Lithonia Lighting ECRG HO RD M6 LITH ECRG HO RD M6 Thermoplastic LE

Yes, in all three orientations. The ECRG HO RD M6 offers top, side and back mounting, with the pattern on the canopy (top and side) and on the back plate (back mount) sized to fit most standard junction boxes. It is a surface-mount sign, so there is no recessed or flush option.

Yes. The ECRG has an internal switch for red or green letter color, and the fully assembled single-face unit ships with an extra faceplate plus red and green panel inserts. That means one part number covers both color requirements, which is useful if you standardize stock across a portfolio where some jurisdictions call for green.

It is dual-voltage, 120/277V at 60Hz, rated 120-277V. Wire it to whichever of the two is at the opening without ordering a different part, which simplifies standardizing across a building with mixed panels.

Yes. The ECRG HO RD M6 is UL Listed and meets the applicable requirements of UL 924, NFPA 101 (current Life Safety Code), NFPA 70 (NEC), FCC Title 47 Part 15 Subpart B, OSHA and CA Title 20. On loss of AC power the integral battery provides a minimum of 90 minutes of illumination at the rated wattage, which is the code-required duration for emergency lighting.

Only where conditions stay within an indoor damp location at 50 to 104 degrees F (10 to 40 degrees C). It is an indoor fixture, so an unheated stairwell that drops below 50F, an exterior entry, or a wet location needs a sign rated for cold or wet service instead.

The sign measures 16.46 x 2.05 x 7.24 inches (listed in the features as 16.5 x 2.05 x 7.25 in). The 2.05 inch figure is the shallow dimension, so projection off the wall or ceiling is minimal when surface mounted. Check the long dimension against the clear space above or beside your opening before committing to top versus side mount.

A 3.6V maintenance-free rechargeable nickel metal hydride battery is built in. Maintenance-free means no electrolyte service, though you still owe your monthly and annual function tests under your facility's life safety program. The LED lamp source has a typical life of 10 years.

It ships fully assembled as a single-face unit, with an extra faceplate and both red and green inserts in the box. If an opening needs letters legible from two directions, you need a sign configured double-face, not this one as shipped.

The housing is bright white thermoplastic. It is a clean white surface-mount body rather than a brushed metal or architectural edge-lit sign, so in a high-finish lobby it will read as standard code hardware. For back-of-house, education, healthcare, retail and office corridors that is normally exactly what the spec calls for.

Order Lithonia Lighting ECRG HO RD M6. That is the manufacturer part number for the single model, the HO denoting high output and M6 the carton quantity designation used by Lithonia. Light output is rated at 85 lumens.