LCN 8310-3860TW Wireless Touch...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,930.00
$1,461.51
LCN LCN 8310-3860TW Actuator Package, Logo, Text, Wireless, 4-1/2" Round LCN-8310-3860TW

LCN 8310-3860TW Wireless Touchless Actuator Package with 4-1/2" Round Wall Mount Design and Logo Display

(No reviews yet) Write a Review

Model: 8310-3860TW

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,930.00
$1,461.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

LCN 8310 Series Wireless Touchless Actuator Package with 4-1/2" Round Wall Mount Design and Logo Display

Complete Wireless Touchless Access Control Solution

The LCN 8310 Series wireless touchless actuator package provides a comprehensive contactless entry solution featuring 4-1/2" round wall mount actuators with logo and text display capabilities. This complete package includes dual wall mount actuators (8310-856T), surface mount boxes (8310-868S), weather/trim rings (8310-800), transmitters (8310-844), and receiver (8310-865) for immediate installation. Designed as part of Allegion's auto operator solutions, these touchless actuators eliminate the need for physical contact with door handles, push bars, or actuators while promoting hygiene and well-being in commercial facilities.

Professional Features & Benefits

  • Complete Package Solution: Includes all necessary components - (2) 8310-856T wall mount actuators, (2) 8310-868S surface mount boxes, (2) 8310-800 weather/trim rings, (2) 8310-844 transmitters, and 8310-865 receiver for comprehensive installation.
  • 4-1/2" Round Design: Professional round form factor with logo and text display capabilities for clear identification and branding opportunities in commercial applications.
  • Touchless Motion Detection: Advanced sensing technology detects hand waves in front of the wall plate, acknowledging intent to enter without requiring physical contact with any door hardware.
  • Wireless Operation: Eliminates complex wiring requirements between actuator and door operator while maintaining reliable communication through included transmitter and receiver components.
  • Weather-Resistant Construction: Includes weather/trim rings for enhanced durability and protection against environmental elements with stainless steel substrate construction.
  • Health and Safety Enhancement: Promotes hygiene and well-being by replacing traditional push buttons with contactless activation, ideal for facilities prioritizing infection control.
  • Professional Installation Ready: Surface mount boxes provide secure mounting foundation while maintaining clean, professional appearance with ADA compliant design.
  • 8310 Series Compatibility: Designed as part of LCN's comprehensive 8310 Series automatic operator solutions for versatile installation options.

Technical Specifications

  • ADA Compliant: Yes
  • Application: Actuator
  • Box: 8310-868S
  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Display Text: Push To Open
  • Electronic: Yes
  • Mounting Method: Surface Mount
  • Package: Yes
  • Package Qnty: 7
  • Parts and Accessories Type: Installation Accessories
  • Product Attribute: Parts and Accessories
  • Product Category: Electronic Access Controls
  • Product Color: Blue
  • Product Dimension: 4-1/2"
  • Product Group: Electronic Access Controls
  • Product Model: 8310-3860TW
  • Product Shape: Round
  • Product Subgroup: Parts and Accessories
  • Product Substrate: Stainless Steel
  • Product Type: Door Actuators & Plates
  • Relay Action: Momentary (MOM)
  • Series: 8310 Series
  • Subcategory: Closer Parts and Accessories
  • Symbol: Handicap
  • Touchless Activation: No
  • Transmitter: 8310-844
  • Weather Resistant: Yes
  • Wireless Communication: Yes

Professional Applications

  • Commercial Building Security Systems
  • Healthcare Facility Access Control
  • Educational Institution Safety Systems
  • Retail Loss Prevention
  • Industrial Facility Monitoring
  • Emergency Exit Compliance
  • Government and Municipal Buildings

Why Choose LCN Quality?

LCN 8310 Series touchless actuators deliver professional-grade reliability as part of Allegion's comprehensive auto operator solutions with stainless steel construction and weather-resistant design. The complete package approach ensures all necessary components including dual actuators, surface mount boxes, weather rings, transmitters, and receiver are included for immediate installation. Engineered for demanding commercial applications where dependable contactless performance and hygiene considerations are essential.

Product Specs

Series:
8310 Series
Box:
8310-868S
Display Text:
Push To Open
Relay Action:
Momentary (MOM)
Symbol:
Handicap
Transmitter:
8310-844
Application:
Actuator
Touchless Activation:
No
Subcategory:
Closer Parts and Accessories
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Product Type:
Door Actuators & Plates
Weather Resistant:
Yes
Commercial/Residential:
Commercial
Electronic:
Yes
Wireless Communication:
Yes
ADA Compliant:
Yes
Parts and Accessories Type:
Installation Accessories
Product Attribute:
Parts and Accessories
Package:
Yes
Package Qnty:
7
Product Model:
8310-3860TW
Product Color:
Blue
Product Dimension:
4-1/2"
Mounting Method:
Surface Mount
Product Shape:
Round
Product Category:
Electronic Access Controls
Product Substrate:
Stainless Steel
Department:
Door Hardware

