Klein Tools

Multi-Bit Screwdriver / Tap Tool, 14-Piece Warnings Do NOT use to pry or chisel. NOT insulated. Will NOT protect against electrical shock. Always wear approved eye protection. Features Multi-bit...

1-5/16-Inch Standard Bull Pin Warnings OSHA 1926.301 (c) specifically states: ''Impact tools, such as drift pins, wedges and chisels, shall be kept free of mushroomed heads.'' Always wear approved...

Spud Wrench, 1-1/8-Inch Nominal Opening for Regular Nut Warnings Do NOT extend handle length. Do NOT push or hammer wrench. Always wear approved eye protection. Features Made in USA Continuous...

Replacement Bit, Tamperproof TORX® #7 and #8 Features TORX® is a registered trademark of Acument Intellectual Properties, LLC Contains two (2) bits with TT7 and TT8 TORX® tips Fits all Klein Tools...

Bi-Metal Blades, 24 TPI, 12-Inch, 100-Pack Warnings Always wear approved eye protection. Never use on or near live electrical circuits. Features Reclosable, heavy-vinyl, seal-tight pouch of ten...

Chicago® Grip for Weatherproof Wire Note Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of...

Klein Tools Screwdriver Bits 2-Piece Set #2 Phillips 1/4-Inch Slotted Precision-Machined ReplacementProfessional-Grade Replacement Bits for Multi-Driver ToolsThe Klein Tools Screwdriver Bits 2-Piece...

Multi-Bit Screwdriver, Tamperproof, 15-Piece Warnings NOT insulated. WILL NOT protect against electrical shock. Do NOT use to pry or chisel. Always wear approved eye protection...

Diagonal Cutting Pliers, Insulated, High Leverage, 8-Inch Warnings Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of...

Li-Ion Battery Warnings See instruction manual for additional warnings Do not expose to rain, moisture, or snow Keep conductive materials away from battery terminals when storing or in transport Do...

Wire Stripper/Cutter for 8-16 AWG Stranded Wire Warnings Always wear approved eye protection. NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against...

Bent Trimmer, Knife Edge, Blue Coated, 11-1/2-Inch Features Scissors are proudly made in the USA Precision ground, chrome over nickel blades on strong shears Resists corrosion and rust Heavy duty...

Screwdriver Replacement Bit Holder 2-Piece Features Bit holders work with all Klein Tools 10-in-1, 11-in-1 and 10-Fold Screwdrivers Warnings Do NOT use to pry or chisel. Always wear approved eye...

Parallel Jaw Grip, 0.7 to 1.3-Inch HDPE Wire Warnings Do not exceed rated capacity. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Always match proper size and...

1-1/16-Inch Standard Bull Pin, 15-Inch Features Standard design offers greater initial economy, but no added protection against mushrooming Heat-treated for strength Made in USA Black finish for...

Electrician's Scissors, 5-1/4-Inch Warnings Always wear approved eye protection. Never use on or near live electrical circuits. Features Made in USA Screw hinge permits adjustment Scraper,...

Hole Saw Arbor with Adapter, 3/8-Inch Features See 31906 Arbor with Pins for large hole saws Arbor adapter included for use with hole saws 1-3/8-Inch (35 mm) and larger 118 degree split point pilot...

Grip for Weatherproof Wire 0.74-Inch Capacity Note Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable Features Made in...

3-Step Drill Bit, Double-Fluted, 7/8-Inch to 1-3/8-Inch Features TiN Coating, Impact Shaft, Dual Spiral Fluting Step Drill Bit has 2 spiral flutes to remove chips and help pull the bit through...

Multi-Bit Screwdriver, 4-in-1, Ph Bit #1, #2, Sl Bits 3/16-Inch, 1/4-Inch, 7-Inch Warnings NOT insulated. Will NOT protect against electrical shock. Do NOT use to pry or chisel. Always wear approved...