Kwikset 488PLLLH Left Hand Palmina Lever Half Dummy

A half dummy is trim only. The Palmina 488 half dummy mounts a single lever on one face of the door with no latch, no spindle through the door, and no moving mechanism. Push or pull is the whole function. Use it on a door held closed by a ball catch, roller catch, or magnetic catch, or on a fixed inactive leaf of a pair. If you need the door to stay shut on its own, you want a passage set instead.

Handing matters. The 488PLLLH is the left hand version, so the lever points to the left as you face the mounting side. Because a dummy lever is fixed and cannot be flipped like a working latch, ordering the wrong hand gets you a lever that points up-hill on the door. Stand on the side the lever will be installed and note which way you want it to sweep down. For the opposite sweep you need the right hand version of the same Palmina lever.

No. A half dummy is one lever for one face. For levers on both faces you either order two, one left hand and one right hand so both sweep down correctly, or buy a set sold as a pair. Emtek sells dummy pairs in its Classic Cortina and Arts and Crafts levers, including the Hammered lever, if you want a single-part solution for a double-sided closet or pantry door.

The Palmina 488PLLLH is a residential lever intended for interior doors that need a push/pull function only. For a commercial opening that carries traffic and needs a graded lockset, the comparable set includes the Corbin Russwin CL3110 Grade 1 vandal resistant passage lever, fire rated, for 1-3/4 inch to 2 inch doors, and the Falcon K101 Grade 1 heavy duty passage lock, fire rated, for 1-3/8 inch to 2-1/4 inch doors. If the same commercial door only needs an inactive lever for appearance, the BEST 9K Series 1DT Grade 1 dummy trim is the heavy duty equivalent of the Palmina's job.

A dummy lever is a pull only, so if the door has to hold shut it is the wrong part. For an interior door that latches but does not lock, passage function levers include the Accentra 5301LN Augusta Grade 2, the Falcon B101 Grade 2 non-handed passage lever, the Hager 2510 Grade 2 passage lever with Withnell design for 1-3/8 inch to 2 inch doors, and the Callan Asheville Grade 3 passage leverset in satin nickel. If the door needs a bath or bedroom lock instead, the Baldwin Estate 5103 is also made in a privacy version on the same 5048 rose.

The Baldwin Estate 5103 left hand half dummy lever with 5048 rose is the closest match in form and function - a handed, single-side half dummy lever meant for a door leaf that needs a pull only. Both are dummy function levers, so neither has a latch or any operating mechanism. The Palmina half dummy is offered in left hand; Baldwin lists the 5103 half dummy in a right hand version as well, so a pair of opposing doors can be handled from the same family.

A half dummy lever is handed, so a left hand Palmina will not read correctly on a right hand door. The Baldwin Estate 5103 half dummy is catalogued in a right hand version with the 5048 rose. Another route is a non-handed dummy trim such as the BEST 9K Series 1DT single dummy trim, a Grade 1 non-keyed heavy duty dummy, or the Grade 2 BEST 7KC Series 1DT single dummy trim.

The Kwikset Palmina 488PLLLH is a residential half dummy that meets ADA/ANSI 4.13.9 requirements. Where a submittal calls for a graded dummy, the set offers the Accentra 455LN Augusta Grade 1 single dummy cylindrical lever, the BEST 9K Series 1DT Grade 1 heavy duty single dummy trim, the BEST 7KC Series 1DT Grade 2 medium duty single dummy trim, and the Callan Bentley Grade 2 dummy lever. Those give a facility three duty tiers to standardize on for inactive leaves.

Neither is a concern for the dummy itself. Backset only comes into play when there is a latch, and the half dummy has none. The Palmina family latch is adjustable 2-3/8 inch to 2-3/4 inch so it drops into standard door prep, but on the half dummy you are only fastening the rose to the door face. If the door is already bored for a lockset and you are swapping in a dummy, the rose covers the existing 2-1/8 inch cross bore.

The Palmina 488 meets ADA/ANSI 4.13.9 requirements. That is the lever-shape provision, operable without grasping, pinching, or twisting the wrist, which is why a lever gets specified over a knob on an accessible route. Worth noting for a dummy: since it does not operate a latch, the accessibility question on that opening usually falls to the catch or closer, not the trim.

Two finishes: Satin Nickel and Satin Chrome. They read differently side by side, satin nickel is warmer and slightly gold-toned, satin chrome is cooler and bluer, so on a run of doors pick the one already on the working locksets rather than mixing. The Palmina is a contemporary lever profile, which pairs with square or round modern roses better than with colonial-style trim.

A half dummy mounts one lever on one face of the door, which is what the Kwikset Palmina 488PLLLH provides for a left hand opening. A dummy pair puts a lever on both faces, for a door a user pushes and pulls from either side - Emtek catalogues that form in the Arts and Crafts lever dummy pair, the Hammered lever dummy pair, and the Classic Brass Cortina lever dummy pair. Count the faces that need a handle: one face takes a half dummy, two faces take a pair.

No, and it is the most common mix-up on a closet or french door order. A dummy such as the Kwikset Palmina 488PLLLH has no latch and does not move - it is a fixed pull. A passage lever rotates and throws a latchbolt: the Accentra 4601LN Grade 2 with Augusta trim, the Arrow GL01 Grade 2 Sierra lever for 1-3/4 inch to 2 inch doors, and the Design Hardware X75 Grade 1 flat lever for 1-3/4 inch doors are all passage function. Matching trim appearance between the two is normal practice; matching the part number is not.

Building an opening out of one trim family is the usual approach for a hallway or suite. The Baldwin Estate 5103 on the 5048 rose covers the full run: half dummy in left hand and right hand, passage, and privacy, so a closet, a bedroom and an inactive french door leaf all read the same. Accentra's Augusta trim spans the 455LN Grade 1 single dummy and the 5301LN Grade 2 passage. The Kwikset Palmina 488PLLLH half dummy itself comes in satin nickel and satin chrome.

A dummy lever cannot be keyed; the Kwikset Palmina 488PLLLH has no cylinder and no latch. For a keyed interior or office door, the set includes the Hager 2525 Grade 2 commercial entry lever for 1-3/8 inch to 2 inch doors, the Falcon B511CP6D Grade 2 entry/office lever, the Cal-Royal AG05 Grade 2 storeroom lever with deadlocking latchbolt for 1-3/8 inch to 1-3/4 inch doors, and the Dexter C1000 Grade 1 entry/office clutching lever. Trim style is chosen separately from function, so a keyed opening in the run does not force the rest of the doors to change.

The Kwikset Palmina 488PLLLH half dummy is a contemporary style lever. For a different design vocabulary on the same inactive leaf, Emtek catalogues dummy pairs in the Arts and Crafts lever, the Hammered lever, and the Classic Brass Cortina lever, and Baldwin catalogues the Estate 5103 half dummy on the 5048 rose in both hands. All are dummy function, so the choice between them is trim and handing rather than operation.