You may also like
L125 WITH MOUNTING HOLE FOR 3/8
Manufacturer Resources
Product Specs
- Cable Size:
- 1/0 STR to #8 SOL AWG
- Connection Type:
- Mechanical
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Product Group:
- Wire Connectors & Terminals
- Product Type:
- Mechanical Lug
- Selling Unit Of Measure:
- each
- Type2:
- Cable or wire lug
- Department:
- Electrical
- Product Subgroup:
- Lugs & Terminals
- Product Size:
- Length 1-1/2 in ; Width 3/4 in ; Height 3/4 in
- Installation Category:
- 3/8 inch Bolt
- Product Material:
- Tin-Plated Copper
Blackburn L125-38 – Frequently Asked Questions
1) What wire sizes will the Blackburn L125-38 lug accept?
The L125-38 mechanical lug takes conductors from 1/0 stranded down to #8 solid AWG, so one part covers most feeder and branch terminations in that band. Anything larger than 1/0 or smaller than #8 needs a different lug body.
2) Do I need a crimp tool for the Blackburn L125-38?
No crimper needed. It is a mechanical set-screw lug, so the conductor is stripped, inserted, and clamped with a wrench or hex key. That makes it the practical choice for field work and MRO repairs where nobody wants to haul a hydraulic crimper to the panel.
3) Is this Blackburn lug suitable for aluminum conductors or copper only?
The L125-38 body is tin-plated copper. The plating gives it corrosion resistance and lets it sit against aluminum bus without a bare copper-to-aluminum interface, but the listed conductor range is given as AWG sizes only, so size the conductor off the 1/0 STR to #8 SOL range rather than assuming a separate aluminum rating.
4) Will the L125-38 fit inside a crowded panel or gutter?
Overall it measures 1-1/2 by 3/4 by 3/4 inches, so it is a compact one-hole lug that fits typical panel gutters and equipment ground bars without fouling adjacent terminations. Allow bending radius for the conductor, which is usually the limiting factor rather than the lug itself.
5) Is the L125-38 insulated, or do I need to tape or boot it?
It ships bare, with no insulation on the body. Where the termination sits in a live compartment or needs to be finished to spec, plan on heat-shrink or an insulating boot over the barrel and the bolted pad.
6) Is the L125-38 sold individually or in a bag?
Sold each, so you order the exact count you need for the job instead of a fixed carton. For a standardized ground bar build, count one per conductor landed.
7) What is the correct part number to order this Blackburn lug under, and where is it made?
Order it as Blackburn L125-38, the L125 body with a 3/8 inch mounting hole. Country of origin is Mexico.
How fast can I get the Blackburn L125-38 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn L125-38 come with a warranty?
Absolutely. The Blackburn L125-38 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn L125-38?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn L125-38 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.