You may also like
Klein Tools 1628-16P Chicago® Grip for Large Diameter Conductors
Model: KLN-1628-16P
Chicago® Grip for Large Diameter Conductors
Features
These non-returnable grips are special order only. Please allow 30 days for delivery.
Orders must specify exact outside diameter of cables,...
Klein Tools
$1,583.30
$1,533.30
Klein Tools 1628-40 Chicago® Grip for Conductors 25K-Pound Load
Model: KLN-1628-40
Chicago® Grip for Conductors 25K-Pound Load
Features
Manufactured from drop-forged, heat-treated steel for excellent durability
Made in USA
These grips are special order only, please allow 30 days...
Klein Tools
$2,708.51
$2,658.51
Klein Tools 1628-30 Chicago® Grip for Conductors 20K-Pound Load
Model: KLN-1628-30
Chicago® Grip for Conductors 20K-Pound Load
Features
These grips are special order only, please allow 30 days for delivery, not returnable -- Orders must specify exact outside diameter of cables,...
Klein Tools
$2,341.73
$2,291.73
Klein Tools 1628-16AT Chicago® Grip Bell-System Type H Grip
Model: KLN-1628-16AT
Chicago® Grip Bell-System Type H Grip
Features
Outside diameter of support wire includes thickness of polyethylene coating
H" Strand Puller -- Equipped with a Chain, Toggle and Shackle
Made in...
Klein Tools
$1,790.59
$1,740.59
Klein Tools 1678-50 Chicago® Grip for Aluminum Conductors
Model: KLN-1678-50
Chicago® Grip for Aluminum Conductors
Features
Lightweight grips designed for use on aluminum conductors in distribution work.
Round jaws shaped to provide maximum contact with circumference of...
Klein Tools
$680.86
$630.86
Chicago® Grip - Dual Conductor Trans
1628-40VR - spec sheet
Features
- Supplied with spring and locking loop handles, allows jaws to be held in open position for easier placement on cable
- Specially milled jaws for the Vibration Resistant twin conductor
- Grips maintain temporary tension until the wire or cable can be permanently terminated
- VR2 is a registered trademark of Southwire Company
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code
- TransPowr and T-2 are registered trademarks of General Cable Technologies Corporation.
- Made in USA and designed specifically for VR2® (vibration-resistant) and TransPowr® T-2® dual conductor twisted pair cables
- Machined upper and lower jaws eliminate scoring or damage to second conductor by contouring to second conductor
- Round jaws shaped to provide maximum contact with circumference of cable and prevent cable deformation
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- Always match proper size and type of grip to application.
- Do not exceed rated capacity.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
1628-40VR - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.95" to 1.27" (24.13 to 32.3)
- Cable Type:
- ACSR, AAC
- Depth:
- 15.8400 in
- Height:
- 3.1500 in
- Hot Latch:
- No
- Jaw Type:
- Round
- Locking Handle:
- No
- Maximum Safe Load:
- 15,000 lb (6803 kg)
- Spring:
- No
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 30.2850 lbs
- Width:
- 10.0800 in