Electronic AC/DC Voltage Tester, 12 to 600V
ET60 - spec sheet
Warnings
- Never use the tester on a circuit with voltages that exceed the category based rating of this meter.
- Before each use, verify tester operation by measuring a known voltage.
- Do not use the tester or test leads if they appear to be damaged.
Features
- Inherent low input impedance reduces the possibility of falsely reading ghost or stray voltages on non-energized circuits
- Easy to use bright LED display clearly reports the voltage present in the circuit being tested
- Uses standard replaceable multimeter test leads for versatility
- CAT IV 600V modern solid-state design for safety
- No Batteries Required
- Voltage Tester for AC/DC voltage from 12-600V at nine useful levels aligned with commonly used voltages
- Integrated test-lead holders are used for lead storage or for holding the probes correctly spaced for insertion into tamper-resistant US-style outlets
- Batteries not required, as tester is powered by the applied voltage in the circuit being tested
ET60 - spec sheet
Manufacturer Resources
Product Specs
- Accessories:
- 5139C, 5139PAD
- Display:
- LED
- Drop Protection:
- 9.8' (3 m)
- Frequency:
- 45Hz to 66Hz
- Ingress Protection:
- IP54
- Interchangeable Leads:
- Yes
- Item Depth:
- 5.6700 in
- Item Height:
- 1.4400 in
- Item Weight:
- 0.2000 lbs
- Item Width:
- 2.3500 in
- Overall Height:
- 1.44" (3.7 cm)
- Overall Length:
- 5.67" (14.4 cm)
- Overall Width:
- 2.84" (7.2 cm)
- Pollution Degree:
- 2
- Standard:
- CAT IV 600V
- Type:
- Solid-State, Low Impedance, Electronic Voltage Tester
- Voltage:
- 12 to 600 V AC/DC
- Weight:
- 3.20 oz (92.00 g)