Marks USA MAR195F 195F Storero...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$335.31
$168.99
Marks USA Marks USA 195F Storeroom Lever Lockset - Grade 1 Survivor Series, American Lever 195F

Marks USA MAR195F 195F Storeroom Lever Lockset — Grade 1 Survivor Series, American Lever, ADA Compliant

(No reviews yet) Write a Review

Model: 195F-26D
$335.31
$168.99
Selected Finish is
Selected Keying is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$335.31
$168.99
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Marks USA 195F Storeroom Lever Lockset — Grade 1 Survivor Series, ADA Compliant

The Marks USA 195F Storeroom Lever Lockset is a commercial-grade cylindrical lock engineered for demanding storeroom applications requiring controlled outside access. Operating under ANSI Function F86, the outside knob/lever remains always locked and rigid while the inside lever remains always free, with the deadlocking latchbolt retracted by key from outside or by rotating the inside lever. Built to exceed BHMA Grade 1 specifications by 300% — surpassing 3.6 million cycles — this 195 Series lockset features a unique stainless steel clutch mechanism and bronze bearings that dramatically reduce wear, resist abuse, and eliminate lever droop. The front measures 1-1/8" x 2-1/4" with a 2-3/4" backset and a 9/16" latch throw, and is backed by the Marks lifetime mechanical warranty.

Key Features

  • Exceptional Durability — 3.6 Million Cycles: Exceeds BHMA Grade 1 specifications by 300%, tested to over 3.6 million cycles for unmatched long-term reliability in high-traffic commercial environments.
  • Stainless Steel Clutch & Bronze Bearings: Unique internal clutch mechanism combined with bronze bearings dramatically reduces wear and abuse while eliminating lever droop for consistent, smooth operation.
  • ANSI Function F86 — Storeroom: Outside knob/lever is always locked and rigid; latchbolt is retracted by key from outside or by rotating the inside lever, which remains always free — ideal for storeroom security.
  • Precise Dimensional Specifications: Features a 1-1/8" x 2-1/4" front size, 2-3/4" backset, and 9/16" latch throw for accurate door preparation and reliable fit.
  • ANSI Strike Included: Supplied with an ANSI-standard 1-1/4" x 4-7/8" strike with 1-1/4" lip and square corner for a complete, code-compliant installation.
  • ADA Compliant Lever Design: American lever style meets ADA accessibility requirements, making it suitable for public and commercial facilities requiring accessible hardware.
  • Lifetime Mechanical Warranty: Backed by the Marks lifetime mechanical warranty, providing long-term confidence and protection for commercial installations.
  • Competitively Priced for Value: High-quality, longer-lasting, lower-maintenance design delivers exceptional value without compromising professional-grade performance.

Certifications & Compliance

  • ANSI/BHMA Grade 1 — Exceeds specification by 300% (3.6 million cycles)
  • UL Listed
  • ADA Compliant
  • ANSI Function F86 (Storeroom)
  • Marks Lifetime Mechanical Warranty

Technical Specifications

  • Series: 195 Series
  • Latch Throw: 9/16"
  • Product Group: Mechanical Locks
  • Product Subgroup: Bored Locksets
  • Product Type: Cylindrical Locks
  • Subcategory: Cylindrical Locks
  • ANSI/BHMA: ANSI/BHMA, UL Listed
  • Commercial/Residential: Commercial
  • Lock Type: Cylindrical
  • Function Description: Outside knob/lever always locked/rigid. Latchbolt retracted by key in outside knob/lever or by rotating inside knob/lever. Inside knob/lever always free. Deadlocking latchbolt.
  • Front Size: 1-1/8" x 2-1/4"
  • ADA Compliant: Yes
  • ANSI Function: F86
  • Product Attribute: Cylindrical Locks
  • Strike Classification: ANSI, 1-1/4" x 4-7/8", 1-1/4" Lip, Square Corner
  • Product Category: Mechanical Locks
  • Backset (Distance): 2-3/4"
  • Department: Door Hardware

Typical Applications

  • Commercial Office Building Storerooms and Supply Closets
  • Educational Facility Storage and Utility Rooms
  • Healthcare Institution Medication and Supply Storage
  • Retail Establishment Back-of-House and Stockroom Doors
  • Industrial and Warehouse Facility Controlled Access Areas
  • Multi-Tenant Residential Property Common Storage Areas
  • Government and Municipal Building Secure Storage Rooms

Why Marks USA 195F?

