9531 Senior Swing, Electromechanical Power Door Operator with Track
The 9530 Senior Swing by LCN is an ADA Door Operator that is a two-in-one swing Door Operator. Senior Swing Operator when activated, opens doors automatically for wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Ordering Instructions (Specifying Header Length)
- Specify header length in 1/8" increments
- Header lengths 33 to 48" = HDR
- Header lengths 48.125" to 98" = HDR2
Overview
The low-energy Electromechanical Senior Swing Series Operators are LCN’s heaviest-duty version for high-abuse and high-traffic areas. The Senior Swing Series is backed by a 2-year limited warranty, is UL listed, meets ANSI/BHMA 156.19, the American Disabilities Act (ADA) and ANSI A117.1 requirements for accessibility.
Both the 9500 and 2800 Series ship with a standard header and optional customizable header lengths are offered. The Power boost provides additional closing force in severe wind. Push ‘N Go non-switch activation takes over when a pedestrian manually opens the Door to 5°, then holds the Door fully open for 1-30 seconds, depending on the time delay.
Body construction
- Motor gearbox driving mechanism for Operator
- Digital keypad
- Electromechanical unit with microprocessor control
Quality and durability
- Adjustable hold time of 1 to 30 seconds
- 2-year warranty
- Power Boost allows for increase closing force near latch
Installation
- Push ‘N Go permits non-switch activation
- Wood and machine screws
- Application-specific handed
Specifications
- Meets ADA requirements (power mode)
- UL listed
- Mounting styles include surface and Concealed
- Single-door or Double-door application
- Operator mounts as a simultaneous or independent pair for Double Door application
Designs and Finishes
- Standard anodized finish
- Standard Metal Cover
Mounting/Arm Options
The 9530 Series is a surface Mounted, single Door (pull side) application. The 9540 Series is a surface Mounted, single Door (push side) application. The 9550 Series is a surface Mounted, simultaneous Double Door application. The 9560 Series is a surface Mounted, independent Double Door application. The 2810 Series is a Concealed mount, single Door application. The 2850 Series is a Concealed mount, simultaneous Double Door application. The 2860 Series is a Concealed mount, independent Double Door application. Visit the 9500/2800 Series catalog pages for mounting details, Arm options and accessories.
Downloads and Resources
- LCN Full Line Catalog
- LCN Automatic Operator catalog section
- LCN 9530 Series catalog section
- LCN Electromechanical Automatic Operators data sheet
- Low Energy Automatic Operator Brochure
- Choosing the Right Automatic Operator
- LCN Installation Instructions/Templates Index
- Senior Swing Controller Programming Guide
Manufacturer Resources
Product Specs
- Category:
- Door Controls
- Series:
- 9530 Series
- ADA Compliant:
- Yes
- BAA Qualified:
- Yes
- Mounting Detail:
- Surface - Surface (Pull Side)
- Warranty:
- 2 Year
- Mounting:
- Surface
- Voltage:
- 120V/240V
- Mounting Location:
- Pull Side
- Subcategory:
- Power Operators - Electromechanical
- Product Group:
- Door Controls
- Product Subgroup:
- Power Operators
- Product Type:
- Power Operators - Electromechanical
- Finish Type:
- Plated
- Fluid Type:
- All-Weather
- Door Opening:
- 90 Degrees
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Model:
- 9531