Klein Tools 69127 Low-Voltage ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$78.63
$28.63
Klein Tools 69127 Low-Voltage Tester

Klein Tools 69127 Low-Voltage Tester

(No reviews yet) Write a Review

Model: 69127
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$78.63
$28.63
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Low-Voltage Tester

  • Features

    • Deluxe 3.5-Inch (89 mm) long handle with nylon top holds replaceable bulb
    • Pointed 3.75" (9.5 cm) Probe Makes Checking Easier.
    • Pointed 3-3/4-Inch (95 mm) probe makes checking easier
    • 36'' (914 mm) test lead with alligator clip
    • Bulb in handle glows when circuit is complete (bulb included)
    • Device for checking live 6-24V, AC or DC circuits
    • Tests for shorts in automotive and truck electrical systems, motor field coils, radio and low-voltage circuits, ground circuit of all lamps, wiring, fuses, etc.

  • Warnings

    • Always wear approved eye protection.


69127 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Overall Length:
43.25" (109.9 cm)
Department:
Electrical
Product Group:
Test & Measurement
Product Subgroup:
Voltage Testers
Product Type:
Contact Voltage Tester
Product Details:
Low-Voltage Tester
Product Height:
1.0000 in
Product Weight:
0.0130 lbs
Product Width:
1.0000 in
Product Depth:
43.2500 in
Country Of Origin:
United States

Klein Tools 69127 – Frequently Asked Questions

1) What voltage range does the Klein Tools 69127 tester check?
The 69127 continuity-style tester is built for live 6 to 24 volt circuits, AC or DC. It is not a line-voltage tester, so keep it off 120/240V branch circuits. Typical use is automotive and truck electrical systems, motor field coils, radio and other low-voltage wiring, plus ground circuits on lamps and fuses.
2) How do you know when the Klein 69127 tester shows a complete circuit?
A bulb inside the handle lights up when the circuit is complete. There is no display or beeper, just the lamp, so you read it by eye. The bulb is included and it is replaceable, held by the nylon top on the 3.5 inch (89 mm) handle.
3) Is the Klein 69127 the right tool for checking 120V household receptacles?
No. The 69127 is rated for 6 to 24 volt circuits only. For 120V or 240V branch circuits you need a line-voltage tester or a non-contact voltage tester instead. Use the 69127 for 12V and 24V automotive, truck, doorbell, thermostat and similar low-voltage work.
4) How long is the lead on the Klein 69127 low-voltage tester?
It comes with a 36 inch (914 mm) test lead ending in an alligator clip, which you clamp to ground or one side of the circuit while you probe with the handle. Overall length of the tool as supplied is 43.25 inches (109.9 cm), so you can reach across a dash or an engine bay without moving the clip.
5) Can the 69127 probe reach into a fuse block or a crowded terminal strip?
The probe is pointed and 3-3/4 inches (95 mm) long, which is what lets you get down onto fuse clips, spade terminals and screw terminals without stripping insulation back. The point pierces through to the conductor on small-gauge low-voltage wire.
6) Will the Klein 69127 find a short in a motor field coil or a lamp ground circuit?
Yes, that is one of its stated uses. Clip the 36 inch lead to a known good ground or reference point and probe the suspect leg; the handle bulb glowing tells you the path is complete. Klein lists it for shorts in automotive and truck systems, motor field coils, radio and low-voltage circuits, and the ground circuit of lamps, wiring and fuses.
7) What does a fleet or MRO buyer need to know about replacing the bulb on the 69127?
The bulb sits in the handle under a nylon top and is a replaceable item, so a dead lamp does not scrap the tester. Keep spares with the tool if it lives in a service truck. Klein also states to always wear approved eye protection when using it.
8) What part number do I order for the Klein low-voltage circuit tester with the alligator clip lead?
Klein Tools part number 69127. It is a single-configuration item, one model, no finish or length options to specify.
How fast can I get the Klein Tools 69127 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 69127 come with a warranty?
Absolutely. The Klein Tools 69127 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 69127?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 69127 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!