Marks USA 195 Series cylindrical locksets are engineered to outperform the competition, exceeding BHMA Grade 1 specifications by 300% with a tested life of over 3.6 million cycles. The proprietary stainless steel clutch and bronze bearing construction delivers a higher-quality, longer-lasting, and lower-maintenance solution that resists the wear and abuse of demanding commercial environments. For facilities that require dependable storeroom security with ADA-compliant lever access, the Marks USA 195F is a proven, professional-grade choice.

Manufacturer Resources

Marks USA Product Catalog

Product Specs

Series:
195 Series
Latch Throw:
9/16"
Grade:
Grade 1
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Product Type:
Cylindrical Locks
Subcategory:
Cylindrical Locks
ANSI/BHMA:
ANSI/BHMA, UL Listed
Commercial/Residential:
Commercial
Lock Type:
Cylindrical
Function Description:
Outside knob/lever always locked/rigid. Latchbolt retracted by key in outside knob/lever or by rotating inside knob/lever. Inside knob/lever always free. Deadlocking latchbolt.
Front Size:
1-1/8” x 2-1/4”
ADA Compliant:
Yes
ANSI Function:
F86
Product Attribute:
Cylindrical Locks
Product Function:
Storeroom
Latch Type Specification:
Deadlocking
Strike Classification:
ANSI, 1-1/4" x 4-7/8", 1-1/4" Lip, Square Corner
Product Category:
Mechanical Locks
Backset (Distance):
2-3/4"
Department:
Door Hardware

