You may also like
Klein Tools 1628-30 Chicago® Grip for Conductors 20K-Pound Load
Model: KLN-1628-30
Chicago® Grip for Conductors 20K-Pound Load
Features
These grips are special order only, please allow 30 days for delivery, not returnable -- Orders must specify exact outside diameter of cables,...
Klein Tools
$2,341.73
$2,291.73
Klein Tools 1628-16P Chicago® Grip for Large Diameter Conductors
Model: KLN-1628-16P
Chicago® Grip for Large Diameter Conductors
Features
These non-returnable grips are special order only. Please allow 30 days for delivery.
Orders must specify exact outside diameter of cables,...
Klein Tools
$1,583.30
$1,533.30
Klein Tools 1628-40VR Chicago® Grip - Dual Conductor Trans
Model: KLN-1628-40VR
Chicago® Grip - Dual Conductor Trans
Features
Supplied with spring and locking loop handles, allows jaws to be held in open position for easier placement on cable
Specially milled jaws for the...
Klein Tools
$3,353.41
$3,303.41
Klein Tools 1678-40 Chicago® Grip - for Aluminum Conductors
Model: KLN-1678-40
Chicago® Grip - for Aluminum Conductors
Features
Can be supplied with hot-line latch on special order.
Round jaws shaped to provide maximum contact with circumference of cable, less likely to damage...
Klein Tools
$665.67
$615.67
Klein Tools 1628-16AT Chicago® Grip Bell-System Type H Grip
Model: KLN-1628-16AT
Chicago® Grip Bell-System Type H Grip
Features
Outside diameter of support wire includes thickness of polyethylene coating
H" Strand Puller -- Equipped with a Chain, Toggle and Shackle
Made in...
Klein Tools
$1,790.59
$1,740.59
Chicago® Grip for Conductors 25K-Pound Load
1628-40 - spec sheet
Features
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Made in USA
- These grips are special order only, please allow 30 days for delivery, not returnable -- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code.
- Round jaws are shaped to provide maximum contact with the cable, virtually eliminating conductor damage.
- These grips are special order only. Please allow 30 days for delivery. These are not returnable.
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- Always match proper size and type of grip to application.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
1628-40 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 1.2" to 1.58" (30.48 to 40.13 mm)
- Cable Type:
- ACSR, AAC
- Depth:
- 15.8400 in
- Height:
- 3.1500 in
- Hot Latch:
- No
- Locking Handle:
- Yes
- Maximum Safe Load:
- 25,000 lb (11,340 kg)
- Spring:
- No
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 30.2850 lbs
- Width:
- 10.0800 in