Leviton ODC Series PIR Commerc...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$89.62
Leviton ODC Series PIR Commercial Grade Line Voltage Occupancy Sensor

Leviton ODC Series PIR Commercial Grade Line Voltage Occupancy Sensor

(No reviews yet) Write a Review

Model: ODC0S-I1W

In Stock (leaves warehouse same day if ordered before 3pm ET)

$89.62
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Leviton ODC Series PIR Commercial Grade Line Voltage Occupancy Sensor

The Leviton ODC Series PIR Commercial Grade Line Voltage Occupancy Sensor is a passive-infrared (PIR) occupancy sensor engineered for commercial-grade performance on direct line-voltage circuits. Part of Leviton's ODC Series, this sensor is designed to automatically detect occupant motion and control connected lighting loads, with coverage available up to 530 sq. ft. Its line-voltage design allows it to switch loads directly without a separate low-voltage power pack, simplifying installation in commercial spaces.

Key Features

  • Detection Coverage: Occupancy sensing coverage up to 530 sq. ft., suited for standard commercial rooms and spaces.
  • PIR Technology: Passive-infrared sensing detects occupant motion for automatic lighting control.
  • Commercial Grade Construction: Built for the demands of frequent use in commercial and office environments.
  • Line Voltage Operation: Connects directly to line-voltage circuits, eliminating the need for a separate low-voltage power pack.
  • ODC Series Design: Part of Leviton's ODC Series occupancy sensor lineup for consistent performance and compatibility.
  • Automatic Lighting Control: Helps reduce energy waste by switching lighting off in unoccupied spaces.

Technical Specifications

  • list_batch: LEV-20260730
  • Coverage Area: Up to 530 sq. ft.
  • Technology: PIR (Passive Infrared)
  • Voltage Type: Line Voltage
  • Series: ODC

Typical Applications

  • Commercial Offices and Workspaces
  • Conference and Meeting Rooms
  • Restrooms and Break Rooms
  • Hallways and Corridors
  • Energy Code Compliance Retrofits
  • New Commercial Construction

Why Leviton?

Leviton builds its ODC Series occupancy sensors to commercial-grade standards, giving facility managers and electrical contractors a dependable way to automate lighting control and reduce unnecessary energy use. The line-voltage design simplifies installation, while PIR detection technology delivers consistent, accurate occupancy sensing for demanding commercial environments. Choosing Leviton means specifying an occupancy sensor built for reliable, code-compliant performance in professional electrical installations.

Manufacturer Resources

Technical Information

Product Specs

Product Type:
Occupancy Sensor
Voltage Rating:
120V
Grade:
Commercial
Product Color:
White
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Switches

Leviton ODC0S-I1W – Frequently Asked Questions

1) How big a room will the Leviton ODC Series PIR sensor cover?
Coverage runs up to 530 sq. ft., which suits a private office, a small conference room, a restroom, or a break room. For open areas well past that footprint, a wider-coverage ceiling sensor is the right call - the Pass & Seymour CI305 Wattstopper PIR ceiling sensor is rated 360 degrees at 1200 sq. ft., and the UT3053 ultrasonic covers 2000 sq. ft.
2) PIR or ultrasonic occupancy sensor - which should I use for a restroom or a room with partitions?
PIR, like the Leviton ODC0S-I1W, works on line of sight to body heat and motion. That is fine for an open office, a corridor, or a small room where the sensor can see the occupant. Where stalls, partitions, or an L-shaped layout block the view, a PIR will drop the lights on someone who is still there. In those spaces an ultrasonic sensor such as the Pass & Seymour UT3053 Wattstopper, or a dual-technology unit like the DT300 that combines both sensing methods, holds occupancy better.
3) Can I wire the Leviton ODC Series sensor on a 277V lighting circuit?
No. The ODC0S-I1W is rated 120V. On a 277V branch circuit feeding fluorescent or LED fixtures you need a sensor rated for that voltage, or a low-voltage ceiling sensor paired with a 277V power pack.
4) Is a 24V ceiling sensor a drop-in replacement for the Leviton ODC0S-I1W?
No. The Leviton ODC0S-I1W is a line-voltage sensor rated 120V that switches the lighting load directly, without a separate low-voltage power pack. The Pass & Seymour DT300 Wattstopper dual technology ceiling sensor and the Pass & Seymour UT3053 Wattstopper ceiling mount ultrasonic sensor are both 24V devices, which means the control circuit and the load switching are handled through a power pack rather than at the sensor. Swapping one for the other changes the wiring of the circuit, not just the device.
5) What covers a larger room than the Leviton ODC0S-I1W occupancy sensor?
The Leviton ODC0S-I1W is a PIR occupancy sensor with coverage up to 530 sq. ft. For a larger open area, the Pass & Seymour CI305 Wattstopper low-profile ceiling PIR sensor covers 360 degrees up to 1200 sq. ft., and the Pass & Seymour UT3053 Wattstopper ceiling mount ultrasonic sensor covers 360 degrees up to 2000 sq. ft. Both of those are ceiling-mounted units, so the ceiling has to be available for the device and the wiring routed to it.
6) Is the Leviton ODC0S-I1W rated for commercial use or is it a residential sensor?
Commercial grade. Leviton builds the ODC Series to commercial standards for offices, conference rooms, corridors, and restrooms where the device gets cycled hard every day, and it is the type of control specified into energy-code retrofits and new commercial construction.
7) When should I use a dual technology or ultrasonic sensor instead of the Leviton ODC0S-I1W?
The Leviton ODC0S-I1W uses passive infrared detection, which relies on line-of-sight to occupant motion - good for offices, conference rooms, corridors and break rooms where the sensor can see the occupants. In spaces with partitions, stall dividers or occupants doing minor motion only, a different sensing technology is often specified: the Pass & Seymour UT3053 Wattstopper is ultrasonic, and the Pass & Seymour DT300 Wattstopper is dual technology, combining sensing methods in one ceiling device. Both of those are 24V units, so plan the power pack and wiring accordingly.
8) I need a PIR sensor for a commercial space - what is the difference between the Leviton ODC0S-I1W and the Pass & Seymour CI305?
Both are passive infrared occupancy sensors for commercial use. The Leviton ODC0S-I1W is a commercial grade line-voltage unit rated 120V in white, covering up to 530 sq. ft., and it switches the load directly without a power pack. The Pass & Seymour CI305 Wattstopper is a low-profile ceiling-mounted PIR with 360 degree coverage up to 1200 sq. ft. The practical decision is mounting location and room size: the Leviton suits standard commercial rooms on a line-voltage circuit, while the CI305 is the choice when you want a ceiling device looking down over a wider area.
9) What color is the Leviton ODC0S-I1W and will it match my other devices?
White. It is a single-model item, so white is the only finish offered on the ODC0S-I1W. If the rest of the openings in the space are ivory or light almond, this one will not match.
10) What is the Leviton part number for this ODC occupancy sensor?
Order it as Leviton ODC0S-I1W. That is the manufacturer part number for the white, 120V, line-voltage PIR unit in the ODC Series covering up to 530 sq. ft.
11) Where do I find the wiring and mounting details for the Leviton ODC sensor?
Leviton publishes technical information for the ODC Series as a PDF, and it is the right reference for wiring configuration and mounting before the electrician sets it. Pull it here: https://zensupply.com/content/pdf/leviton/technical-information-7e3497.pdf
How fast can I get the Leviton ODC0S-I1W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Leviton ODC0S-I1W come with a warranty?
Absolutely. The Leviton ODC0S-I1W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Leviton ODC0S-I1W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Leviton ODC0S-I1W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!