Kwikset 966SELLH.UNIV Left Hand Sedona Lever Interior Single Cylinder Handleset Trim for Both 800 and 687 Series Handlesets

Just the inside half. The Sedona lever trim is the interior portion of a single-cylinder handleset: you get the wave-style Sedona lever plus a thumbturn for the deadbolt. The keyed exterior handleset is a separate item, so this is what you order when you want a different inside lever, a different inside finish, or you are replacing damaged inside trim on a handleset that is otherwise fine.

It fits all Kwikset 800 and 687 Series single-cylinder handlesets, which covers a lot of the Signature Series line. It is a single-cylinder trim, so it pairs with a handleset where the exterior is keyed and the inside deadbolt is operated by thumbturn, not by a second key cylinder.

Stand outside the door and look at the hinges. Hinges on the left means left hand, and that is what 966SELLH.UNIV is built for. Handing matters on handleset trim because the lever and the escutcheon are oriented to the door swing, so a left hand trim on a right hand door will point the lever the wrong way.

It works with standard residential prep: adjustable backset of 2-3/8 inch or 2-3/4 inch, door thickness 1-3/8 inch to 1-3/4 inch, and 5-1/2 inch center-to-center between the lever bore and the deadbolt bore. That 5-1/2 inch spacing is the one to measure first. If your holes are drilled at a different spacing, the trim will not line up on both the lever and the thumbturn.

The Kwikset 966SELLH.UNIV Sedona lever interior trim is built specifically for left-hand doors, where the hinges sit on the left as viewed from outside, so it will not serve a right-hand opening. Among handed lever products, Baldwin's Estate 5103 is offered as a left hand half dummy lever with the 5048 rose and as a RIGHT hand half dummy lever with the same rose, so the handing is chosen at order time. Note that the Baldwin 5103 half dummy is a surface-mounted non-operating lever, not deadbolt handleset trim with a thumbturn.

The Kwikset 966SELLH.UNIV is the inside half of a single-cylinder handleset, pairing a Sedona lever with a thumbturn for the deadbolt. For an opening that only needs a latching lever with no deadbolt, a standalone passage set applies instead: the Baldwin Estate 5103 passage lever with 5048 rose, the Callan Asheville CLN-AH5011 Grade 3 passage leverset, or the Bravura Atlanta BVR-BV333002 Grade 2 passage leverset with round trim. None of those include a thumbturn.

The Kwikset 966SELLH.UNIV Sedona interior trim is a residential product certified to exceed ANSI/BHMA Grade 3. Commercial openings that call for a higher grade are served by heavy-duty cylindrical levers such as the Falcon K101 Grade 1 passage lock, which is fire rated and covers door thicknesses of 1-3/8 inch to 2-1/4 inch, the Corbin Russwin CL3110 Grade 1 vandal-resistant passage lever for 1-3/4 inch to 2 inch doors, or the Dexter C1000 Grade 1 passage lever for 1-3/8 inch to 1-3/4 inch doors.

No cylinder and no keying. The inside trim is non-keyed; the deadbolt is thrown and retracted from inside by the thumbturn, and all the keying lives in the exterior handleset cylinder.

It is residential-duty hardware, certified to exceed ANSI/BHMA Grade 3. For a high-traffic commercial opening you want a Grade 1 or Grade 2 cylindrical lockset instead, such as the Falcon K101 Grade 1 or the Hager 2525 Grade 2 entry lever. Property managers often use Sedona trim on unit front doors of single-family or townhome rentals and step up to commercial grade on common-area doors.

No. The Sedona handleset trim tops out at 1-3/4 inch. For a thicker slab you need a lockset rated past that, for example the Hager 2510 or Deltana 6201 at 1-3/8 to 2 inch, or the Falcon K101 which goes to 2-1/4 inch. Note those are complete locksets, not handleset inside trim.

Then this is the wrong part, because the Sedona 966 trim only mounts to an 800 or 687 Series handleset with the deadbolt bore at 5-1/2 inch centers. For a standalone interior door, look at a passage leverset such as the Callan Asheville Grade 3 or a Bravura passage lever like the Atlanta or Tampa, or a half dummy such as the Baldwin Estate 5103 left hand half dummy for a door that does not latch.

No. The Kwikset 966SELLH.UNIV combines a Sedona lever with a thumbturn and works with the keyed-entry exterior half of a Kwikset 800 or 687 Series handleset, so the lever retracts a latch and the thumbturn throws the deadbolt. Dummy trim such as the BEST 9K Series 1DT Grade 1 single dummy, the BEST 7KC Series 1DT Grade 2 single dummy, or the Callan Bentley CLN-BN5051 Grade 2 dummy lever is fixed and non-operating - it mounts as a pull only and drives no latch or bolt.

The Kwikset 966SELLH.UNIV is non-keyed inside trim that relies on a separate keyed handleset exterior. Where the opening should instead use a single keyed lever lockset, options include the Cal-Royal AUS00 Grade 3 entrance/office lever with a solid brass forged body for 1-3/8 inch to 1-3/4 inch doors, the Master Lock RL01 Grade 3 keyed entry lever in the return style, the Callan Artino CLN-360201 Grade 3 entrance leverset, or the Hager 2525 Grade 2 cylindrical entry lever for 1-3/8 inch to 2 inch doors.

The Kwikset 966SELLH.UNIV Sedona interior trim is designed for doors 1-3/8 inch to 1-3/4 inch thick, with an adjustable 2-3/8 inch or 2-3/4 inch backset and a 5-1/2 inch center-to-center between lever and deadbolt. For a thicker door, levers rated to 2 inch include the Hager 2510 Grade 2 passage lock at 1-3/8 inch to 2 inch, the Dexter C1000 asylum lock at 1-3/8 inch to 2 inch, and the Arrow GL01 Grade 2 passage lock at 1-3/4 inch to 2 inch.

Two: Satin Nickel and Matte Black. Pick the one that matches the exterior handleset you are pairing it with, since inside and outside trim are finished separately on a handleset.

The Kwikset 966SELLH.UNIV is mechanical, non-keyed Sedona lever trim with a deadbolt thumbturn. For keyless code entry on the opening, the Lockey 1150 heavy duty mechanical keypad lever set covers 1-1/8 inch to 2 inch doors, the Lockey 2835 mechanical pushbutton keyless lever lock is ADA compliant with a passage function for 1-3/16 inch to 2 inch doors, and the Delaney LP250 is a Grade 2 electronic keypad leverlock.

The Kwikset 966SELLH.UNIV uses a contemporary Sedona wave-style lever. For a more traditional look on the same opening, Deltana's entry levers include the 6201 Manchester, the 6411 Morant, and the 6431 Linstead, all covering door thicknesses of 1-3/8 inch to 2 inch, plus the 5851 Claremont entry lever. Emtek's Arts and Crafts and Hammered levers are also offered as dummy pairs.

Contemporary. The Sedona is a wave-profile lever, a clean curved shape rather than a scrolled or colonial one, which is why it tends to get specified alongside Matte Black and Satin Nickel trim packages on newer builds and renovations.