Kwikset 92360-001 236 Builder Pin Keying Kits - Small

The 92360-001 is a Kwikset pin keying kit, so it's the loose pinning stock a builder or locksmith uses to re-pin Kwikset residential cylinders and bring a group of locks onto one key. It's a keying kit, not a lock or a cylinder, so nothing in the box mounts in a door on its own. It's the small kit in the 236 builder line.

Residential. Kwikset lists the 236 builder pin keying kit on the residential side of its line, so it's aimed at the Kwikset locksets found on houses, apartments and rental units rather than at commercial mortise or cylindrical cylinders. A property manager rekeying a block of apartment entry knobs and deadbolts is the buyer this kit is built for; a facility standardizing commercial Grade 1 cylinders is not.

No. The Kwikset 236 builder pin kit is residential Kwikset pinning stock and won't serve an SFIC system. For interchangeable core work, ZenSupply carries GMS small format IC cores un-combinated, in 6-pin (IC6-26D) and 7-pin (IC7-26D), and the GMS Best SFIC straight mortise housing in 7-pin with a Yale cam (ICM7-ST) to mount one. Those are the parts an SFIC keying job actually needs.

No. The Kwikset 236 builder pin kit is a residential keying kit of key blanks and keying accessories built around Kwikset cylinders. Small format interchangeable core work is a different platform: the GMS 6-Pin Small Format IC Core and the GMS 7-Pin Small Format IC Core both ship un-combinated with keys, pins, springs and caps not included, so an SFIC bench needs SFIC-specific pins, springs and capping tools rather than a Kwikset builder pin kit.

Pinning kit only. The 92360-001 is stocked as a pin keying kit under key blanks and accessories, which means it supplies the keying components, not the cylinder they go into. If you need the housing as well, that's a separate order, and the same goes for the key blanks you'll cut to the new bitting.

The 92360-001 is the small size in Kwikset's 236 builder pin keying kit range, so it carries a smaller pin count than the larger kits in the same family. It suits a single rekeying job or a handful of doors rather than a builder pinning out a full subdivision. If you're keying a large block of units alike, step up to a bigger kit in the 236 range.

Beyond the 92360-001 pins you'll need the key blanks to cut, a plug follower and pinning tweezers, and a way to cut the new bitting. The kit supplies the pinning stock; it does not supply cylinders. If a lock you're pulling has a privacy latch you need to release without a key, ZenSupply stocks the Cal-Royal PDL-200 privacy door latch disengage tool in steel.

They serve different steps of a cylinder job. The Kwikset 236 builder pin keying kit is a keying kit filed with key blanks and keying accessories and is used to combinate Kwikset residential cylinders. The GMS KIT-PART04 is a collars kit for cylinder work, supplying the collars that set a cylinder at the correct depth in the door prep. One changes what key turns the cylinder; the other changes how the cylinder sits.

One configuration. The 236 builder pin keying kit small ships as model 92360-001 with no finish, size or handing choice to make, so there is nothing to specify on the order beyond the model itself.

No - that is an emergency-access task, not a keying task. The Cal-Royal PDL-200 is a steel privacy door latch disengage tool for privacy, bed and bath function latches and is the item for releasing a locked privacy set. The Kwikset 236 builder pin keying kit is a keying kit for combinating residential cylinders.