You may also like
Klein Tools 1628-50 Grip for Large Diameter Conductors
Model: KLN-1628-50
Grip for Large Diameter Conductors
Warnings
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Grips are to be used for temporary installation, not for permanent...
Klein Tools
$2,875.23
$2,825.23
Klein Tools 1628-40VR Chicago® Grip - Dual Conductor Trans
Model: KLN-1628-40VR
Chicago® Grip - Dual Conductor Trans
Features
Supplied with spring and locking loop handles, allows jaws to be held in open position for easier placement on cable
Specially milled jaws for the...
Klein Tools
$3,353.41
$3,303.41
Klein Tools 1628-40 Chicago® Grip for Conductors 25K-Pound Load
Model: KLN-1628-40
Chicago® Grip for Conductors 25K-Pound Load
Features
Manufactured from drop-forged, heat-treated steel for excellent durability
Made in USA
These grips are special order only, please allow 30 days...
Klein Tools
$2,708.51
$2,658.51
Klein Tools 1628-30 Chicago® Grip for Conductors 20K-Pound Load
Model: KLN-1628-30
Chicago® Grip for Conductors 20K-Pound Load
Features
These grips are special order only, please allow 30 days for delivery, not returnable -- Orders must specify exact outside diameter of cables,...
Klein Tools
$2,341.73
$2,291.73
Klein Tools 1628-16AT Chicago® Grip Bell-System Type H Grip
Model: KLN-1628-16AT
Chicago® Grip Bell-System Type H Grip
Features
Outside diameter of support wire includes thickness of polyethylene coating
H" Strand Puller -- Equipped with a Chain, Toggle and Shackle
Made in...
Klein Tools
$1,790.59
$1,740.59
Chicago® Grip for Large Diameter Conductors
1628-16P - spec sheet
Features
- These non-returnable grips are special order only. Please allow 30 days for delivery.
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code
- Designed for larger diameter ACSR, AAC and copper cable
- Made in USA
- Round jaws provide maximum contact with the cable minimizing deformation
Warnings
- Always match proper size and type of grip to application.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Do not exceed rated capacity.
- Grips are to be used for temporary installation, not for permanent anchorage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
1628-16P - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.31" to 0.89" (7.87 to 22.6 mm)
- Cable Type:
- ACSR, AAC, Copper
- Depth:
- 12.3750 in
- Height:
- 1.8000 in
- Hot Latch:
- No
- Jaw Type:
- Round
- Locking Handle:
- No
- Maximum Safe Load:
- 15,000 lb (6803 kg)
- Spring:
- No
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 13.7250 lbs
- Width:
- 6.3000 in