handed opening
- Deep pocket/low-carry pocket clip allows the knife to fit completely and securely in a pocket
Warnings
- Never use on or near live electrical circuits.
- Check local law on the legality of selling, carrying, or possessing this knife.
- Always wear approved eye protection.
44220 - spec sheet
Manufacturer Resources
Product Specs
- Blade Length:
- 3.5" (8.9 cm)
- Blade Material:
- 440A Stainless Steel
- Blade Type:
- Drop Point
- Handle Color:
- Black
- Handle Material:
- Anodized Aluminum
- Length Closed:
- 4.703" (12 cm)
- Lock Style:
- Liner lock
- Overall Length:
- 8.203" (20.8 cm)
- Department:
- Electrical
- Product Group:
- Hand Tools
- Product Subgroup:
- Knives & Blades
- Product Height:
- 1.0000 in
- Product Weight:
- 0.3130 lbs
- Product Width:
- 1.0000 in
- Product Depth:
- 8.2500 in
- Product Type:
- Pocket Knife
Klein Tools 44220 – Frequently Asked Questions
1) Can the Klein Tools 44220 pocket knife be used on live electrical circuits?
No. The 44220 is not insulated and Klein warns against using it on or near live circuits. The handle is anodized aluminum, which is conductive. For any work where the conductor may be energized, de-energize and verify first, or use an insulated-handle cable or lineman's knife rated for the task.
2) How long is the Klein 44220 knife open and closed, and will it ride in a pocket without bulk?
Closed it measures 4.703 inches, opens to 8.203 inches overall, with a 3.5 inch blade. It weighs 0.313 lbs. The deep pocket, low carry clip drops the knife fully into the pocket so only the clip shows.
3) Is a 3-1/2 inch blade legal to carry on the job?
Blade length limits and locking-blade rules vary by state and city, and the 44220 carries a 3.5 inch blade with a liner lock. Klein's own instruction is to check local law on selling, carrying, or possessing the knife. Crews working across jurisdictions often standardize on a shorter blade for that reason.
4) Can the Klein 44220 be opened one-handed by a left-handed tech?
Yes. Dual thumb studs make it ambidextrous for one-handed opening, and a liner lock holds the blade open once deployed. There is also a lanyard hole so the knife can be tethered when working off a ladder or in a lift.
5) Is a drop point blade the right shape for stripping cable and cutting jacket?
A drop point like the 44220 has a strong tip and a long curved belly, so it handles general cutting, scoring jacket, and opening boxes well. For skinning long runs of jacket, many electricians prefer a hawkbill or sheepsfoot shape because the curved or blunt edge pulls through insulation without digging into the conductor. The 44220 is the general-purpose carry choice rather than a dedicated cable skinner.
6) How does 440A stainless hold an edge, and is it easy to sharpen in the field?
The 44220 uses 440A stainless, which Klein specifies for edge retention and ease of sharpening. In practice that means you can touch it up on a pocket stone rather than needing diamond abrasives, and the stainless composition plus the black coating resists the corrosion you get from sweat and damp conditions. The anodized aluminum handle resists corrosion as well.
7) Is the Klein 44220 grippy enough with gloves or wet hands?
The handle is black anodized aluminum with a rubber finger grip insert for comfort over long use. Aluminum alone would be slick, so the rubber section is what gives you purchase with damp or gloved hands.
8) What is the exact Klein part number to order for the black drop point pocket knife?
Order Klein Tools 44220. That is the single model, black handle with a black fine-edge drop point blade, and there are no size or finish variations to specify.
How fast can I get the Klein Tools 44220 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 44220 come with a warranty?
Absolutely. The Klein Tools 44220 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 44220?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 44220 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.