You may also like
MALE TAB 90 DEG .250X.032
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Disconnects
- Product Type:
- Non-Insulated Male Disconnect with 90 Degree Bend
- Department:
- Electrical
- Product Group:
- Wire Termination
Sta-Kon 681-54419 – Frequently Asked Questions
1) Is the Sta-Kon 681-54419 male disconnect insulated or bare metal?
It's a non-insulated (bare) male disconnect tab. There's no nylon or vinyl sleeve over the barrel, so if the connection needs to be covered you'll have to add a separate insulating sleeve or heat shrink over the crimp.
2) Will a standard 1/4 inch female disconnect plug onto this Sta-Kon male tab?
Yes. With a .250 x .032 blade, it accepts the common 1/4 inch female quick-disconnect used throughout appliance, motor and control wiring. Confirm the female terminal is rated for your wire gauge separately, since gauge capacity is set by the barrel, not the tab.
3) Why would I use a 90 degree male tab instead of a straight one?
The 681-54419 has the tab bent 90 degrees off the crimp barrel, so the wire runs perpendicular to the mating blade. That's what you use when the female disconnect has to come in from the side, or when you're tight against a panel wall or enclosure face and a straight terminal would force the wire into a sharp bend.
4) What part number do I order for the Sta-Kon 90 degree male tab?
Order Sta-Kon 681-54419. That's the manufacturer part number for the non-insulated 90 degree male disconnect with a .250 x .032 tab, and it's the single configuration offered.
5) Is the Sta-Kon 681-54419 made in the USA?
Yes, country of origin is the United States. That matters if you're buying under a domestic-sourcing requirement on a government or institutional job.
How fast can I get the Sta-Kon 681-54419 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon 681-54419 come with a warranty?
Absolutely. The Sta-Kon 681-54419 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon 681-54419?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon 681-54419 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.