You may also like
Leviton PIR Commercial Grade Occupancy Sensor, 120/277V AC
The Leviton PIR Commercial Grade Occupancy Sensor is a Decora®-style motion sensor engineered for commercial lighting control. Rated to cover up to 2100 sq. ft., this commercial grade device operates on 120/277V AC and uses passive infrared (PIR) detection to automatically control connected lighting based on room occupancy. Finished in Light Almond, it is available in the ODS10-IDT-P and ODS10-IDI-P configurations for flexible commercial installations.
Key Features
- Coverage Area: Detects occupancy across up to 2100 sq. ft. for dependable whole-room lighting control.
- Commercial Grade Construction: Built to commercial grade standards for reliable performance in high-traffic commercial environments.
- Dual Voltage Rating: Operates on 120/277V AC, supporting both standard and higher-voltage commercial circuits.
- PIR Detection Technology: Passive infrared sensing automatically switches lighting on and off based on occupancy, supporting energy savings.
- Decora® Style Design: Light Almond finish coordinates with Decora® wiring devices and wallplates for a consistent commercial aesthetic.
- Available Configurations: Offered in ODS10-IDT-P and ODS10-IDI-P models to match specific installation requirements.
Technical Specifications
- Grade: Commercial
- Voltage: 120/277V
- Coverage: 2100 Sq. Ft.
- Color: Light Almond
- Available Models: ODS10-IDT-P, ODS10-IDI-P
- List Batch: 377-VARMACHINE-20260803
Typical Applications
- Commercial and Institutional Buildings
- Automatic Lighting Control Retrofits
- Offices, Corridors, and Common Areas
- Energy-Efficient Lighting Upgrades
- New Construction Commercial Electrical Projects
Why Leviton?
Leviton commercial grade occupancy sensors are built to perform reliably in demanding commercial settings, combining PIR detection accuracy with a durable, commercial grade design. With 120/277V AC versatility and a Decora®-coordinated Light Almond finish, this sensor delivers dependable, code-conscious lighting control for professional electrical installations.
Manufacturer Resources
Product Specs
- Voltage Rating:
- 120/277V
- Grade:
- Commercial
- Product Type:
- Occupancy Sensor
- Product Finish:
- Light Almond
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Switches
Leviton ODS10-IDI – Frequently Asked Questions
1) Will the Leviton ODS10 occupancy sensor work on a 277V lighting circuit?
Yes. The ODS10 wall sensor is rated 120/277V AC, so the same device goes on a standard 120V branch circuit or a 277V commercial lighting circuit. That dual rating is why it suits offices, corridors and common areas where the lighting panel is 277V but restrooms or break areas may be 120V, you can standardize on one part number across the building.
2) How big a room will the Leviton ODS10 PIR sensor cover?
Coverage is up to 2100 sq. ft., enough for a whole open office bay, classroom or corridor run from a single wall switch location. It uses passive infrared detection, which needs line of sight to the occupant, so partitions, tall shelving or an L-shaped room will cut into that figure even though the rating is 2100 sq. ft.
3) What is the difference between Leviton ODS10-IDT and ODS10-IDI?
They are the same ODS10 wall-box PIR sensor in two device colors: ODS10-IDT is Light Almond and ODS10-IDI is Ivory. Pick the one that matches the Decora wiring devices and wallplates already on the job.
4) Should I use a wall switch occupancy sensor or a ceiling mount one?
A wall-box unit like the Leviton ODS10 replaces the existing switch and controls that switch leg, so it is the fast retrofit when the room is open and the sensor can see the door and the work area. Go to a ceiling sensor when the room has partitions, stalls or an irregular shape that blocks the view from the switch wall: the Pass & Seymour Wattstopper CI305 is a low-profile ceiling PIR with 360 degree coverage rated 1200 sq. ft., and the Wattstopper UT3053 is a 24V ceiling ultrasonic with 360 degree coverage rated 2000 sq. ft. for spaces where minor motion needs to be picked up out of line of sight.
5) What is the closest wall-mounted alternative to the Leviton ODS10-ID PIR occupancy sensor?
The Pass & Seymour PW-302 Wattstopper is the closest wall-box alternative, since it is also a PIR wall occupancy sensor rather than a ceiling unit. The difference is the relay count: the PW-302 is a dual-relay device, so it can switch two separate lighting loads from one wall opening, while the Leviton ODS10-IDT and ODS10-IDI are single-device Decora-style sensors rated 120/277V AC with 2100 sq. ft. of coverage. Pick the PW-302 when the room needs two switched circuits at one location; pick the ODS10-ID when one load and a Decora wallplate match is what the opening calls for.
