Thomas & Betts LTGUS08G-A LFMC GP UL 2-1/2IN GRY 8M/25FT

Each coil of the LTGUS08G-A is 25 feet (8 meters) of 2-1/2 inch liquid tight flexible metallic conduit. If you are running a longer feed, order in multiples of 25 feet and plan your connector locations around the coil length, since the trade size is large and field-splicing a run this size means another pair of liquidtight fittings at each joint.

Use it where the run has to flex or absorb vibration and where moisture is a factor: the final connection to a rooftop RTU, a chiller or large motor, a pump skid, or a wet or washdown area. Rigid or EMT carries the straight runs; the liquidtight steel flex takes the last few feet into the vibrating equipment so conduit threads and enclosure hubs don't fatigue. At 2-1/2 inch you're typically feeding a large motor, panel or mechanical unit.

Yes, the LTGUS08G-A is supplied as a single 25 foot (8 meter) coil, not cut lengths, so a run up to 25 feet is unbroken with a connector only at each end.

Grey is the standard general-purpose jacket color for LFMC and is what most commercial and industrial specs call for, so it matches existing runs on a typical mechanical room or rooftop install. The jacket is the liquidtight element, not decoration; keep it intact and seat it fully into the fitting gland so the seal is made at the connector.