Marks USA 195F-26D – Frequently Asked Questions

1) What does the Marks USA 195F storeroom function actually do when someone tries the outside lever?
The outside lever on the 195F is always locked and stays rigid, so pulling or turning it does nothing. Entry from outside is by key only. The inside lever is always free, so anyone in the room walks out by turning the lever, no key needed. That is ANSI Function F86, and it's why this goes on supply closets and stockrooms that have to stay secure but can never trap somebody inside. The latchbolt is deadlocking, so it can't be shimmed or carded once the door is closed against the strike.
2) Will the Marks 195F fit my existing door prep and 2-3/4 inch backset?
The 195F is built to a 2-3/4 inch backset, which is the standard commercial bore spacing, and the latch front measures 1-1/8 x 2-1/4 inches. If your door is prepped for a 2-3/8 inch backset (common on residential and some older interior doors), this lock will not drop in without re-boring the edge. Check the distance from the door edge to the center of the cross bore before you order.
3) Will the Marks 195F latch into the strike that's already in my frame?
It depends what's cut in there now. The 195F throws a 9/16 inch deadlocking latchbolt and ships with an ANSI strike measuring 1-1/4 x 4-7/8 inches, with a 1-1/4 inch lip and square corners. If your frame already has that ANSI cutout (standard on hollow metal commercial frames), the supplied strike drops straight in. If the frame carries a small T-strike or a full-lip residential strike, you'll be enlarging the frame prep or filling and re-cutting it.
4) Can I get the Marks 195F keyed alike across a set of storeroom doors?
Yes. Keying is chosen on the order: keyed different, so each lock has its own key, or keyed alike, so one key opens every lock in the group. Keyed alike is the usual pick for a property manager standardizing storage and utility rooms across a building. If you run your own masterkey system, order the Less Cylinder model instead and install your existing cores.
5) Is the Marks 195F rated heavy enough for a high traffic storeroom?
It's a Grade 1 commercial cylindrical lockset and UL Listed, which is the top ANSI/BHMA tier for cycle life and strength. Marks tests the 195 Series past 3.6 million cycles, and the mechanism uses a stainless steel clutch with bronze bearings so the outside lever spins free under force rather than transferring abuse into the lock, which is what kills lever droop. For a stockroom door getting hit hundreds of times a day, that's the specification you want on the submittal.
6) Which cylindrical lever locks look like a Marks USA 195F but will not secure a storeroom?
Several bored levers share the same cylindrical footprint yet cannot hold a storeroom door secure. Dummy trim is the clearest one: the Dorma C501 is a Grade 2 single dummy trim keyless lever and the Orca OCL2170 is a Grade 2 half dummy lever, both fixed trim with no latch at all. Privacy function is the other: the Cal-Royal CAL20 is a Grade 1 privacy/bed/bath lock and the Schlage CO-100 is a Grade 1 heavy duty privacy function electronic lock, both intended to be released from inside rather than keyed from outside. The 195F keeps the outside lever always locked and rigid with the latchbolt retracted only by key from outside, which is what a storeroom needs.
7) Is the Marks 195F lever ADA compliant for a public building?
Yes. The 195F uses an American lever design and is listed as ADA compliant, so it operates without tight grasping, pinching, or wrist twisting. That matters on storerooms in schools, healthcare, and government buildings where accessible operating hardware is required on the occupied side. Egress is by lever from inside with no key and no separate operation.
8) Should I use a keyed storeroom lock or an electronic keypad lock on a supply room?
A mechanical storeroom lock like the Marks 195F is the right call when access is controlled by who holds a key, there's no power at the door, and you don't need a record of entries. It has no batteries and nothing to program. Go electronic when you need to issue and revoke access without recutting keys or want an audit trail: the Alarm Lock Trilogy T2 DL2700 is a Grade 1 standalone cylindrical keypad lock with 100 user codes, and the Alarm Lock T3 DL3075 adds an audit trail. Both fit doors 1-5/8 to 1-7/8 inches on the DL2700.
9) I need matching levers on the passage and privacy doors next to my storeroom. Can I use the 195F for those?
No. The 195F is storeroom function only, so the outside lever is permanently locked and takes a key. For a door that just needs to latch and push open, or one that needs a thumbturn, you need a different function entirely. The Cal-Royal CAL30 is a Grade 1 passage lockset and the Cal-Royal CAL20 is a Grade 1 privacy lockset, both fitting 1-3/8 to 2 inch doors. For a keyed office or entrance door, the Dorma C853 is a Grade 1 entrance lever for 1-3/8 to 2-1/4 inch doors.
10) Do I have to buy a strike separately for the Marks 195F?
No, the strike is included. It's an ANSI 1-1/4 x 4-7/8 inch strike with a 1-1/4 inch lip and square corners. What you supply is the keying decision at order time, and on the less cylinder version, the cylinder or core itself.
