You may also like
Klein Tools 1628-40 Chicago® Grip for Conductors 25K-Pound Load
Model: KLN-1628-40
Chicago® Grip for Conductors 25K-Pound Load
Features
Manufactured from drop-forged, heat-treated steel for excellent durability
Made in USA
These grips are special order only, please allow 30 days...
Klein Tools
$2,708.51
$2,658.51
Klein Tools 1628-40VR Chicago® Grip - Dual Conductor Trans
Model: KLN-1628-40VR
Chicago® Grip - Dual Conductor Trans
Features
Supplied with spring and locking loop handles, allows jaws to be held in open position for easier placement on cable
Specially milled jaws for the...
Klein Tools
$3,353.41
$3,303.41
Klein Tools 1628-16P Chicago® Grip for Large Diameter Conductors
Model: KLN-1628-16P
Chicago® Grip for Large Diameter Conductors
Features
These non-returnable grips are special order only. Please allow 30 days for delivery.
Orders must specify exact outside diameter of cables,...
Klein Tools
$1,583.30
$1,533.30
Klein Tools 1678-30 Chicago® Grip - for Aluminum Conductors
Model: KLN-1678-30
Chicago® Grip - for Aluminum Conductors
Features
Lightweight grips designed for use on aluminum conductors in distribution work.
Supplied with spring and locking loop handles, allowing jaws to be...
Klein Tools
$612.07
$562.07
Klein Tools 1628-16AT Chicago® Grip Bell-System Type H Grip
Model: KLN-1628-16AT
Chicago® Grip Bell-System Type H Grip
Features
Outside diameter of support wire includes thickness of polyethylene coating
H" Strand Puller -- Equipped with a Chain, Toggle and Shackle
Made in...
Klein Tools
$1,790.59
$1,740.59
Chicago® Grip for Conductors 20K-Pound Load
1628-30 - spec sheet
Features
- These grips are special order only, please allow 30 days for delivery, not returnable -- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code
- Made in USA
- These grips are special order only, please allow 30 days for delivery, not returnable
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Round jaws are shaped to provide maximum contact with the cable, virtually eliminating conductor damage
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
1628-30 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.83" to 1.26" (21.08 to 32 mm)
- Cable Type:
- ACSR, AAC
- Depth:
- 16.2000 in
- Height:
- 2.7000 in
- Hot Latch:
- No
- Locking Handle:
- Yes
- Maximum Safe Load:
- 20,000 lb (9072 kg)
- Spring:
- No
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 24.3000 lbs
- Width:
- 8.7750 in