LCN 8310-3860TW – Frequently Asked Questions

1) What exactly comes in the LCN 8310-3860TW touchless actuator package?
Seven pieces ship in the 8310-3860TW package: two 8310-856T wall mount actuators, two 8310-868S surface mount boxes, two 8310-800 weather/trim rings, two 8310-844 transmitters, and one 8310-865 receiver. That is a full two-sided opening (one actuator inside, one outside) with the wireless link included, so you are not sourcing boxes or a receiver separately.
2) Do I have to run wire from the push plate back to the door operator?
No wire between the actuator and the operator. The 8310-3860TW uses the included 8310-844 transmitters and 8310-865 receiver to carry the signal, so the plate locations only need their own power source and the receiver wires to the operator. That is the reason to pick this package over a hardwired plate when the actuator sits across a vestibule or on the far side of a finished corridor.
3) Can the LCN 8310 round actuator be surface mounted on a finished wall, or does it need a recessed back box?
Surface mount. The package includes two 8310-868S surface mount boxes, so the plate mounts on the wall face and no wall cutting or flush back box is required. Useful on block, tile, or existing finished drywall where you do not want to open up the wall.
4) Does the LCN 8310 actuator latch the operator on, or does it only trigger a single open cycle?
Momentary (MOM) relay action. Each activation sends one pulse to the low energy operator, which runs its own open and close timing, then the plate resets. It does not hold the door open, so if you need a hold-open or a maintained on/off state, this is the wrong device for that function.
5) Is this an actual wave-to-open touchless sensor, or a push plate?
The 8310-3860TW is activated by pressing the plate, not by waving a hand near it. Read the Push To Open legend on the face as the operating instruction it is. If your specification calls for genuine no-contact activation, you need a wave sensor rather than this package.
6) Are the LCN 8310 push plates ADA compliant for a barrier-free entrance?
ADA compliant, and marked with the handicap symbol, which is what an inspector looks for on an accessible entrance actuator. Bear in mind the plate is one half of the requirement; the door itself has to be on a low energy power operator for the actuator to do anything.
7) What is the closest alternative to the LCN 8310-3860TW actuator package if the wall plate needs to be square instead of round?
The LCN 8310-3860TW uses a 4-1/2 inch round plate. For the same 4-1/2 inch footprint in a square plate, the Camden CM-45 Series is a 4-1/2 inch square push plate switch. Both cover a similar plate area, so the decision is form factor and how the plate reads against the other switches already on the openings in the building.
8) The LCN 8310-3860TW is a wireless actuator package. What can be used on an opening where the switch will be hard wired to the operator?
The 8310-3860TW is built around wireless communication, pairing its 8310-844 transmitter with a receiver. Where a hard wired run back to the operator is preferred or already pulled, the Camden CM-45 Series push plate switch is offered wired or with a kinetic wireless transmitter, so the same plate covers either wiring approach on the job.
9) Will these LCN 8310 actuators hold up mounted outside the building?
Yes. The plates use a stainless steel substrate and the package includes two 8310-800 weather/trim rings, which is what makes the exterior side of the opening viable. Interior side gets the same hardware, so both plates in the package match.
10) What is the difference between the LCN 8310-3860TW package and the Camden CM-45 push plate switches?
Form factor and how you buy them. The 8310-3860TW is a complete seven piece two-plate kit, 4-1/2 inch round, with surface boxes, weather rings, transmitters and receiver all in the box. The Camden CM-45 Series is a 4-1/2 inch square plate switch offered either wired or with a kinetic wireless transmitter, so you configure the wiring approach per plate. Square versus round matters if you are matching plates already installed elsewhere in the building.
11) Can the Falcon 8310-819F be ordered in place of the LCN 8310-3860TW actuator package?
No. The 8310-819F is a mounting box only, a rugged plastic 1-1/2 inch by 4-3/4 inch rectangle for jamb and flush mounting. The 8310-3860TW is a seven piece package with the actuators, boxes, weather and trim rings, transmitters and receiver together. The two share the 8310 Series but the box is a component, so ordering it alone leaves the actuators and the transmitter and receiver still to buy.
12) For an actuator plate going on a fire rated opening, does the Camden CM-45 work?
The Camden CM-45 Series carries a fire rating of no, which matters when the switch is specified for an opening where the assembly rating governs the hardware. The LCN 8310-3860TW is a commercial, ADA compliant stainless steel actuator package with a momentary relay action; confirm the operator and opening requirements with the facility spec before settling either plate on a rated opening.
13) Which 4-1/2 inch actuator plate suits an exterior opening?
The LCN 8310-3860TW is weather resistant and includes 8310-800 weather and trim rings with stainless steel plate construction, which is the reason it is chosen for exposed exterior openings. The Camden CM-45 Series is a 4-1/2 inch square push plate switch offered wired or with a kinetic wireless transmitter, a straightforward choice for interior corridor and vestibule locations.
14) Can I use the LCN 8310 wireless actuator package on a fire rated door opening?
The 8310-3860TW is a commercial grade actuator package for low energy automatic operators. Fire door openings carry requirements on the door, frame and closing device that are decided by the operator and hardware on the door itself, not by the wall actuator. Spec the opening around the operator, and use this package as the activation device for it.
How fast can I get the LCN 8310-3860TW delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the LCN 8310-3860TW come with a warranty?
Absolutely. The LCN 8310-3860TW is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the LCN 8310-3860TW?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the LCN 8310-3860TW from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!