Product Overview

2032 PACER, CONCEALED IN ALUMINUM FRAME, HEAVY DUTY SINGLE LEVER TRACK CLOSER OVERVIEW

The concealed 2030 Series PACER® is a heavy duty closer designed to fit in a narrow, minimum 1 3⁄4" aluminum transom. The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements.

OVERVIEW

The heavy-duty 2030/5030/6030 Series Pacer closers are designed for concealment in a narrow minimum 1-3/4” aluminum transom, meeting ANSI/BHMA A156.4 Grade 1 and the American Disabilities Act (ADA) reduced opening force requirements. A forged steel single-lever arm for the 2030 and 6030 Series, a forged steel double-lever arm for the 5030 Series and roller assembly for all three series provide smooth, quiet door control, with separate regulation of general closing speed and latching speed. The 5030 Series arm joints and shoe adapt to uneven trim. All three series are UL and cUL listed for self-closing doors without hold-open and carry a 15-year limited warranty.

Materials for all three series include a cast iron cylinder; a one-piece forged steel piston; a high-efficiency, full-complement, low-friction bearing; tamper-resistant regulating screw and all-weather fluid. Optional plated finishes accent the arm, fasteners and finish plate for all three series.

FEATURES & BENEFITS

Body construction

Cast iron cylinder

Full-complement bearing

1-1/8” diameter piston

Quality and durability

All-weather fluid

Forged steel arm

15-year warranty

Installation

Designed to fit in a narrow header

2030 and 5030 Series have a handed design, 6030 Series has a non-handed design

2030 and 6030 Series have adjustable spring sizes 1-5, 5030 Series has adjustable spring sizes 1 and 3-6

SPECIFICATIONS

UL and cUL listed for self-closing doors without hold-open

Tested and certified under ANSI/BHMA A156.4 Grade 1

Spring power and latch speed adjustments are independent for either swing

Backcheck and general speed adjustments are common for both swings

Optional plated finish on arm and fasteners

Meets ADA requirements

Aluminum frames require 1-3/4” (44mm) x 4” (102mm) tube

DESIGNS & FINISHES

Standard or optional custom power coat finish

Optional plated finish

Optional SRI primer for installations in corrosive conditions available with powder coat only

MOUNTING/ARM OPTIONS

The 2030 Series mounts in the frame with a concealed track in the door. The 5030 Series mounts in the frame with an exposed double-lever arm. The 6030 Series mounts in the frame with a concealed track in the door. It is also a double-acting closer. Visit the 2030/5030/6030 Series catalog pages for mounting details, arm options and accessories.