6) If a room's occupants are mostly out of the sensor's line of sight, what should be used instead of the Leviton ODS10-ID?
The Leviton ODS10-ID uses passive infrared detection, which needs a clear line of sight from the wall box to the occupant. In rooms broken up by partitions, stalls, or tall casework, an ultrasonic ceiling sensor such as the Pass & Seymour UT3053 Wattstopper is the usual substitute - it is a 24V ceiling-mount ultrasonic unit with 360-degree coverage rated for 2000 sq. ft. Ultrasonic sensing does not depend on direct sight lines, but it is a ceiling device on a low-voltage circuit, so it needs a power pack rather than the 120/277V line connection the ODS10-ID uses.
7) Is a PIR sensor the right choice, or do I need dual technology?
PIR alone, as on the Leviton ODS10, keys on heat and movement and needs a clear view of the occupant. In rooms where people sit still for long stretches or where the sensor cannot see the whole space, a dual technology unit that adds ultrasonic sensing holds the lights on more reliably, the Pass & Seymour Wattstopper DT300 is a 24V, 360 degree dual technology ceiling sensor for that case. For open offices, corridors and common areas with normal traffic, PIR is the straightforward pick.
8) Can I use the Leviton ODS10 to switch two separate lighting loads?
No. The ODS10 is a single-load wall sensor. If you need one sensor to control two circuits independently, such as a general lighting load plus a separate exhaust fan or a second row of fixtures, use a dual-relay wall sensor instead, the Pass & Seymour Wattstopper PW-302 is a PIR dual-relay wall occupancy sensor built for that.
9) Is the Leviton ODS10 rated for commercial use or is it a residential device?
It is a commercial grade device, built for high-traffic commercial and institutional buildings rather than residential duty. Typical placements are offices, corridors and common areas, plus new construction and automatic lighting control retrofits.
10) Is a Wattstopper CI305 ceiling sensor a direct replacement for a Leviton ODS10-ID?
No. Both are PIR sensors, but they mount in different places and cover different areas. The Leviton ODS10-IDT and ODS10-IDI install in the wall box as Decora-style devices at 120/277V AC with up to 2100 sq. ft. of coverage. The Pass & Seymour CI305 Wattstopper is a low-profile ceiling PIR sensor with 360-degree coverage rated for 1200 sq. ft. Swapping one for the other means relocating the device to the ceiling and reworking the wiring, so treat the CI305 as a different design approach, not a drop-in.
11) For a conference room with occupants who sit still for long stretches, is there a better choice than the Leviton ODS10-ID?
Consider a dual-technology sensor such as the Pass & Seymour DT300 Wattstopper, a 24V ceiling occupancy sensor with 360-degree coverage that combines two sensing technologies to hold lights on during small movements. The Leviton ODS10-ID is single-technology PIR, which reads infrared motion from the wall box and covers up to 2100 sq. ft. The DT300 is a ceiling-mounted low-voltage device requiring a power pack, while the ODS10-ID wires directly to a 120/277V AC circuit in the existing switch box, which keeps a retrofit inside the wall opening.
12) Which occupancy sensor keeps a retrofit simplest when only the existing wall switch box is available?
The Leviton ODS10-ID is the simplest of the group for that situation. It is a commercial grade Decora-style PIR sensor that wires to a 120/277V AC circuit and replaces the existing switch in the wall box, with no ceiling work and no separate low-voltage power pack. The ceiling alternatives - the Pass & Seymour CI305 PIR, the UT3053 ultrasonic, and the DT300 dual technology - all mount overhead, and the UT3053 and DT300 run at 24V. Choose the ODS10-ID when the job is a switch-for-switch upgrade; it comes in Light Almond as the ODS10-IDT and Ivory as the ODS10-IDI to coordinate with existing Decora devices.
13) Will a Leviton ODS10 sensor fit behind a standard Decora wallplate?
Yes. The ODS10 is a Decora-style device, so it drops into a standard single-gang opening and takes a Decora rocker-opening wallplate. In Light Almond (ODS10-IDT) or Ivory (ODS10-IDI) it lines up with the rest of the Decora devices in the gang.
How fast can I get the Leviton ODS10-IDI delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Leviton ODS10-IDI come with a warranty?
Absolutely. The Leviton ODS10-IDI is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Leviton ODS10-IDI?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Leviton ODS10-IDI from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.