11) I am keying a building to one system. Can I buy a Marks USA 195F less cylinder, and which alternatives take an interchangeable core?
The Marks USA 195F is offered in a Less Cylinder model alongside the standard model in US3 bright brass, US10B oil-rubbed dark bronze, US26 polished chrome and US26D satin chrome, with keying selected as keyed different, keyed alike, or none for the less core build. Among the peers, the Alarm Lock Trilogy T2 DL2700 states IC/SFIC compatibility, and the Stanley Security QCL150 is supplied less cylinder as well, so all three can be finished on a house keying system rather than shipping with a factory cylinder.
12) I need audit trail or credential control on a storeroom instead of a mechanical key. What cylindrical locks do that where a Marks USA 195F would go?
The 195F is a mechanical cylindrical lock with a keyed outside lever, so it records nothing. In the same bored prep, the Alarm Lock T3 DL3075 is a Grade 1 electronic cylindrical lock with audit trail and keypad access. The Schlage NDEB is a Grade 1 heavy duty ENGAGE Series cylindrical lock with a 2.4 GHz Bluetooth Low Energy reader and mobile enabled multi-function operation, for doors 1-5/8 to 2 inch thick. The TownSteel FCE-2000 is a Grade 1 heavy duty standalone motorized cylindrical lockset with RFID for 1-3/4 inch doors. All three trade the 195F mechanical simplicity for credential management and power.
13) The door does not need to be keyed, just latched shut. What replaces a Marks USA 195F storeroom lock on a non-keyed opening?
The 195F is a keyed storeroom lock, so on an opening with no key requirement the function is the wrong one. For a heavy duty non-keyed lever, the Cal-Royal CAL30 is a Grade 1 passage function cylindrical lockset with a 1-3/8 to 2 inch door thickness range. If the door only needs to be held closed at medium duty, the Orca Hardware OCL210 is a Grade 2 passage cylindrical lockset. Passage function leaves both levers free at all times, which is the opposite of the 195F, where the outside lever is always locked and rigid.
14) I want to drop the keys and use a code on a storeroom door. What takes the place of a Marks USA 195F?
The 195F retracts its latchbolt by key in the outside lever. To get the same bored cylindrical prep with code entry instead, the Alarm Lock Trilogy T2 DL2700 is a Grade 1 standalone electronic cylindrical lock with a digital keypad, 100 user codes and IC/SFIC compatibility, on doors 1-5/8 to 1-7/8 inch thick. The TownSteel XCE-2000 is a heavy duty Grade 1 electronic cylindrical lockset with a keypad in classroom function for doors 1-3/4 to 2 inch thick. The BEST 9KZ EZ Series adds a keypad with key override, so a mechanical key still works alongside the code.
15) Does a Marks USA 195F alternative need to be ADA compliant for a public facility, and which peers are lever operated?
The Marks USA 195F uses an American lever and is ADA compliant, which is what an accessible opening in a public or commercial facility requires. Lever operated peers include the Dorma C853 entrance lever, the Dorma CL701 Grade 2 single dummy non-keyed lever, the Stanley QCL150 Sierra bent lever, the Lockey E985 and E995 electronic keypad lever locks, and the Kwikset 912TNL ZW500 SmartCode Tustin lever. Knob operated units such as the Lockey 1600 heavy duty mechanical keyless knob lock and the Lockey 2830 mechanical pushbutton keyless knob lock are a different operating trim from the 195F lever.
16) The storeroom door has to release on an access control signal. What goes in place of a Marks USA 195F?
The 195F is a mechanical lock with no electrical connection, retracted by key or by the inside lever. For an opening tied into access control, the SDC Electra 7200 Series is a solenoid controlled cylindrical lock running dual voltage 12/24VDC on doors 1-3/4 to 2 inch thick, so the latch is released by the panel rather than by a key. The SDC E75 Series is a battery powered electronic cylindrical lockset with keypad access control for doors 1-3/4 to 2-1/8 inch, which keeps the credential at the door instead of running wire to it.
17) Does the Marks 195F need to be handed when I order it?
No handing to specify. The 195F is ordered by finish, model (standard or less cylinder), and keying only. That's one less thing to get wrong on a multi-door order, and it means a spare on the shelf covers either swing.
18) What finishes does the Marks 195F storeroom lever come in?
Four: US3 bright brass, US26 polished chrome, US26D satin chrome, and US10B oil-rubbed dark bronze. US26D satin chrome is the usual choice for matching existing commercial hardware in schools, offices, and healthcare, since most back-of-house lever hardware is specified that way. All four are available in both the standard keyed and less cylinder versions.
How fast can I get the Marks USA 195F-26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Marks USA 195F-26D come with a warranty?
Absolutely. The Marks USA 195F-26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Marks USA 195F-26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Marks USA 195F-26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!