You may also like
Klein Tools 1628-16P Chicago® Grip for Large Diameter Conductors
Model: KLN-1628-16P
Chicago® Grip for Large Diameter Conductors
Features
These non-returnable grips are special order only. Please allow 30 days for delivery.
Orders must specify exact outside diameter of cables,...
Klein Tools
$1,583.30
$1,533.30
Klein Tools 1628-40VR Chicago® Grip - Dual Conductor Trans
Model: KLN-1628-40VR
Chicago® Grip - Dual Conductor Trans
Features
Supplied with spring and locking loop handles, allows jaws to be held in open position for easier placement on cable
Specially milled jaws for the...
Klein Tools
$3,353.41
$3,303.41
Klein Tools 1628-40 Chicago® Grip for Conductors 25K-Pound Load
Model: KLN-1628-40
Chicago® Grip for Conductors 25K-Pound Load
Features
Manufactured from drop-forged, heat-treated steel for excellent durability
Made in USA
These grips are special order only, please allow 30 days...
Klein Tools
$2,708.51
$2,658.51
Klein Tools 1628-30 Chicago® Grip for Conductors 20K-Pound Load
Model: KLN-1628-30
Chicago® Grip for Conductors 20K-Pound Load
Features
These grips are special order only, please allow 30 days for delivery, not returnable -- Orders must specify exact outside diameter of cables,...
Klein Tools
$2,341.73
$2,291.73
Klein Tools 1678-50 Chicago® Grip for Aluminum Conductors
Model: KLN-1678-50
Chicago® Grip for Aluminum Conductors
Features
Lightweight grips designed for use on aluminum conductors in distribution work.
Round jaws shaped to provide maximum contact with circumference of...
Klein Tools
$680.86
$630.86
Grip for Large Diameter Conductors
1628-50 - spec sheet
Warnings
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Always match proper size and type of grip to application.
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Features
- Removable jaw allows for installation of cable
- Jaw must be removed to insert cable
- These Made in USA grips are special order only. Please allow 30 days for delivery. These are not returnable.
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code.
- Round jaws are provide maximum contact with the cable minimizing deformation
- These grips are special order only, please allow 30 days for delivery, not returnable -- Removable floating jaw held in place by a bolt swaged into the lever arm of the grip, secured by a nut and cotter pin -- Jaw must be removed to insert cable
- Removable floating jaw held in place by a bolt swaged into the lever arm of the grip, secured by a nut and cotter pin
1628-50 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.95" to 1.89" (24.13 to 48 mm)
- Cable Type:
- ACSR, ACSS, ACSS-TW, AAC
- Depth:
- 17.5500 in
- Height:
- 2.9250 in
- Hot Latch:
- No
- Jaw Length:
- 10.75" (27.3 cm)
- Locking Handle:
- Yes
- Maximum Safe Load:
- 25,000 lb (11,340 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 29.0250 lbs
- Width:
- 8.5500 in